Drivability Development Engineer
Found in: Appcast US C2 - 6 days ago
Job Summary: Talent Software Services is in search of a Drivability Development Engineer for a contract position in Auburn Hills, MN
The opportunity will be one year with a strong chance for a long-term extension.
Primary Responsibilities/Accountabilities:
- Carrying out and analysis of tests intended for the calibration or validation of the Drivability and Engine-Gearbox Intersystem functions (characterization of the powertrain, idle speed PIV, anti-lock, PIV IS, not exhaustive).
- Engaging in development missions (hot; cold; temperate; altitude).
- Preparation and dissemination of reports.
- Acquisition data filing.
- Store the analysis results into a database.
- Analysis of the issues encountered during the development process.
- Development of precautionary, sustainable solutions, update of the repositories and carry over policy.
- Specification and coding of solutions for automatic processing of validation tests or from the data lake.
- Idle speed calibration (rpm, regulation).
- Calibration of component protection strategies.
- BVM/BVMP/BVA take-off and brio (smoke mapping, anti-droop, idle robustness).
- Engine side anti-stall pre-calibration.
- Calibration of the close control.
- Basic PWT adaptation calibration.
- Calibration of the component protection functions.
- Functional and dysfunctional validation.
- PWT functional integration.
- Follow-up of functional and inter-system validation tests and follow-up of supplier development activities.
- Calibration of BVA gear changes: stable foot, throttle release, pedal depression with different *Lock-up states in Drive and CMI.
- Calibration of torque blending functions.
- Calibration of commitments under all vehicle operating conditions.
- Calibration of gearbox self-adaptive devices.
- Torque bypass calibration.
- Calibration of temperature patches, drag reduction, turbine torque recovery functio, calibration safety.
- Calibration and validation of component protection functions.
- Validation of engine and PWT behavior (quality of torque exchange, compliance with gearbox requirements, compliance with rpm instructions, etc.) during gear shifts.
- Validation of PWT behavior in Lock-up management phases.
- Validation of intra-PWT and PWT-vehicle exchanges (flow, quality) .
- Engine software validation at each project phase.
- System calibration (converter status, ratio, gearbox learning, etc.).
- Functional and dysfunctional validation of the gearbox software.
- Calibration and validation of PWT degraded modes.
- Calibration and anti-lock validation.
- Mastering the calibration of learning (transmissibility, kisspoint, grid, synchro point, clutch actuator).
- Mastering the thermal models (clutch, hydraulics).
- Thermal models calibrations (clutch, hydraulic oil).
- Take-off Calibration.
- Clutch opening/closing calibration without gearshift
- Clutch opening/closing calibration with gearshift
- Calibration of torque blending functions.
- Calibration of hypershift mode gear shifts.
- Fine-tune calibration and anti-lock validation.
- Calibration of automatic switch thresholds.
- Warmup calibrations and verifications.
- Inter-system optimization
- Engine Torque accuracy verification.
- Fine-tune calibration and anti-lock validation
- Drivability objective evaluation.
- ADAS interactions
Qualifications:
- Bachelor's degree in mechanical or electrical engineering and IC in electrical engineering
- Proficient skills in Inca, MDA, Creta, Concerto, and Optisim work environments
Permits necessary for carrying out tests (driving, electrical, etc.) if necessary
Good knowledge of office tools (MS office pack)Knowledge of electrical concepts and multiplexing system and PID Control Systems
Valid Driver's License and engine inter-system
High level of proficiency in English (speaking, reading, writing)
If this job is a match for your background, we would be honored to receive your application
Providing consulting opportunities to TALENTed people since 1987, we offer a host of opportunities including contract, contract to hire and permanent placement
Let's talk
-
Drivability Development Engineer
Found in: Talent US C2 - 2 weeks ago
Auburn Hills, United States Lyons Consulting Group Full timeJob Description : We are looking for Mechanical and Physical Engineer- Drivability Development Engineer who will be carrying out and analysis of tests intended for the calibration or validation of the Drivability and Engine-Gearbox Intersystem functions (characterization of the powertrain, idle speed PIV, anti-lock, PIV IS, not exhaustive). Engaging in...
