Drivability Development Engineer

Found in: Talent US C2 - 2 weeks ago

Auburn Hills, United States Lyons Consulting Group Full time

Job Description

:

We are looking for Mechanical and Physical Engineer- Drivability Development Engineer who will be carrying out and analysis of tests intended for the calibration or validation of the Drivability and Engine-Gearbox Intersystem functions (characterization of the powertrain, idle speed PIV, anti-lock, PIV IS, not exhaustive). Engaging in development missions (hot; cold; temperate; altitude) and is proficient in preparation and dissemination of reports, Acquisition data filing and store the analysis results into a database and examination of the issues encountered during the development process.

Key Responsibilities:

Expert in development of precautionary, balanced solutions, update of the repositories and carry over policy. Specification and coding of solutions for automatic processing of validation tests or from the data lake. Idle speed calibration (rpm, regulation) Calibration of component protection strategies and functions. BVM/BVMP/BVA take-off and brio (smoke mapping, anti-droop, idle adaptability) Proficient in System Validation, Engine side anti-stall pre-calibration, Calibration of the close control and Basic PWT adaptation and System calibration and PWT functional integration Follow-up of functional and inter-system validation tests and follow-up of supplier development activities Proficiency in Calibration of BVA gear changes: stable foot, throttle release, pedal depression with different *Lock-up states in Drive and CMI, Calibration of commitments under all vehicle operating conditions, Calibration of gearbox self-adaptive devices, Torque bypass calibration. Anti-overspeed calibration and Calibration of temperature patches, drag reduction, turbine torque recovery function, calibration safety. Validation of engine and PWT behaviour (quality of torque exchange, compliance with gearbox requirements, compliance with rpm instructions, etc.) during gear shifts Validation of intra-PWT and PWT-vehicle exchanges (flow, quality) and Engine software validation at each project phase System calibration (converter status, ratio, gearbox learning, etc.), Calibration and validation of PWT degraded modes and behaviour in Lock-up management phases and become proficient in the calibration of learning (transmissibility, kiss point, grid, synchro point, clutch actuator) and the thermal models (clutch, hydraulics) Proficient in Thermal models’ calibrations (clutch, hydraulic oil) and Take-off Calibration, Clutch opening/closing calibration without and with gearshift and of torque blending functions, Calibration of hyper shift mode gear shifts and of automatic switch thresholds, Warm up calibrations and verifications, Inter-system optimization, Engine Torque accuracy verification and Fine-tune calibration and anti-lock validation, Drivability objective evaluation, ADAS interactions.

Required Skills:

Bachelor’s degree in mechanical or electrical engineering and IC in electrical engineering Proficient skills in Inca, MDA, Creta, Concerto, Optisim work environments Permits necessary for carrying out tests (driving, electrical, etc.) if necessary. Good knowledge of office tools (MS office pack) along with knowledge of electrical concepts and multiplexing system and PID Control Systems Valid Driver's License and engine inter-system

Job

:Programmer/Analyst

Schedule

:Full-time

Primary Location

:US-MI-Auburn Hills

Organization

:ERD PPL US

  • Drivability Development Engineer

    Found in: Appcast US C2 - 6 days ago

    Auburn Hills, United States TALENT Software Services Full time

    Drivability Development EngineerJob Summary: Talent Software Services is in search of a Drivability Development Engineer for a contract position in Auburn Hills, MNThe opportunity will be one year with a strong chance for a long-term extension.Primary Responsibilities/Accountabilities: Carrying out and analysis of tests intended for the calibration or...

  • Core Engine Calibration Engineer

    Found in: Appcast US C2 - 2 weeks ago

    Auburn Hills, United States TALENT Software Services Full time

    Core Engine Calibration EngineerJob Summary: Talent Software Services is in search of a Core Engine Calibration Engineer for a contract position in Auburn Hills, MIThe opportunity will be eight months with a strong chance for a long-term extension.Primary Responsibilities/Accountabilities: Calibration and Validation of Core Engine functions supporting BSG,...

