Avionics Data Handling Subsystem Engineer

2 weeks ago


Lansing, United States CareerBuilder Full time

OHB Italia is seeking for its Satellite and Missions Department in Rome or Milano an

Avionics Data Handling Subsystem Engineer (M/F) REF.Avio DHS_2024

As an Avionics Data Handling Subsystem (DHS) Engineer within the Avionics Team, you will be responsible for all aspects of hardware electronics and hardware software interactions, from high-level requirements collection to detail design of the different subsystems and avionics components, passing through all the phases of the procurement of avionic items, providing also support on assembly, testing and integration of units within the platform.

Responsibilities:

Analyse and trace high-level avionics subsystem requirements to electrical and electronic specifications at unit and board levels

Requirements flow down from system or satellite specification down to subsystem and units

Manage and maintain avionics components requirements

Definition and maintenance of the DHS documentation data package throughout all the lifecycle of the satellite mission from phase A to E

Achievement of all the subsystem and units relevant review internally and with the customer on time and cost

Complete knowledge of the DHS and all of its interactions with software and other platform and payload items.

DHS Test supervision for AIV requirements closure

Satellite Database consistency maintenance

Tasks:

Participate and collaborate concurrently to consolidate the architecture definition of On-Board Data Handling subsystems (OBDH)

Concurrent engineering aimed to the definition and maintenance of the Software Subsystem Specification (SSS)

DHS Test specification definition and Test procedures AIT support

Perform technical trade-off analyses (Interfaces, budgets, architectures, schemes, topologies, etc.) to make technical decisions

Conduct avionics hardware and DHS analyses to feed design-validation loops (single-point failure, FMEA, reliability, hazard analysis, thermal, radiation, NCRs, RFDs, RFWs etc.)

Perform circuit functional checks, debugging, troubleshooting and confidence testing

Coordinate with a multidisciplinary team (software, firmware, mechanical, AIT, harness, production) to fulfil the quality, cost and programmatic objectives

Drive improvements and perform investigations and trade studies to push avionics hardware design to new boundaries in terms of reliability, capabilities, mass and cost savings.

Generate and release on schedule engineering documentation such as technical notes, test reports, electrical interface control document (EICD)

Document and communicate the design and analysis results thoroughly and clearly via design reviews

Ability to produce presentation for customer reviews

Support to the production of Satellite User Manual and Space To Ground ICD

Collaborate actively with the Procurement Team to support all the activities related to DHS items new developments, manufacturing and procurement. Support vendor selection, manufacturing monitoring and procurement of items and EGSEs and consumables according to applicable product assurance and regulatory standards

Collaborate actively as focal point of avionics platform design with the AIT team to support the qualification and acceptance test campaigns (functional and environment tests);

Provide interface support with the AIT and Production team to ensure compliance with the final design and feasibility to fulfil schedule goals.

Qualifications:

S. degree or higher in Electronic engineering or an appropriate engineering field;

2+ years of experience working in related positions

2+ years background in electronics hardware design in at least one of these areas:

Power electronics: DC-DC converters and topologies, battery management circuitry, EMI filtering, LCL interfaces, protection circuitry, load switches, optocoupled control interfaces, etc.

Digital electronics: communication interfaces (SPI, I2C, UART, MIL-STD-1553, CAN, PCIe, Ethernet, RS-422, RS-485), memories, clocks, logic circuits, design for SoCs, microcontrollers, and microprocessors

Experience with requirements management, tracing high-level requirements to hardware electronics design solutions

Experience working in formal engineering processes (requirements capture, documentation, design reviews, design verification, etc.)

Understanding of electronic circuits and physical principles that drive the design of avionics hardware such as EMC, ESD, thermal, vibration, outgassing, SEE, etc.

Strong teamwork and communication skills with a demonstrated ability to interact with other disciplines

Proven ability to work in a transversal and multitasking environment

Excellent attention to detail.

