CNC Machinist 2

3 weeks ago

Pearland TX United States J & J Alloys Full time
*Machinist Level 2*

_\*Shift Hours: 4:00 p.m. - 12:30 a.m._

JOB SUMMARY:

The Machinist will set-up and operate a CNC Lathe / Mill. The Machinist will implement all data entry systems and processes and will provide daily support for software programming applications.

REQUIREMENTS AND QUALIFICATIONS:

*Technical Skill Accountabilities:*
* Demonstrates a good working knowledge of machine tooling applications and servicing. Works closely with other machinists to provide technical assistance to tooling related issues.
* Demonstrate working knowledge of processes necessary to complete all assigned task within the production schedule.
* Able to run manual and CNC equipment.

*Manufacturing Process Accountabilities:*
* Demonstrates a good working knowledge of machine equipment functions and servicing. Able to perform preventive maintenance as
* assigned.
* *Demonstrates working knowledge of the process flow of parts through the manufacturing process.*
* Fully understands and implements all data entry systems and processes. Capable of reading prints and drawings
* CNC – Has a good understanding of machine control interfaces. Provides daily support for software programming applications.
* Displays a solid understanding of programming, editing and offset. Troubleshoots and resolves routing software issues.
* *Ensures that individual performance supports the shop’s efforts at maintaining performance standards in the areas of safety, cost of scrap/rework, on time performance, direct labor hours, manufacturing $/hr. and overtime $/dayQuality Assurance Accountabilities:*
* *Demonstrates a thorough understanding of inspection equipment, their functions and uses in order to ensure that all manufactured*
* *parts are machined within tolerance limitations.*
* *Supports and participates in CIP processes.*
* *Capable of receiving in bar stock and verifying type, lengths and dimensions. Demonstrates a thorough understanding of ISO*
* *procedures and uses them to better manage work processes and identify problems.*
* *Maintains minimal scrap and rework on all manufactured parts. Reports all discrepancies to management immediately*

*Communication Skill Accountabilities:*
* Demonstrates an advanced ability to communicate all manufacturing processes to peers and supervisors.
* Capable of communicating suspected equipment or tool failure in a timely manner.
* Demonstrates an ability to move to other areas of the shop as needed to include grinding, sawing, drilling material for other equipment as well as any other area of the shop as needed.

*Safety Accountabilities:*
* Demonstrates a thorough knowledge of complex ergonomic issues in the workplace and able to perform detailed analysis to resolve
* them. Able to evaluate complex workplace injuries and provide resolution to them. Monitors reported injuries and recommends improvements to reduce injuries.
* Has thorough understanding of regulatory compliance in order to be aware of accident prevention.
* Actively participates and completes all company sponsored training venues as scheduled.
* Demonstrates thorough understanding of SDS’s and how to locate them. Capable of identifying PPE as related to one’s job, and what application it is used for.
* Consistently demonstrates the basic ability to clean up after self. Picks up trash and debris and dispose of it properly or places it where it will not pose a hazard to others.
* Keeps work area clean throughout the day. Stacks materials and supplies orderly and secures them so they don't topple. Disposes of combustibles and flammables properly. Follows all planned housekeeping schedules communicated by the Lead.

*Additional Accountabilities:*
* Must be willing to work overtime as needed.
* Regularly lift and/or move objects up to 50 lbs.

Job Type: Full-time

Pay: $22.00 - $27.00 per hour

Benefits:
* 401(k)
* 401(k) matching
* Dental insurance
* Flexible spending account
* Health insurance
* Health savings account
* Life insurance
* Paid time off
* Referral program
* Tuition reimbursement
* Vision insurance
Schedule:
* 8 hour shift
* Monday to Friday
* Night shift
* Overnight shift
* Overtime
* Weekends as needed

Application Question(s):
* What is your current (or most recent) pay rate?
* The hours for this night shift position are 4:00 p.m. to 12:30 a.m. Training (3+ weeks) will take place on day shift (hours 8:00 a.m. to 5:00 p.m.)
Are you able and willing to work these shift hours?
* Have you operated any of the following? Femco, Puma, Doosan, Okuma Howa, Haas?
* Have you worked with fittings or flanges? If so, at which employer?
* Do you have experience working with nickel alloys or stainless steel? If so, which one? If so, at which employer?

Experience:
* CNC lathe: 3 years (Required)

Work Location: In person

  • CNC Machinist

    1 week ago

    Missouri City, TX, United States CNC Manufacturing Full time

    CNC Manufacturing is looking for experienced CNC machinists with a strong background in Fanuc and Okuma Controls. Must be able to do own setups with little to no supervision. We are looking for people who have a desire to advance and achieve success in their knowledge of CNC operations and grow with CNC Manufacturing as we continue our success as a leading...

  • CNC Machinist 2

    3 weeks ago

    Pearland, United States J & J Alloys Full time

    *Machinist Level 2*_\*Shift Hours: 4:00 p.m. - 12:30 a.m._JOB SUMMARY:The Machinist will set-up and operate a CNC Lathe / Mill. The Machinist will implement all data entry systems and processes and will provide daily support for software programming applications.REQUIREMENTS AND QUALIFICATIONS:*Technical Skill Accountabilities:** Demonstrates a good working...

