Aluminum Fabricator
1 week ago
This is a challenging role that requires a skilled and experienced individual to join our team at Eastern Shipbuilding Group. As an Aluminum Fabricator, you will be responsible for laying out and fabricating metal structural parts, such as plates, bulkheads, and frames. You will also be responsible for bracing them in position within the hull of ships for riveting or welding.
Key Responsibilities- Regular attendance at work and the ability to work flexible hours, including overtime, weekends, and holidays.
- Comply with company, Federal, State, and local safety, ethics, and environmental rules, regulations, and policies while performing duties.
- Layout position of parts on metal, working from blueprints or templates and using scribe and hand tools.
- Locate and mark reference lines, such as center, buttock, and frame lines.
- Align parts in relation to each other, using jacks, turnbuckles, clips, wedges, and mauls.
- Mark the location of holes to be drilled and install temporary fasteners to hold the part in place for welding or riveting.
- Prepare molds and templates for fabrication of nonstandard parts.
- Install packing, gaskets, liners, and structural accessories and members, such as doors, hatches, brackets, and clips.
- Tack welding clips and brackets in place prior to permanent welding.
- Accountable for completion of daily work assignments.
- Flag cranes and pull angle iron as required.
- Work with minimal supervision.
- Perform other duties as assigned.
- High school diploma or GED equivalent, plus three to five years of shipfitting experience desired.
- Knowledge of materials, methods, and the appropriate tools to construct marine vessels is required.
- Must have experience working with aluminum.
- An equivalent combination of education and experience may be considered.
- Must be able to cut and burn with a torch or plasma cutter.
- Tack weld with stainless rods, mig, and aluminum.
- Requires knowledge of ship terminology, safety, and OSHA regulations.
- Ability to read and comprehend written, oral, or diagram forms.
- Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.
- Ability to read and understand blueprints.
- Knowledge of safe operation and use of hand and power tools.
- Ability to add, subtract, multiply, and divide into all units of measure.
- Ability to read a tape measure.
- Integrity, ethics, flexibility/adaptability, initiative, interpersonal skills, attention to detail, safety-conscious, and multitasking.
- Maintain the confidential integrity of details pertaining to Eastern Shipbuilding Group.
The employee is regularly required to communicate. The employee is frequently required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the workday. The employee must frequently lift and/or move up to 50 pounds.
Work EnvironmentThe work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee may be exposed to the risk of electrical shock, moving mechanical parts, vibration, fumes, airborne particles, toxic or caustic chemicals, continual loud noise, and other hazards found in a heavy industrial shipyard environment. Rigorous compliance with safety procedures, policies, and personal safety equipment requirements is therefore mandatory.
-
Metal Fabrication Specialist
2 weeks ago
Panama City, Florida, United States Intelligen Full timeWelder Position OverviewThe role involves the fabrication of diverse sheet metal products, following detailed schematics, directives, and organizational standards.Key Responsibilities:Utilize welding machinery to manipulate carbon steel, stainless steel, and aluminum materialsDemonstrate expertise in TIG and MIG welding methodsInterpret and visualize...
-
Sheet Metal Welding Technician
2 weeks ago
Panama City, Florida, United States Intelligen Full timeWelder Position OverviewThe role involves the fabrication of diverse sheet metal components by interpreting technical drawings, following specific instructions, and adhering to company standards.Key Responsibilities:Utilize welding machinery to manipulate carbon steel, stainless steel, and aluminum materialsDemonstrate expertise in TIG and MIG welding...
-
Welder Specialist
2 weeks ago
Panama City Beach, Florida, United States Eastern Shipbuilding Group Full timeJob Summary:As a skilled Welder Specialist at Eastern Shipbuilding Group, you will play a critical role in the fabrication and assembly of complex structural forms. Your expertise in welding and fitting will be essential in ensuring the quality and safety of our products.Key Responsibilities:Layout, fit, and weld fabricated cast and forged components to...
-
TIG Pipe Welder Specialist
2 weeks ago
Panama City Beach, Florida, United States Eastern Shipbuilding Group Full timeJob TitleTIG Pipe Welder 1/CLocationPanama City, FL US (Primary)Job TypeFull-timeEducationHigh School / GEDTravelNoneSecurity Clearance RequiredNoneJob OverviewPOSITION SUMMARYThe role involves planning, laying out, welding, installing, testing, and repairing various types of piping and similar tubular products in compliance with specifications, codes, and...
