Manufacturing Engineer II

3 weeks ago

Tulsa, United States MUNCIE POWER PRODUCTS INC Full time
Job DescriptionJob Description

At Muncie Power, our products play a critical role in our society by powering the vehicles that develop key infrastructure, putting out dangerous fires, fixing the power lines that power our homes, and hauling away our garbage.

Every team member at Muncie Power understands how important the success of our customers is to their communities. And that inherent value is carried throughout each team to ensure we’re providing the best for our customers.

WHAT YOU’LL DO

Analyzing problems and developing solutions for manufacturing-related problems is where you strive. As an industrial engineer, you can work cross-functionally with teams to create company-wide improvements in the manufacturing process.

  • Lead the development of new or modified manufacturing processes and methods to reduce production costs, improve efficiency, and quality, and facilitate processing
  • Lead in updating and maintaining process routing systems to include proper routing sequences utilizing the preferred machining or assembly selection, tooling identification, and efficiency factors to provide minimum product cost
  • If required, direct and instruct production personnel on process changes, tooling modifications, program changes, expected output, and other information
  • Lead the review of the product design releases of existing and new parts and assemblies, and recommend design changes that will facilitate product manufacturing or reduce costs
  • Perform industrial engineering activities to provide manufacturing technical assistance, guidance, and services.
  • Develop and maintain work standards including floor studies by prescribed time study methods
  • Estimate work standards and time values when required
  • Write elemental descriptions for each operation
  • Perform the analysis to establish allowances and new job standards due to changes in engineering, methods, materials, tooling, equipment, or job content
  • Utilize Lean Manufacturing or Six Sigma methodology.
  • Mentor or train other industrial engineers on improvement methodologies
  • Work with teams to mistake-proof methods and processes
  • Responsible for researching, evaluating, recommending, and justifying replacement in the purchasing of additional machine or assembly tools including any peripheral equipment
  • Perform preparation of manufacturing cost estimates
  • Collect and analyze data for statistical process control
  • Conduct capability studies
  • Complete corrective action requests
  • Research opportunities for material, machine, and tooling improvements
  • Conduct and process FEMAs for machining or assembly operations
  • Assist in the writing of QMS work instructions

YOUR EXPERIENCES & SKILLS

  • Bachelor’s degree in industrial, manufacturing, or other applicable engineering area
  • At least five (5) years of experience in a precision machining manufacturing environment
  • Green Belt Lean/Six Sigma certification or three (3) years working knowledge of Lean/Six Sigma principles and tools
  • Knowledge of manufacturing functions, including methods, processing, tooling, work standards, plant layout, and cost controls and reduction
  • Knowledge and skills to learn to develop and implement CNC part programming to effectively support machining and robotic operations and assembly processes
  • Knowledge of part holding or fixture design
  • Ability to read and comprehend detailed drawings, sketches, notes, and blueprints
  • Knowledge of metric dimensions
  • Ability to communicate effectively, both orally and in writing
  • Self-motivated with a strong desire to succeed
  • Flexibility to effectively adapt to changing conditions and job assignments
  • Ability to work well with others

BENEFITS

  • Medical, dental, and vision insurance, and zero card
  • Life, death, dismemberment, and dependent insurances
  • Prescription drug programs
  • Telehealth
  • Short-term and long-term disability, and flexible leaves of absence
  • Employee assistance programs
  • 401k (match 50% on the first 6% of deferred compensation) and flexible spending plans
  • 3 weeks of paid time off
  • 9 paid holidays
  • Wellness & Engagement

LOCATION: Tulsa, OK

DEPARTMENT: Manufacturing

WORK ENVIRONMENT: Manufacturing/Warehouse

REPORTS TO: Senior Industrial Engineer

SHIFT TYPE: Monday–Friday (5-8s)

WORKPLACE ARRANGEMENT: On-site

SUPERVISES: N/A

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

Safety Notice

This position is considered a safety-sensitive position due to "the operation of a motor vehicle, other vehicles (forklift), equipment, machinery or power tools or the repairing, maintaining or monitoring the performance or operation of any equipment, machinery or manufacturing process, the malfunction or disruption of which could result in injury or property damage.”