Nice to have Qualifications:

Experience with design of electronics for hard environments (radiation, thermal, vacuum, vibration, shock)

Experience with aerospace industry standards (ECSS)

Experience in Model Based Engineering concept and applications

Fast adaptability to rapid changes environments;

Team player able to work different tasks in parallel.

#J-18808-Ljbffr



  • Lansing, United States MHM Publishing Inc Full time

    Minimum of 8 years relevant experience in the rotorcraft industryAn advanced understanding of general aviation avionics, and rotorcraft or general aircraft systems.A basic or advanced understanding of FAA rules, regulations, and certification processes.CAD skills required.Basic or advanced computer skills (MS Word, Excel, and PowerPoint at a minimum).Basic...

  • Automation Engineer

    1 week ago


    Lansing, United States Morrison Container Handling Solutions Full time

    Job Description Job Description Morrison Container Handling Solutions, the leading container handling expert in the packaging industry, is seeking an Automation Engineer to bring their expertise to our growing team of talent and growing organization. Applicants who love to figure out how to make complex things work simply and efficiently, and are interested...

  • Automation Engineer

    1 week ago


    Lansing, United States Morrison Container Handling Solutions Full time

    Job DescriptionJob DescriptionMorrison Container Handling Solutions, the leading container handling expert in the packaging industry, is seeking an Automation Engineer to bring their expertise to our growing team of talent and growing organization. Applicants who love to figure out how to make complex things work simply and efficiently, and are interested in...

  • Manufacturing Engineer

    12 hours ago


    Lansing, United States Optimal CAE Full time

    Position Description: Vehicle Operations - Manufacturing Engineering working within the Electrical Quality group. Focusing on current model quality, new programs and future development. Position will have high visibility with management due to the company's key focus on quality. Working with North American assembly plants to improve internal and external...


  • Lansing, United States Abacus Full time

    Senior Mechanical Engineer Direct Hire Job Summary: As a Senior Mechanical Engineer, you will be responsible for the analysis, design, build, and enhancement of the mechanical systems associated with our nanosatellite communications payloads, satellites, testbeds, testing equipment, etc. Some work products will include mechanical models of space and ground...


  • Lansing, United States OHB Italia SpA Full time

    OHB Italia is seeking for its Satellite and Missions Department in Rome or Milano an RF Communication and TT&C Engineer (M/F) REF.Avio RF_2024 As an RF Communication and TT&C Engineer, you will be responsible for all aspects of the RF communication and TT&C Subsystem design and follow-up until the production phase, and in-orbit commissioning....

  • Data Engineer

    6 days ago


    Lansing, United States Associazione Italiana per la Ricerca sul Cancro (AIRC) Full time

    Area Servizi Generali e IT: Data EngineerArea Servizi Generali e IT: Data Engineer Fondazione AIRC per la ricerca sul cancro ETS e uno dei piu grandi enti non-profit in Italia. Dall'anno della sua fondazione, nel 1965, AIRC si e sempre impegnata a promuovere la ricerca oncologica nel nostro Paese tramite la raccolta e lerogazione di fondi e la diffusione...

  • System Engineer

    8 hours ago


    Lansing, United States Insight Global Full time

    Position: Systems Engineer Location: Sterling Heights, MI Duration: 9-month contract-to-hire Must Haves: Bachelors of Science in Mechanical, Electrical, Systems, Aerospace Engineering 3-5 years experience in systems engineering on DoD programs Experience in Requirements development Experience using SysML and Cameo for system modeling Plusses Currently holds...


  • Lansing, United States Avature Full time

    The Senior Data Engineer will be a part of the Enterprise Data & Analytics team. The individual will be a part of the engineering team that develops data pipelines & objects in the warehouse. The cloud based warehouse is expected to contains the data, historical & transactional, for several up-stream applications that support a specific line of business...

