SMTS Analog Design Engineering

2 months ago

Agoura Hills, United States Rambus Full time

Overview:

Rambus, a premier chip and silicon IP provider, is seeking to hire an exceptional?Analog Design Engineer?to join our Bufferchip Design team in Agoura Hills, California. Candidates will be joining some of the brightest inventors and engineers in the world to develop products that make data faster and safer.

As a?Analog Design Engineer, the candidate will be reporting to the Sr. Director Engineering?and is a Full-Time position. Successful applicant will have highly visible role in product definition/design across Rambus sites.

Rambus offers a flexible work environment, embracing a hybrid approach for the majority of our office-based roles. We encourage employees to spend an average of at least three days per week working onsite, allowing for two days of remote work.

Responsibilities:
  • Ownership of Analog designs at chip and/or block level
  • Define optimal architectures to achieve competitive product specifications
  • Design, simulate and characterize high-performance and high-speed circuits (e.g. Transmitter, Receiver, ADC, DAC, LDO, PLL, DLL, PI circuits).
  • Create high level model for design tradeoff analysis and behavior model for verification simulations
  • Create floorplan and work with layout team to demonstrate post extraction performance
  • Document analysis and simulation to show that design achieves critical electrical, timing parameters and pre-silicon verification flow
  • Work with the Lab/System team for test plan, silicon bring up and characterization
  • Understand and disseminate applicable standards and its relevance in a given project to the team
  • Mentor junior designers
Qualifications:
  • MS EE and 5+ years or PhD EE and 2+ years experience of CMOS analog circuit design. Position may be tailored appropriately with different level of experience.
  • Prior experience in at least one of the following circuits: Transmitter, Receiver (with CTLE, DFE), PLL, DLL, PI, clock distribution
  • Good knowledge of design principles for practical design tradeoffs
  • Fundamental knowledge of basic building blocks like bias, op-amp and LDO
  • Experience in designing memory interfaces such as DDR 4/5 or serial links such as PCIE is highly desirable
  • Prior design experience in FinFET process and digitally assisted design is desirable
  • Experience in modeling with matlab, Verilog-A, verilog is desirable
  • Experience working in leading R&D and future technology development projects is desirable
  • The position requires good written & verbal communication skills as well a strong commitment and ability to work in cross functional and globally dispersed teams
    ?

About Rambus

Rambus is a global company that makes industry-leading memory interface chips and Silicon IP to advance data center connectivity and solve the bottleneck between memory and processing. With over 30 years of semiconductor experience, we are a leading provider of high-performance products and innovations that maximize the bandwidth, capacity and security for AI and other data-intensive workloads. Our world-class team is the foundation of our company, and our innovative spirit drives us to develop the cutting-edge products and technologies essential for tomorrows systems.

Rambus offers a competitive compensation package including base salary, bonus, equity, matching 401(k), employee stock purchase plan, comprehensive medical and dental benefits, time-off program and gym membership.

The US salary range for this full-time position is $130,400 to $242,200. Our salary ranges are determined by role, level and location. The successful candidates starting pay will be determined based on job-related skills, experience, qualifications, work location and market conditions.

Rambus is committed to cultivating a culture where we actively seek to understand, respect, and celebrate the complex and rich identities of ourselves and others. Our Diversity, Equity, and Inclusion initiatives are geared towards valuing the differences in backgrounds, experiences, and thoughts at Rambus to help enhance collaboration, teamwork, engagement, and innovation. At Rambus, we believe that we can be our best when every member of our organization feels respected, included, and heard.

Rambus is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, genetic information, or other applicable legally protected characteristics.

Rambus is committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans during our job application procedures. If you require assistance or an accommodation due to a disability, please feel free to inform us in your application.

Rambus does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services.

For more information about Rambus, visit rambus.com. For additional information on life at Rambus and our current openings, check out rambus.com/careers/.

