Fabrication Setup Specialist

1 week ago

Lincoln, Nebraska, United States Schneider Electric Full time
Job Summary

We are seeking a highly skilled Fabrication Setup Specialist to join our team at Schneider Electric. As a key member of our manufacturing team, you will be responsible for setting up and operating equipment to produce high-quality parts.

Key Responsibilities
  • Set up and operate equipment to specified tolerances in the stamping and molding departments.
  • Inspect parts to blueprints and secure first-piece approval before running.
  • Weigh, identify, and transport parts and materials.
  • Notify supervisor when materials, parts, tools, and equipment are not functioning properly or of the desired quality.
  • Check to ensure safety devices are in place and in proper operation.
  • Maintain and lubricate presses, dies, molds, equipment, and related tooling.
  • Obtain correct raw stock or parts from designated locations and place them into appropriate material handling equipment.
  • Load stuffers, presses, or dies with designated material.
  • Place materials, parts, tools, dies, molds, fixtures, and equipment in proper locations.
  • Makes minor electrical repairs.
  • Makes periodic quality checks following inspection procedures.
  • Segregate and dispose of scrap and offal by type of material.
  • Record information on forms for record-keeping purposes.
  • Keep equipment and work area clean and orderly.
  • May handle plant waste, both hazardous and non-hazardous, in a manner that ensures compliance with local, Nebraska Department of Environmental Quality (NDEQ), and EPA regulations.
Requirements
  • GED or High School diploma required.
  • Previous work experience preferred, but not required.
  • Must be able to pass a skills assessment test on reading and writing comprehension, math skills, and mechanical aptitude.
  • Ability to meet production requirements and maintain part quality.
  • Ability to use measuring instruments and read blueprints.
  • Ability to read, understand, and follow procedures to inspect parts.
  • Must have the ability to communicate, including verbal and written English.
  • Ability to work safely, communicate effectively with supervisors, technical support, and peers, use good judgment, and work well around others.
  • Ability to cope with stressful situations, following policies and procedures, solve problems, and maintain full commitment to the task.
  • Ability to utilize good time management skills and multitask without constant supervision.
  • Ability to use standard tools such as screwdrivers, Allen wrenches, die grinders, hammers, sockets, end wrenches, and other miscellaneous tools.
  • Ability to operate forklifts, overhead lifts, overhead hoists, and other material handling equipment and successfully pass standardized certification procedures.
  • Frequent forward and lateral reaching.
  • Ability to stand for a minimum of 8 hours.
  • Occasional moderate force required to push, pull, and position molds and dies.
  • Frequent grasping and using of tools such as wrenches and die grinders.
  • Occasional lifting of objects weighing 22-41 lbs from floor to waist height.
  • Occasional forward neck and back flexion.
  • Occasional stooping, crouching, squatting, kneeling, and balancing.
  • Frequent hand-eye coordination of body and work object movements.
  • Occasional visual positioning of equipment, adjustments, and data entry.
  • Occasional visual inspection to check for quality defects, tooling, or measuring devices.
  • Must have the ability to climb ladders up to 10 feet and work at elevated heights using step ladders and fixed ladders.
What We Offer

Schneider Electric offers an inclusive benefits package to support all of our employees, including flexible work arrangements, paid family leave, 401(k) + match, well-being programs, holidays, and paid time off, military leave benefits, and more.

We strive to promote a global economy that is both ecologically viable and highly productive.

Join our team and be part of a company that is leading the digital transformation of energy management and automation.

  • Fabrication Setup Specialist

    2 weeks ago

    Lincoln, Nebraska, United States Schneider Electric Full time

    Job SummaryWe are seeking a skilled Fabrication Setup Specialist to join our team at Schneider Electric. As a key member of our manufacturing operations, you will be responsible for setting up and operating equipment to produce high-quality parts.Key ResponsibilitiesSet up and operate equipment to specified tolerances in the stamping and molding...