-
TIG Pipe Welder Specialist
2 weeks ago
Panama City Beach, Florida, United States Eastern Shipbuilding Group Full timePosition TitleTIG Pipe Welder 1/CLocationPanama City, FL US (Primary)Job TypeFull-timeEducationHigh School / GEDTravelNoneSecurity Clearance RequiredNoneJob OverviewPurpose and Scope of JobThis job description outlines the fundamental responsibilities and functions of the position and is not intended to serve as an employment contract. The requirements,...
-
Aluminum Fabrication Specialist
2 weeks ago
Kansas City, Missouri, United States RightWorks Staffing Full timeJob Title: Aluminum Fabrication Specialist Shift: 5a-330p Compensation: $19 per hour Employment Type: Temp to hire position Number of Positions: 1 Key Responsibilities: The role involves the fabrication of commercial aluminum doors and frames, utilizing industrial saws, CNC machinery, and MIG welding techniques. Primary Duties: Measure aluminum extrusions...
-
Aluminum Shipfitter 1/C
1 week ago
Panama City, United States Eastern Shipbuilding Group Full timeJob Title Aluminum Shipfitter 1/C Location Panama City, FL US (Primary) Job Type Full-time Education High School / GED Travel None Security Clearance Required None Job Description Job Description INTENT AND FUNCTION OF JOB DESCRIPTION This job description is a general description of the essential job functions and is not an employment contract. Position...
-
Welder/Fabricators>
2 months ago
Scott City, United States Manpower Inc Full timeManpower - JobID: 5617692 [Fabricator] As a Fabricator at Manpower, you'll: Measure aluminum extrusions to be cut for fabrication; Assemble cut aluminum and hardware into doors and frames; Check material against orders and visually inspect incoming materials; Use power tools including electrical, hydraulic and air powered industrial machines...Hiring...
-
Metal Fabrication Technician
1 week ago
Bossier City, Louisiana, United States Gordon, Inc. Full timeFabrication TechnicianGordon, Inc. is looking for a proficient Fabrication Technician to enhance our production capabilities. The ideal candidate will possess a strong background in interpreting technical drawings and fabricating components to exact specifications. As a Fabrication Technician, your responsibilities will include maintaining a tidy workspace,...
-
Fabricator
4 months ago
Bossier City, United States Gordon, Inc. Full timeJob DescriptionJob DescriptionJob Summary: The Fabricator will maintain a neat and orderly work area and fabricate parts to tolerance based on the requirements of the blue print. When there are any discrepancies with the prints or the parts the fabricator must notify the team leader.Duties/Responsibilities:Read and interpret shop orders, including...
-
Fabricator
4 months ago
Bossier City, United States Gordon, Inc. Full timeJob DescriptionJob DescriptionJob Summary: The Fabricator will maintain a neat and orderly work area and fabricate parts to tolerance based on the requirements of the blue print. When there are any discrepancies with the prints or the parts the fabricator must notify the team leader.Duties/Responsibilities:Read and interpret shop orders, including...
-
Fabricator
4 months ago
Bossier City, United States Gordon, Inc. Full timeJob Summary: The Fabricator will maintain a neat and orderly work area and fabricate parts to tolerance based on the requirements of the blue print. When there are any discrepancies with the prints or the parts the fabricator must notify the team leader. Duties/Responsibilities: Read and interpret shop orders, including drawings. Verify correct raw...
-
Metal Fabrication Technician
2 weeks ago
Bossier City, Louisiana, United States Gordon, Inc. Full timeFabrication TechnicianGordon, Inc. is in search of a talented Fabrication Technician to enhance our operations. The successful applicant will possess a strong background in interpreting technical drawings and crafting components to exact specifications. As a Fabrication Technician, your duties will include maintaining an organized workspace, ensuring...
-
Fabricator
3 months ago
Salt Lake City, United States Kawneer Company, Inc. Full timeJob Description$1,000 Sign-On Bonus After 90 Days! Starting at $20 per hour, full benefits from Day 1! Arconic is currently in search of a Fabricator to join our Kawneer Building and Construction Systems Team in Salt Lake City, UT. At Arconic, we are looking for people who share our values of integrity, inclusion, and diversity, and who demonstrate...