#LI-BD1

  • Field Services Engineer

    2 months ago

    Vernon Hills, United States Sterling Engineering Full time

    Title: Field Service EngineerLocation: Vernon Hills, ILHire Type: Direct HireTravel: 75% (domestic and international)Salary: $70k-$75k/yr. plus OTSterling Engineering is looking for a Field Service Engineer for a company located in Vernon Hills, IL that specializes in the designing and manufacturing and sale of Surface Mount Technology (SMT) equipment. This...

  • Field Services Engineer

    2 months ago

    Vernon Hills, United States Sterling Engineering Full time

    Title: Field Service EngineerLocation: Vernon Hills, ILHire Type: Direct HireTravel: 75% (domestic and international)Salary: $70k-$75k/yr. plus OTSterling Engineering is looking for a Field Service Engineer for a company located in Vernon Hills, IL that specializes in the designing and manufacturing and sale of Surface Mount Technology (SMT) equipment. This...

  • Field Service Engineer

    2 months ago

    Vernon Hills, United States Sterling Engineering Inc. Full time

    Job DescriptionJob DescriptionTitle: Field Service EngineerLocation: Vernon Hills, ILHire Type: Direct HireTravel: 75%Salary: $70k-$75k/yr. plus OTSterling Engineering is looking for a Field Service Engineer for a company located in Vernon Hills, IL that specializes in the designing and manufacturing and sale of Surface Mount Technology (SMT) equipment. This...

  • Avionics Hardware Engineer

    6 days ago

    Woodland Hills, California, United States Blue Origin Full time

    Job SummaryBlue Origin is seeking a highly skilled Avionics Hardware Engineer to join our team. As a key member of our spacecraft electrical design team, you will be responsible for developing, leading, and owning digital, analog, and mixed-signal circuit avionic designs that interact with avionics systems.Key ResponsibilitiesDevelop and lead avionic...

  • Hardware Design Engineer

    2 months ago

    Laguna Hills, United States Actalent Full time

    (RF) Hardware Design Engineer Job Description We are on the hunt for an experienced RF Hardware Engineer with a knack for developing printed circuit boards for highly integrated monolithic and multi-chip solutions. This role will revolve around developing RF. The successful candidate will play a key role in the development of groundbreaking ultra-high speed...

  • Senior Hardware Design Engineer

    2 months ago

    Farmington Hills, United States Hitachi Astemo Full time

    Job Title: Lead Engineer, Electronics Engineering Development DepartmentSummary: Under the direction of Chief Engineer this position exercises responsibility for designing , implementing and optimizing advanced Electronics structure.Essential Functions: Develop development masterplan aligned with the company's corporate business objectives.Perform...

  • Senior Hardware Design Engineer

    3 months ago

    Farmington Hills, United States Hitachi Astemo Full time

    Job Title: Lead Engineer, Electronics Engineering Development DepartmentSummary: Under the direction of Chief Engineer this position exercises responsibility for designing , implementing and optimizing advanced Electronics structure.Essential Functions: Develop development masterplan aligned with the company's corporate business objectives.Perform...

  • Refurbishing Tech

    1 week ago

    Vernon Hills, United States Sterling Engineering Inc. Full time

    Job DescriptionJob DescriptionTitle: Refurbishing TechnicianLocation: Vernon Hills, ILHire Type: Direct HireSalary: $50k-53k/yr.Sterling Engineering is looking for a refurbishing technician for a company located in Vernon Hills, IL that specializes in the designing and manufacturing of Surface Mount Technology (SMT) equipment. This is a great opportunity to...

  • Controls Project Engineer

    3 months ago

    Auburn Hills, United States Onward Technologies Inc. Full time

    Controls Project Engineer Location: Auburn Hills, Michigan Outstanding opportunity to work as a Controls Project Engineer for a very successful company in Auburn Hills. If you have experience working as a Controls Project Engineer or a Controls Engineer or as an Electrical Engineer or if you have experience working in a similar role, this could be the...

  • Design Systems Inc.

    6 days ago

    Farmington Hills, Michigan, United States Design Systems Inc. Full time

    About Design Systems Inc.We are a leading engineering company that specializes in delivering top-notch mechanical design solutions to our clients. Our team is comprised of highly skilled and experienced professionals who are passionate about creating innovative and efficient designs.Job SummaryWe are seeking highly qualified mechanical designers to join our...