  • data engineer

    6 days ago


    Lansing, United States Sincrono Consulenza Srl Full time

    Gruppo Sincrono, Holding Company ICT di Consulenza e Formazione che opera sul mercato dal 1993, sta selezionando per un’importante opportunità professionale per un nostro Cliente con grande valenza territoriale, un Data Engineer, l’attività sarà svolta in sede, *il candidato verrà inserito in progetti all’avanguardia e innovativi. Inglese : Livello...


  • Lansing, United States TH Daniels Full time

    Overview: Seeking a Senior Facilities Engineer specializing in manufacturing operations. This role involves managing capital projects and optimizing plant utility systems across multiple North American sites. Key Responsibilities: Ensure incorporation of safety and environmental requirements into project scopes and budgets. Conduct infrastructure and utility...


  • Lansing, United States CareerBuilder Full time

    Overview: Seeking a Senior Facilities Engineer specializing in manufacturing operations. This role involves managing capital projects and optimizing plant utility systems across multiple North American sites. Key Responsibilities: Ensure incorporation of safety and environmental requirements into project scopes and budgets. Conduct infrastructure and utility...


  • Lansing, United States Diverse Lynx Full time

    Job Title: Validation Engineer Location: Auburn Hills, Michigan. 100% Onsite. What you ll be doing: The Validation Engineer is responsible to lead electrical feature testing for specific vehicle programs and should be capable of working with suppliers, various Engineering Support teams including systems, wiring, design release engineers, Program Management,...


  • Lansing, United States Hyster-Yale Material Handling, Inc. Full time

    Job Title Product Service Engineer I Job Description Gruppo Multinazionale, leader mondiale nella progettazione e costruzione dei carrelli elevatori per la movimentazione merci, ricerca per la propria sede italiana di Masate (MI): Product Service Engineer Descrizione della posizione : Il candidato verrà inserito nel team del Customer Support e, dopo...


  • Lansing, United States Lucid Group inc. Full time

    We are currently seeking a Manager, Seating Systems. This position requires an experienced professional with a responsibility for managing the design and development of the seating systems of a world-class vehicle in terms of both styling and function. Our ideal candidate exhibits a can-do attitude and approaches his or her work with vigor and determination....

  • Project Engineer

    4 days ago


    Lansing, United States KODE Labs Full time

    Detroit, Michigan, United States | Posted on 04/18/2024Were looking for a full-time Project Engineer to join our office in Detroit , who is enthusiastic about building engineering and will play a critical role in onboarding buildings into our smart building platform. Our mission is to give our clients the best experience possible, every day. To do that, we...

  • Project Engineer

    6 days ago


    Lansing, United States KODE Labs Full time

    Detroit, Michigan, United States | Posted on 04/18/2024 We’re looking for a full-time Project Engineer to join our office in Detroit , who is enthusiastic about building engineering and will play a critical role in onboarding buildings into our smart building platform. Our mission is to give our clients the best experience possible, every day. To do that,...

  • Data Entry Clerk

    19 hours ago


    Lansing, United States Pete's Collision Center Full time

    Pete's Collision Center - We are currently seeking detail-oriented and efficient Data Entry Clerk to join our dynamic team. The ideal candidate should have excellent typing skills, be comfortable working with numbers, and possess strong organizational skills. The Data Entry Clerk will be responsible for inputting and updating various data into computer...


  • Lansing, United States Rigaku Americas Full time

    Optical Metrology Engineer (Auburn Hills, MI) January 24, 2024 Level: Experienced Travel Percentage: None Job Location: Rigaku Innovative Technologies Inc - Auburn Hills, MI Job Shift: Day Position Type: Full Time Job Category: Engineering Description Rigaku Innovative Technologies (RIT), a subsidiary of Rigaku Corporation, is currently looking for an...

  • RECRUITING DAY Eni

    2 weeks ago


    Lansing, United States CareerBuilder Full time

    RECRUITING DAY Eni - DATA SCIENTIST ACADEMY Pre-screening: yes, candidates will be contacted only if they are deemed in line with requirements The company will do a prescreening of the applications after the indicated deadline. The candidates considered in line with requirements will be contacted by the company to organize an interview with company...