-
Metal Fabrication Technician
2 weeks ago
Pine City, Minnesota, United States Aerotek Full timeJob OverviewPosition Title: Fabrication SpecialistAs a Fabrication Specialist, you will oversee the complete fabrication process, which includes constructing docks and lifts, as well as creating custom components for educational institutions, wellness facilities, and various public structures. Your role will involve interpreting blueprints to accurately...
-
Metal Fabricator
4 months ago
Kansas City, United States AGS & HANDRAILS CORPORATION Full timeJob DescriptionJob DescriptionWe are a manufacturing firm located in the West Bottoms area of downtown Kansas City, Missouri who has been in business for over 35 years. We are needing to hire a full-time, dependable Metal Fabricator who has a minimum of 3 years experience in reading fab shop drawings to layout metal pipe, tubing and bar for saw cuts and...
-
Fabrication Welder
1 week ago
Bay City, United States Intelligen Full timeJob DescriptionJob DescriptionJob Title:Welder This position is responsible for fabricating various sheet metal products utilizing drawings, instructions and company guidelines. Primary Accountabilities*: •Operate welding equipment to work with carbon steel in various thicknesses in horizontal and vertical positions (stainless steel and aluminum also as...
-
Metal Fabrication Specialist
2 weeks ago
Kansas City, Missouri, United States PeopleLink Staffing Solutions Full timeJob OverviewPeopleLink Staffing Solutions collaborates with a leading organization in the Manufacturing sector. We are seeking a skilled metal fabrication specialist who excels in MIG and TIG welding techniques and possesses the capability to interpret technical drawings.Position Details:Compensation: $20.75 per hour based on experience and print reading...
-
Metal Fabrication Technician
2 weeks ago
Pine City, Minnesota, United States Aerotek Full time**Job Title: Metal Fabrication Technician** **Job Overview** The selected candidate will oversee the complete fabrication process, which includes constructing docks and lifts, as well as creating custom components for educational institutions, health facilities, and various public structures. Precision and meticulous attention to detail are essential as you...
-
Welder Fabricator
2 weeks ago
Union City, United States Maleko Personnel Full time $30 - $31Job DescriptionJob DescriptionWe are seeking a Welder Fabricator to become an integral part of our team!Responsibilities:Manufacture and fabricate finished metal productsInstall and repair various equipment and componentsFollow blueprints to meet product specificationsCalculate material measurements to verify specificationsConduct tests to evaluate weld...
-
Welder - Fabrication Specialist
6 days ago
Kansas City, Kansas, United States Allegiant Manufacturing Full timeJob SummaryAllegiant Manufacturing, a leading provider of metal working solutions, is seeking an experienced Welder to join our Fabrication Department. As a key member of our team, you will be responsible for setting up and operating welding machines to produce high-quality fabricated metal products.Key ResponsibilitiesSet up and operate welding machines to...
-
Structural Metal Fabricator
2 weeks ago
Missouri City, Texas, United States AnchorCM Full timeJob OverviewSalary: $35.00 per hourPosition Summary: AnchorCM is seeking skilled Ironworkers to enhance our workforce. The preferred candidate will possess a Certificate of Qualification in their respective trade and have a minimum of 3 years of experience in large-scale industrial projects. Experience in sawmill operations or wood processing facilities is...
-
Structural Metal Fabricator
2 weeks ago
Missouri City, Texas, United States AnchorCM Full timeJob OverviewSalary: $35.00 per hourPosition Summary: AnchorCM is seeking skilled Ironworkers to enhance our workforce. The ideal candidate will possess a Certificate of Qualification in their specific trade and have a minimum of 3 years of experience in large-scale industrial settings. Preference will be given to those with backgrounds in sawmill operations...
-
Structural Metal Fabricator
1 week ago
Missouri City, Texas, United States AnchorCM Full timeJob OverviewSalary: $35.00 per hourPosition Summary: AnchorCM is seeking skilled Ironworkers to enhance our workforce. The ideal candidate should possess a Certificate of Qualification in their specific trade and have a minimum of 3 years of experience in large-scale industrial projects. Preference will be given to those with experience in sawmills or wood...
-
Senior Prototype Fabrication Specialist
6 days ago
Maryland City, Maryland, United States The Johns Hopkins University Applied Physics Laboratory Full timeJob SummaryWe are seeking a highly skilled and experienced Senior Prototype Fabrication Specialist to join our Advanced Mechanical Fabrication Group at The Johns Hopkins University Applied Physics Laboratory. As a key member of our team, you will be responsible for interpreting engineering drawings and specifications to determine the correct welding sequence...