-
Core Engine Calibration Engineer
Found in: Appcast US C2 - 6 days ago
Auburn Hills, United States TALENT Software Services Full timeCore Engine Calibration EngineerJob Summary: Talent Software Services is in search of a Core Engine Calibration Engineer for a contract position in Auburn Hills, MIThe opportunity will be eight months with a strong chance for a long-term extension.Primary Responsibilities/Accountabilities: Calibration and Validation of Core Engine functions supporting BSG,...
-
Core Engine Calibration Engineer
Found in: Appcast US C2 - 2 weeks ago
Auburn Hills, United States TALENT Software Services Full timeCore Engine Calibration EngineerJob Summary: Talent Software Services is in search of a Core Engine Calibration Engineer for a contract position in Auburn Hills, MIThe opportunity will be eight months with a strong chance for a long-term extension.Primary Responsibilities/Accountabilities: Calibration and Validation of Core Engine functions supporting BSG,...
-
Software Development Engineer
Found in: beBee S US - 6 days ago
Auburn Hills, United States Shape Process Automation Full timeSHAPE is a strategic ecosystem of companies including Flow International, Dynamic Robotic Solutions (DRS), KMT Waterjet, H20 Jet, AquaDyne, Advanced Pressure Systems (APS), Tech-Con Automation, Aquarese, Projet System and TOPS. Collectively, we provide an extensive portfolio of manufacturing process solutions to customers around the world.The core technology...
-
Software Development Engineer
Found in: beBee jobs US - 2 weeks ago
Auburn Hills, Michigan, United States Shape Process Automation Full timeSHAPE is a strategic ecosystem of companies including Flow International, Dynamic Robotic Solutions (DRS), KMT Waterjet, H20 Jet, AquaDyne, Advanced Pressure Systems (APS), Tech-Con Automation, Aquarese, Projet System and TOPS. Collectively, we provide an extensive portfolio of manufacturing process solutions to customers around the world.The core technology...
-
Product Development Engineering
Found in: Appcast US C2 - 2 weeks ago
Auburn Hills, United States Tata Technologies Full timeBasic Qualifications:Bachelor of Science degree in Mechanical or Electrical Engineering or equivalent from an ABET accredited or equivalent programFive + years of vehicle engineering experience in one or more of the following areas: Body-in-White, Electrical, Interior Systems, Powertrain Adaptations, Engine Systems (Cooling, Fuel, Exhaust), or Chassis...
-
Product Development Engineering
Found in: Appcast Linkedin GBL C2 - 2 weeks ago
Auburn Hills, United States Tata Technologies Full timeBasic Qualifications:Bachelor of Science degree in Mechanical or Electrical Engineering or equivalent from an ABET accredited or equivalent programFive + years of vehicle engineering experience in one or more of the following areas: Body-in-White, Electrical, Interior Systems, Powertrain Adaptations, Engine Systems (Cooling, Fuel, Exhaust), or Chassis...
-
Product Development Engineering
2 weeks ago
Auburn Hills, United States Tata Technologies Full timeBasic Qualifications:Bachelor of Science degree in Mechanical or Electrical Engineering or equivalent from an ABET accredited or equivalent programFive + years of vehicle engineering experience in one or more of the following areas: Body-in-White, Electrical, Interior Systems, Powertrain Adaptations, Engine Systems (Cooling, Fuel, Exhaust), or Chassis...
-
Business Development Manager
5 days ago
Auburn Hills, United States Flex Workforce Solutions Full timeJob DescriptionJob DescriptionBusiness Development Manager – Vehicle EngineeringWe are seeking a Business Development Manager to expand our capabilities in vehicle engineering. This role focuses on fostering relationships with OEMs and Tier 1 customers, enhancing our presence in the automotive industry. Candidates with a passion for vehicle attribute...
-
Auburn Hills, United States CareerBuilder Full timeFEV is a global engineering consultancy providing services within the complete mobility space, including the passenger car and heavy-duty commercial industry. If you are interested in joining a team of experienced engineers developing advanced powertrain systems, that leverage both conventional combustion engines and electrification to address future...