  • Core Engine Calibration Engineer

    Found in: Appcast US C2 - 6 days ago

    Auburn Hills, United States TALENT Software Services Full time

    Core Engine Calibration EngineerJob Summary: Talent Software Services is in search of a Core Engine Calibration Engineer for a contract position in Auburn Hills, MIThe opportunity will be eight months with a strong chance for a long-term extension.Primary Responsibilities/Accountabilities: Calibration and Validation of Core Engine functions supporting BSG,...

  • Software Development Engineer

    Found in: beBee S US - 6 days ago

    Auburn Hills, United States Shape Process Automation Full time

    SHAPE is a strategic ecosystem of companies including Flow International, Dynamic Robotic Solutions (DRS), KMT Waterjet, H20 Jet, AquaDyne, Advanced Pressure Systems (APS), Tech-Con Automation, Aquarese, Projet System and TOPS. Collectively, we provide an extensive portfolio of manufacturing process solutions to customers around the world.The core technology...

  • Software Development Engineer

    Found in: beBee jobs US - 2 weeks ago

    Auburn Hills, Michigan, United States Shape Process Automation Full time

    SHAPE is a strategic ecosystem of companies including Flow International, Dynamic Robotic Solutions (DRS), KMT Waterjet, H20 Jet, AquaDyne, Advanced Pressure Systems (APS), Tech-Con Automation, Aquarese, Projet System and TOPS. Collectively, we provide an extensive portfolio of manufacturing process solutions to customers around the world.The core technology...

  • Product Development Engineering

    Found in: Appcast US C2 - 2 weeks ago

    Auburn Hills, United States Tata Technologies Full time

    Basic Qualifications:Bachelor of Science degree in Mechanical or Electrical Engineering or equivalent from an ABET accredited or equivalent programFive + years of vehicle engineering experience in one or more of the following areas: Body-in-White, Electrical, Interior Systems, Powertrain Adaptations, Engine Systems (Cooling, Fuel, Exhaust), or Chassis...

  • Product Development Engineering

    2 weeks ago

    Auburn Hills, United States Tata Technologies Full time

    Basic Qualifications:Bachelor of Science degree in Mechanical or Electrical Engineering or equivalent from an ABET accredited or equivalent programFive + years of vehicle engineering experience in one or more of the following areas: Body-in-White, Electrical, Interior Systems, Powertrain Adaptations, Engine Systems (Cooling, Fuel, Exhaust), or Chassis...

  • Product Development Engineering

    Found in: Appcast Linkedin GBL C2 - 2 weeks ago

    Auburn Hills, United States Tata Technologies Full time

    Basic Qualifications:Bachelor of Science degree in Mechanical or Electrical Engineering or equivalent from an ABET accredited or equivalent programFive + years of vehicle engineering experience in one or more of the following areas: Body-in-White, Electrical, Interior Systems, Powertrain Adaptations, Engine Systems (Cooling, Fuel, Exhaust), or Chassis...

  • Business Development Manager

    5 days ago

    Auburn Hills, United States Flex Workforce Solutions Full time

    Job DescriptionJob DescriptionBusiness Development Manager – Vehicle EngineeringWe are seeking a Business Development Manager to expand our capabilities in vehicle engineering. This role focuses on fostering relationships with OEMs and Tier 1 customers, enhancing our presence in the automotive industry. Candidates with a passion for vehicle attribute...

  • Senior Project Engineer, Engine and Hybrid Powertrain Development

    5 days ago

    Auburn Hills, United States CareerBuilder Full time

    FEV is a global engineering consultancy providing services within the complete mobility space, including the passenger car and heavy-duty commercial industry. If you are interested in joining a team of experienced engineers developing advanced powertrain systems, that leverage both conventional combustion engines and electrification to address future...