This description is intended to describe the general content of and requirements for the performance of this position. It is not to be construed as an exhaustive statement of duties, responsibilities, or requirements.

Muncie Power Products is an Equal Opportunity Employer.

  • Manufacturing Engineer II

    2 weeks ago

    Tulsa, Oklahoma, United States Aquestia Full time

    Job OverviewPosition Summary:The Manufacturing Engineer II plays a crucial role in delivering exceptional solutions and support throughout the manufacturing lifecycle of control valves. In this capacity, you will serve as the primary technical resource for the production and manufacturing teams, swiftly addressing challenges and introducing innovative...

  • Production Engineer II

    4 weeks ago

    Tulsa, United States Aquestia Full time

    Job DescriptionJob DescriptionPosition Summary:The Production Engineer II is responsible for providing outstanding solutions and support in the manufacturing process of control valves. In this position, you will be the technical go to person for the production and manufacturing teams, responsible for quickly solving issues and providing new ideas for better...

  • Industrial Process Engineer II

    1 week ago

    Tulsa, Oklahoma, United States MUNCIE POWER PRODUCTS INC Full time

    Job OverviewAt Muncie Power Products, our innovations are essential in supporting the infrastructure that keeps our communities thriving. Our commitment to excellence ensures that we provide the highest quality products to our customers, which in turn benefits their localities.KEY RESPONSIBILITIESAs a Manufacturing Engineer II, you will focus on identifying...

  • Manufacturing Engineer

    3 weeks ago

    Tulsa, United States Lloyd Richards Personnel Full time

    Job DescriptionJob DescriptionManufacturing Engineer - $101,000+ (BS in Industrial Engineering and 10 years minimum experience)Oversees the technical aspects of developing, establishing, testing, and improving manufacturing systems and methods including, but not limited to automation and improvement of processing equipment, material handling equipment,...

  • Manufacturing Engineer

    3 months ago

    Tulsa, United States William H Hunter Recruiting Full time

    Job DescriptionJob DescriptionSeeking an experienced Manufacturing Engineer with solid Machining experience. Apply knowledge of Process/Quality systems and tools to set up, test, and adjust manufacturing machinery and equipment, using any combination of electrical, electronic, mechanical, hydraulic, pneumatic and computer technologies by performing the...

  • Manufacturing Engineer

    2 months ago

    Tulsa, United States Zobility Full time

    Job Description: Under general direction, responsible for complex planning activities related to equipment layouts in plant, office, and production facilities. Conducts studies that determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production facilities and personnel. Prepares cost estimates...

  • Manufacturing Engineer

    2 months ago

    Tulsa, United States Zobility Full time

    Job Description: Under general direction, responsible for complex planning activities related to equipment layouts in plant, office, and production facilities. Conducts studies that determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production facilities and personnel. Prepares cost estimates...

  • Manufacturing Engineer

    2 months ago

    Tulsa, United States zobility Full time

    Job Description: Under general direction, responsible for complex planning activities related to equipment layouts in plant, office, and production facilities. Conducts studies that determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production facilities and personnel. Prepares cost estimates...

  • Senior Manufacturing Engineer

    2 weeks ago

    Tulsa, Oklahoma, United States MUNCIE POWER PRODUCTS INC Full time

    Job OverviewAt Muncie Power Products Inc, our solutions are vital to the infrastructure that supports our communities, powering vehicles that contribute to essential services, combating fires, maintaining electrical systems, and managing waste.Every member of our organization recognizes the significance of our clients' success and its impact on their...

  • Manufacturing Mechanical Engineer

    1 week ago

    Tulsa, Oklahoma, United States Jobot Full time

    Join Our Team as a Mechanical EngineerWe are a leading manufacturing firm in search of a Mechanical Engineer with a strong background in HVAC systems. If you are enthusiastic about designing, managing, and improving mechanical systems, we would love to connect with you.Key Responsibilities:Work closely with the production team to optimize manufacturing...