  • Mechanical Engineer

    4 weeks ago

    Agoura Hills, United States CV Library Full time

    Title: Mechanical Engineer Location: Agoura Hills, CA (onsite only) Duration: 12+ months. Open to perm hire once skills, capabilities, and knowledge are demonstrated. Pay rate: $60 to $85/hr Job description: Working at Client in Agoura Hills, CA you will design and develop electro-mechanical assemblies used by the world's largest electronics...

  • Mechanical Designers

    4 months ago

    Farmington Hills, United States Design Systems Inc. Full time

    At Design Systems, Inc., we are always looking for mechanical designers and well-qualified employees in many disciplines of the engineering industry. It is our goal to staff our projects with top talent, and we would like to hear from you! If you have what it takes to be on the Design Systems, Inc. team, feel free to apply with your credentials. If we...

  • Mechanical Design and Development Specialists

    6 days ago

    Farmington Hills, Michigan, United States Design Systems Inc. Full time

    About Design Systems Inc.We are a leading provider of engineering services, dedicated to delivering high-quality solutions to our clients. Our team of experts is passionate about innovation and excellence, and we are always looking for talented individuals to join our ranks.Job SummaryWe are seeking highly skilled mechanical designers to join our team at...

  • Electrical Research Engineer

    2 weeks ago

    Terrell Hills, Texas, United States Southwest Research Institute Full time

    About Us:The Southwest Research Institute's Department of Space Instruments & Payloads comprises a diverse group of engineers, scientists, program managers, and technicians dedicated to the design and development of instruments and avionics for various space missions. Our projects span from Lunar Lander initiatives to deep space explorations, commercial...

  • Electrical Research Engineer

    2 weeks ago

    Terrell Hills, Texas, United States Southwest Research Institute Full time

    About Us:The Southwest Research Institute's Department of Space Instruments & Payloads comprises a diverse group of engineers, scientists, program managers, and technicians dedicated to the design and development of advanced instruments and avionics for various space missions. Our projects span from Lunar Lander initiatives to deep space explorations,...

  • Electrical Research Engineer

    2 weeks ago

    Terrell Hills, Texas, United States Southwest Research Institute Full time

    About Us:The Southwest Research Institute's Department of Space Instruments & Payloads is a diverse group of professionals, including engineers, scientists, program managers, and technicians, dedicated to the design and development of instruments and avionics for various space missions. Our projects encompass a wide range of endeavors, from Lunar Lander...

  • Electrical Systems Engineer

    2 weeks ago

    Terrell Hills, Texas, United States Southwest Research Institute Full time

    About Us:The Southwest Research Institute's Department of Space Instruments & Payloads is a diverse group of professionals including engineers, scientists, program managers, and technicians dedicated to the design and development of cutting-edge instruments and avionics for various space missions. Our projects span from Lunar Lander initiatives to deep space...

  • Senior Avionics Hardware Engineer

    6 days ago

    Woodland Hills, California, United States Blue Origin Full time

    Job SummaryBlue Origin is seeking a highly skilled Avionics Hardware Engineer to join our team. As a key member of our spacecraft electrical design team, you will be responsible for developing and leading digital, analog, and mixed-signal circuit avionic designs that interact with avionics systems.Key ResponsibilitiesDevelop and lead avionic designs,...

  • Design Engineer

    3 months ago

    Rochester Hills, Michigan, United States Hinduja Tech Full time

    The Design Engineer is expected to design & develop Electric Chargeport Door Assembly. Good experience in designing products with different material integration utilizing DFM/A for Injection Molding and Casting Processes is required. To create 3D CAD models using CATIA V5 for proposal studies and concept generation. Perform engineering calculations and...

  • Design Engineer

    3 months ago

    Rochester Hills, United States Hinduja Tech Full time

    The Design Engineer is expected to design & develop Electric Chargeport Door Assembly. Good experience in designing products with different material integration utilizing DFM/A for Injection Molding and Casting Processes is required. To create 3D CAD models using CATIA V5 for proposal studies and concept generation. Perform engineering calculations and...