  • Fabricator - 2nd Shift Specialist

    16 hours ago

    Lincoln, Nebraska, United States General Dynamics - Ordnance and Tactical Systems (AR,ME,NE,OH,VT) Full time

    Fabricator - 2nd Shift Job SummaryWe are seeking an experienced Fabricator to join our team at General Dynamics Ordnance and Tactical Systems in Lincoln, NE. As a Fabricator, you will be responsible for fabricating, assembling, and finishing various products using written instructions, drawings, and precision measuring devices.Key Responsibilities:Fabricate...

  • Fabricator - 3rd Shift Specialist

    1 week ago

    Lincoln, Nebraska, United States General Dynamics Full time

    Job SummaryWe are seeking an experienced Fabricator - 3rd Shift to join our team at General Dynamics Ordnance and Tactical Systems in Lincoln, NE. As a Fabricator - 3rd Shift, you will be responsible for fabricating, assembling, and finishing various products using written processing and/or verbal instructions, drawings, techniques, tooling, materials, and...

  • Fabricator - 3rd Shift Specialist

    2 weeks ago

    Lincoln, Nebraska, United States General Dynamics Full time

    Job SummaryGeneral Dynamics Ordnance and Tactical Systems is seeking an experienced Fabricator - 3rd Shift to join our Lincoln, NE organization. As a key member of our production team, you will be responsible for fabricating, assembling, and finishing various products using written instructions, drawings, and precision measuring devices.Key...

  • Fabricator - Alternate 12 Hour Weekend Shift A Specialist

    4 weeks ago

    Lincoln, Nebraska, United States General Dynamics Full time

    Job SummaryWe are seeking an experienced Fabricator to join our team at General Dynamics Ordnance and Tactical Systems in Lincoln, NE. The successful candidate will be responsible for fabricating, assembling, and finishing various products using written processing and verbal instructions, drawings, techniques, tooling, materials, and supplies.Key...

  • Master Fabricator Machinist

    4 days ago

    Lincoln, Nebraska, United States General Dynamics Full time

    Job Title: Master Fabricator MachinistWe are seeking an experienced Master Fabricator Machinist to join our team at General Dynamics Ordnance and Tactical Systems in Lincoln, NE.Job SummaryThe successful candidate will be responsible for setting up and operating lathes and mills for production purposes, including work assignments and tasks of comparable...

  • Master Fabricator Machinist

    2 weeks ago

    Lincoln, Nebraska, United States General Dynamics Full time

    Job Title: Master Fabricator MachinistWe are seeking an experienced Master Fabricator Machinist to join our team at General Dynamics Ordnance and Tactical Systems in Lincoln, NE.Job Summary:The successful candidate will be responsible for setting up and operating lathes and mills for production purposes, including work assignments and tasks of comparable...

  • Master Fabricator Machinist

    2 weeks ago

    Lincoln, Nebraska, United States General Dynamics Full time

    Job Title: Master Fabricator MachinistWe are seeking an experienced Master Fabricator Machinist to join our team at General Dynamics Ordnance and Tactical Systems in Lincoln, NE.Job Summary:The successful candidate will be responsible for setting up and operating lathes and mills for production purposes, including work assignments and tasks of comparable...

  • Fabricator - Alternate 12 Hour Weekend Shift A

    2 weeks ago

    Lincoln, Nebraska, United States General Dynamics Full time

    Job Title: Fabricator - Alternate 12 Hour Weekend Shift AGeneral Dynamics Ordnance and Tactical Systems is seeking an experienced Fabricator to join our Lincoln, NE organization. This role involves fabricating, assembling, and finishing various products using written instructions, drawings, and precision measuring devices.Responsibilities:Fabricate and...

  • Fabricator - Alternate 12 Hour Weekend Shift B

    4 weeks ago

    Lincoln, Nebraska, United States General Dynamics Full time

    Job SummaryWe are seeking an experienced Fabricator to join our team at General Dynamics Ordnance and Tactical Systems in Lincoln, NE. As a Fabricator, you will be responsible for fabricating, assembling, and finishing various products using written processing and verbal instructions, drawings, techniques, tooling, materials, and supplies.Key...