  • Manufacturing Process Engineer

    2 weeks ago

    Tulsa, Oklahoma, United States International Staff Consulting Full time

    Position Overview:As a Manufacturing Process Engineer, you will play a crucial role in enhancing operational efficiency and productivity within our organization. Your primary responsibility will be to assess and design workflows and systems that optimize production processes.Key Responsibilities:- Analyze and design operational workflows to enhance...

  • Manufacturing Engineer

    3 weeks ago

    Tulsa, United States Client Growth Resources, Inc Full time

    Environment: Industrial Manufacturing Location: Tulsa, OK Reports To: Vice President of Manufacturing Compensation Range: Competitive Compensation Plan Degree Requirements: Bachelors Citizenship: Must be a U.S. Citizen or Green Card Holder and able to work for any U.S. Employer Relocation Package: Yes Benefit Package: Yes Experience Level: 5+...

  • Project Engineer in Manufacturing

    2 weeks ago

    Tulsa, Oklahoma, United States Experis Full time

    Position Overview:We are looking for a skilled Project Engineer specializing in manufacturing processes. In this role, you will collaborate with the Production team to drive Continuous Improvement initiatives and optimize industrial operations.Key Responsibilities:As a Project Engineer, your primary duties will include:1. Developing and assessing...

  • Manufacturing Process Engineer

    2 weeks ago

    Tulsa, Oklahoma, United States Lincoln Search Consultants Inc Full time

    Position OverviewAs a key player in our organization, the Manufacturing Process Engineer will focus on the analysis and design of operational workflows to enhance efficiency across the production facility. This role entails the development, testing, and implementation of integrated systems aimed at streamlining industrial production processes.Key...

  • Manufacturing Process Engineer

    2 weeks ago

    Tulsa, Oklahoma, United States Lincoln Search Consultants Inc Full time

    Position Overview:As a Manufacturing Process Engineer, you will play a pivotal role in the analysis and design of operational workflows aimed at enhancing efficiency across production facilities. Your responsibilities will include the development and testing of integrated systems that manage industrial production processes effectively.Key...

  • Electronic Manufacturing Support Engineer

    3 months ago

    Tulsa, United States Levare USA Full time

    Job DescriptionJob DescriptionPosition SummaryPlan and conduct work requiring judgment in the independent evaluation, selection and substantial adaptation and modification of standard techniques, procedures and criteria. Devise new approaches to problems encountered. Develop and sustain electrical products offered by the company.Job Functions/Duties (may be...

  • Engineer II

    3 months ago

    Tulsa, United States Agente Full time

    Job DescriptionJob DescriptionDesign, development, testing, manufacturing and certification of aircraft structures, component parts and related component systems and subsystems for operational aircraft.CATIA V5 experience requiredComposite design experience requiredTechnical Bachelor level degree in Engineering or the sciences or equivalent and three (3) to...

  • Machinist II

    2 weeks ago

    Tulsa, Oklahoma, United States Aviation Technology Associates LLC Full time

    Company Overview:Aviation Technology Associates LLC is seeking a skilled Machinist II to join our team. This role is essential in supporting our operations through the creation and maintenance of high-quality tooling.Position Overview:Under general supervision, the Machinist II will be responsible for the layout and construction of tools based on engineering...

  • Machinist II

    2 weeks ago

    Tulsa, Oklahoma, United States Aviation Technology Associates LLC Full time

    Aviation Technology Associates (AVTECH) is seeking a Machinist II.Position Overview:Under general supervision, the Machinist II will layout and fabricate tools based on engineering designs, technical drawings, and/or sketches. This role involves calculating the necessary materials for tasks.Key Responsibilities:Core Duties: Set up and operate machinery to...

  • Engineer II

    4 weeks ago

    Tulsa, United States ONEOK Full time

    Performs intermediate level engineering and/or project management duties related to one or more functional areas that may include: pipeline system planning and analysis, gathering system operation, gas and liquids measurement, gas analysis, and measu Measurement, Engineer, Pipeline, Project Management, Processing, Manufacturing, Construction