-
Auburn Hills, United States CareerBuilder Full timeOverview: Celanese is a Fortune 500 global chemical and specialty materials company that engineers and manufactures products essential to everyday living. With global headquarters in Dallas, Texas, Celanese employs approximately 13,300 dedicated people working at more than 50 owned and operated manufacturing facilities across 27 countries. We are committed...
-
Project Manager Development
5 days ago
Auburn Hills, United States Rheinmetall Full timeProject Manager Development at Auburn Hills, MI for Pierburg US, LLC POSITION SUMMARY Also known as a Product Development Engineer, this position will be responsible for developing products for production based on customer specifications, functional requirements, engine packaging and manufacturability. This position is leading all development activities...
-
Project Manager Development
6 days ago
Auburn Hills, United States Rheinmetall Full timeProject Manager Development at Auburn Hills, MI for Pierburg US, LLC POSITION SUMMARY Also known as a Product Development Engineer, this position will be responsible for developing products for production based on customer specifications, functional requirements, engine packaging and manufacturability. This position is leading all development activities...
-
Mechanical Engineer
6 days ago
Auburn Hills, United States Sanhua International Full timeSanhua's Automotive Business Unit is looking for a Mechanical Engineer to join our team in our Auburn Hills, Michigan office. This person will be the primary technical interface to OEM and tier customers on thermal management-related products and programs, especially automotive heat exchangers, including battery chiller, cooling plate, oil cooler, and gas...
-
Product Development Engineering
6 days ago
Auburn, United States Tata Technologies Full timeBasic Qualifications: Bachelor of Science degree in Mechanical or Electrical Engineering or equivalent from an ABET accredited or equivalent program Five + years of vehicle engineering experience in one or more of the following areas: Body-in-White, Electrical, Interior Systems, Powertrain Adaptations, Engine Systems (Cooling, Fuel, Exhaust), or Chassis...
-
Control Engineer
7 days ago
Auburn Hills, United States PDSSOFT Full timeControl Engineer Location: Auburn Hills, MI (On-site) Duration: 12 Months Job Description: As needed to work on Complex Systems, it is essential the successful candidate can show a proven record of working on his/her initiative and within a team delivering high-quality and robust technical solutions Bachelor/Master of Science in Mechanical Engineering or...
-
Control Engineer
3 days ago
Auburn Hills, United States PDSSOFT Full timeControl Engineer Location: Auburn Hills, MI (On-site) Duration: 12 Months Job Description: As needed to work on Complex Systems, it is essential the successful candidate can show a proven record of working on his/her initiative and within a team delivering high-quality and robust technical solutions Bachelor/Master of Science in Mechanical Engineering or...
-
Control Engineer
Found in: Appcast Linkedin GBL C2 - 2 weeks ago
Auburn Hills, United States PDSSOFT INC. Full timeControl EngineerLocation: Auburn Hills, MI (On-site)Duration: 12 MonthsJob Description: As needed to work on Complex Systems, it is essential the successful candidate can show a proven record of working on his/her initiative and within a team delivering high-quality and robust technical solutionsBachelor/Master of Science in Mechanical Engineering or...
-
Control Engineer
1 week ago
Auburn Hills, United States PDSSOFT INC. Full timeControl EngineerLocation: Auburn Hills, MI (On-site)Duration: 12 MonthsJob Description: As needed to work on Complex Systems, it is essential the successful candidate can show a proven record of working on his/her initiative and within a team delivering high-quality and robust technical solutionsBachelor/Master of Science in Mechanical Engineering or...
-
ADAS/AUTOSAR/C++ Developer
Found in: Talent US C2 - 6 days ago
Auburn Hills, United States L&T Technology Services Full timeEngineer should have experience SOC experience (TDA4 or any other SOC with MCU ) with ADAS with AUTOSAR domain experience embedded experience in SW development including requirements, Design and Implementation with embedded C/C++ programming Working knowledge of CAN and LIN based tools such as CANalyxer, CANoe, CANape, neoVI Use of AUTOSAR based tools...