  • Fabricator - Alternate 12 Hour Weekend Shift B

    2 weeks ago

    Lincoln, Nebraska, United States General Dynamics Full time

    Job Title: Fabricator - Alternate 12 Hour Weekend Shift BGeneral Dynamics Ordnance and Tactical Systems is seeking an experienced Fabricator to join our Lincoln, NE organization. This position is located at our GD Lincoln West facility.Responsibilities:Fabricate, assemble, and finish varied products through the utilization of written processing and/or verbal...

  • Exhibition Fabrication Specialist

    2 weeks ago

    Lincoln, Nebraska, United States State of Nebraska Full time

    Job SummaryWe are seeking a skilled and detail-oriented Exhibits Fabrication Coordinator to join our team at the Nebraska State Historical Society. As a key member of our museum team, you will be responsible for designing and fabricating high-quality exhibit cases, displays, and exhibit furniture using wood, plastic, and metal.Key ResponsibilitiesFabricate...

  • Welder and Fabricator Specialist

    2 weeks ago

    Lincoln, Nebraska, United States Heartland Staffing Solutions Full time

    Welder and Fabricator Job DescriptionWe are seeking a skilled Welder and Fabricator to join our team at Heartland Staffing Solutions.Key Responsibilities:Read and interpret blueprints and drawings to ensure high-quality production.Select and operate the appropriate welding equipment or method according to project requirements.Prepare and finish welded parts...

  • Accounting Specialist

    3 weeks ago

    Lincoln, Nebraska, United States Apace Full time

    Job SummaryThe Accounting Specialist at Apace is responsible for managing assigned accounting tasks, supporting essential functions, and ensuring financial accuracy. This role involves the management of accounts payable, accounts receivable, fixed assets, and general accounting.Key ResponsibilitiesAccurately record vendor bills, prepare payment batches, and...

  • Client Service Specialist

    1 week ago

    Lincoln, Nebraska, United States Nelnet Full time

    Job Title: Client Service SpecialistNelnet is seeking a highly skilled Client Service Specialist to join our team. As a Client Service Specialist, you will be responsible for providing comprehensive support to Nelnet Payment Services (NPS) merchants and partners, including NBS, FACTS, and other non-education partners, throughout the implementation phase and...

  • Accounting Specialist

    2 weeks ago

    Lincoln, Nebraska, United States Region V Services Full time

    Job SummaryUnder the direct supervision of the Accounting Supervisor, the Accounting Specialist is responsible for the management of assigned accounting tasks for Region V Services.The Accounting Specialist supports one or more essential functions for the organization, including Accounts Payable, Accounts Receivable, fixed assets, and general accounting.Key...

  • Accounting Specialist

    2 weeks ago

    Lincoln, Nebraska, United States Region V Services Full time

    Job SummaryUnder the direct supervision of the Accounting Supervisor, the Accounting Specialist is responsible for the management of assigned accounting tasks for Region V Services.The Accounting Specialist supports one or more essential functions for the organization, including Accounts Payable, Accounts Receivable, fixed assets, and general accounting.Key...

  • Agricultural Equipment Specialist

    4 weeks ago

    Lincoln, Nebraska, United States Gpac Full time

    About GpacGpac is a well-established, family-owned company that has been a leader in the agriculture and manufacturing industry for nearly a century. We are committed to quality, sustainability, and fostering a supportive, family-like work environment.Job SummaryWe are seeking an experienced Agricultural Equipment Specialist to join our dynamic team. As a...

  • Commercial Fence Installation Specialist

    4 weeks ago

    Lincoln, Nebraska, United States Empire Netting and Fence Full time

    Job SummaryEmpire Netting and Fence is seeking a skilled and experienced Commercial Fence Installation Specialist to join our team. As a key member of our commercial division, you will be responsible for installing and repairing various types of commercial and industrial fences, railings, and gates.Key ResponsibilitiesInstallation and Repair: Plan, layout,...

  • Millwright Specialist

    4 weeks ago

    Lincoln, Nebraska, United States Zachry Group Full time

    Job SummaryZachry Group is seeking a skilled Millwright Specialist to join our team. As a Millwright Specialist, you will be responsible for installing, assembling, dismantling, maintaining, troubleshooting, and repairing industrial machinery to specifications.Key ResponsibilitiesInstall and assemble industrial machinery, including precision equipment,...