  • Business Development Engineer-Industrial, Medical, Consumer

    4 days ago

    Auburn Hills, United States CareerBuilder Full time

    Overview: Celanese is a Fortune 500 global chemical and specialty materials company that engineers and manufactures products essential to everyday living. With global headquarters in Dallas, Texas, Celanese employs approximately 13,300 dedicated people working at more than 50 owned and operated manufacturing facilities across 27 countries. We are committed...

  • Project Manager Development

    4 days ago

    Auburn Hills, United States Rheinmetall Full time

    Project Manager Development at Auburn Hills, MI for Pierburg US, LLC POSITION SUMMARY Also known as a Product Development Engineer, this position will be responsible for developing products for production based on customer specifications, functional requirements, engine packaging and manufacturability. This position is leading all development activities...

  • Project Manager Development

    5 days ago

    Auburn Hills, United States Rheinmetall Full time

    Project Manager Development at Auburn Hills, MI for Pierburg US, LLC POSITION SUMMARY Also known as a Product Development Engineer, this position will be responsible for developing products for production based on customer specifications, functional requirements, engine packaging and manufacturability. This position is leading all development activities...

  • Mechanical Engineer

    6 days ago

    Auburn Hills, United States Sanhua International Full time

    Sanhua's Automotive Business Unit is looking for a Mechanical Engineer to join our team in our Auburn Hills, Michigan office. This person will be the primary technical interface to OEM and tier customers on thermal management-related products and programs, especially automotive heat exchangers, including battery chiller, cooling plate, oil cooler, and gas...

  • Product Development Engineering

    6 days ago

    Auburn, United States Tata Technologies Full time

    Basic Qualifications: Bachelor of Science degree in Mechanical or Electrical Engineering or equivalent from an ABET accredited or equivalent program Five + years of vehicle engineering experience in one or more of the following areas: Body-in-White, Electrical, Interior Systems, Powertrain Adaptations, Engine Systems (Cooling, Fuel, Exhaust), or Chassis...

  • Control Engineer

    3 days ago

    Auburn Hills, United States PDSSOFT Full time

    Control Engineer Location: Auburn Hills, MI (On-site) Duration: 12 Months Job Description: As needed to work on Complex Systems, it is essential the successful candidate can show a proven record of working on his/her initiative and within a team delivering high-quality and robust technical solutions Bachelor/Master of Science in Mechanical Engineering or...

  • Control Engineer

    7 days ago

    Auburn Hills, United States PDSSOFT Full time

    Control Engineer Location: Auburn Hills, MI (On-site) Duration: 12 Months Job Description: As needed to work on Complex Systems, it is essential the successful candidate can show a proven record of working on his/her initiative and within a team delivering high-quality and robust technical solutions Bachelor/Master of Science in Mechanical Engineering or...

  • Control Engineer

    1 week ago

    Auburn Hills, United States PDSSOFT INC. Full time

    Control EngineerLocation: Auburn Hills, MI (On-site)Duration: 12 MonthsJob Description: As needed to work on Complex Systems, it is essential the successful candidate can show a proven record of working on his/her initiative and within a team delivering high-quality and robust technical solutionsBachelor/Master of Science in Mechanical Engineering or...

  • Control Engineer

    Found in: Appcast Linkedin GBL C2 - 2 weeks ago

    Auburn Hills, United States PDSSOFT INC. Full time

    Control EngineerLocation: Auburn Hills, MI (On-site)Duration: 12 MonthsJob Description: As needed to work on Complex Systems, it is essential the successful candidate can show a proven record of working on his/her initiative and within a team delivering high-quality and robust technical solutionsBachelor/Master of Science in Mechanical Engineering or...

  • ADAS/AUTOSAR/C++ Developer

    Found in: Talent US C2 - 6 days ago

    Auburn Hills, United States L&T Technology Services Full time

    Engineer should have experience SOC experience (TDA4 or any other SOC with MCU ) with ADAS with AUTOSAR domain experience embedded experience in SW development including requirements, Design and Implementation with embedded C/C++ programming Working knowledge of CAN and LIN based tools such as CANalyxer, CANoe, CANape, neoVI Use of AUTOSAR based tools...