  • CNC Machinist

    1 month ago

    Dallas, TX, United States Dixon Full time

    Job DescriptionWe are proud that we have been a U.S. manufacturer since 1916 and are looking for great people to continue the journey into the next 100 years! Join our diverse, dedicated, and engaged team and make the right connection for your career. Strong, values-based Family-owned company Global organization Team-oriented...

  • CNC Machinist II

    5 days ago

    Pearland, Texas, United States PrideStaff - Houston (Southeast) Full time

    Job OverviewPosition Title: CNC Machinist IIWork Schedule: Monday - Friday, 8:00 AM - 5:00 PMCompensation: $22-27 per hour (Dependent on Experience)Location: Pearland, TXExperience Requirement: A minimum of 5 years of relevant experience is preferred.We are pleased to present a new opportunity with PrideStaff, a leading staffing agency recognized nationally....

  • Machinist Level 2

    4 weeks ago

    Pearland, United States PrideStaff - Houston (Southeast) Full time

    Job DescriptionJob DescriptionCNC Machinist IIShift/Hours: Monday - Friday, 8:00-5:00 PMPay Rate: $22-27/hr (DOE)Location: Pearland, TX - 77581Experience: 5 years of experience preferred.We are excited to share a new opportunity! PrideStaff, a nationally recognized staffing company, has been given an opportunity to assist a bona fide top employer in the...

  • CNC Machinist Specialist

    5 days ago

    Pearland, Texas, United States The Reserves Network Inc Full time

    Job OverviewCNC Machinist SpecialistCompetitive compensation at $27.00 per hour with a $1 differential based on experience.Temporary to permanent position.Work schedule: Monday to Friday, 4:00 PM to 12:30 AM.Our client, a leading distributor of line pipe in the United States, is seeking a dependable CNC Machinist. In this role, you will be responsible for...

  • CNC Machinist Specialist

    5 days ago

    Pearland, Texas, United States The Reserves Network Inc Full time

    Job OverviewCNC Machinist II | $22-$27 per hour | 2nd ShiftKey HighlightsCompetitive compensation ranging from $22 to $27 per hour based on expertise.Work Schedule: 2nd Shift, Monday through Friday.Location: Pearland.Temporary-to-permanent position offering growth and stability.Weekly pay with options for direct deposit or pay card.Eligibility for dental,...

  • CNC Machinist

    6 days ago

    San Jose, CA, United States WessDel Full time

    Position Summary:  The Senior CNC Mill Set Up Machinist is responsible for setting up and operating any job, new or repeat, on CNC mills to achieve defect-free results within estimated timeframes. Utilizing shop equipment, this role focuses on delivering tasks punctually to meet both external and internal customer expectations. The Senior CNC Mill Set Up...

  • CNC Machinist

    7 days ago

    Tappahannock, VA, United States PALLET MACHINERY GROUP Full time

    Pallet Machinery Group, Inc, a manufacturing company located in Tappahannock, VA is looking to hire a CNC machinist to join our growing company. We have expanded our machine shop and are looking for an individual to help it reach its full potential. The shop has CNC mill, CNC Lathe, CNC Toolroom Mill and Plasma Table.

  • CNC Programmer/Machinist

    1 month ago

    Center, CO, United States Power Zone Equipment Full time

    Job Title: CNC MachinistJob Overview: We are seeking a highly skilled and detail-oriented CNC Machinist to join our team. As a CNC Machinist, you will be responsible for setting up, operating, and maintaining computer numerical control (CNC) machines to produce precision parts and components according to specifications. You will work with a variety of...

  • CNC Machinist

    2 months ago

    Portland, OR, United States OSMPI Full time

    Small Machining Company looking for Experienced CNC Swiss Setup Machinist.Candidate must have working knowledge of how to Set-up and operate CNC Swiss machines. Machinist will be able to set tooling run program and safely operate machines while providing accurate run data and daily time; collaborate with quality department and production manager to ensure...

  • CNC Machinist II

    4 weeks ago

    Pearland, United States The Reserves Network Inc Full time

    Job DescriptionJob DescriptionCNC Machinist II | $22-$27 an hour | 2nd Shift Monday through Friday 4pm to 1230am What Matters MostCompetitive pay rate of $22 to $27 an hour based on experience | $1 differential Schedule: 4pm to 1230am; Monday through Friday Location: Pearland Temporary-to-hire opportunity with career growth and stabilityWeekly Pay with...

  • CNC Machinist

    4 weeks ago

    Frazee, MN, United States Doherty Staffing Solutions Full time

    Bring your machine operating talents to this position in the Perham area! Doherty Staffing Solutions is partnering with a local manufacturing company in Frazee, MN. We re seeking candidates for CNC Machinist positions the 1st shift. Compensation for these opportunities is $20.00 per hour. Interested? Read below for more information!Company SummaryThis...

  • CNC Machinist

    1 month ago

    Auburn, NY, United States WMT Precision LLC Full time

    WMT Precision LLC, formerly Weaver Machine & Tool, has an opening for a 2nd shift Lead CNC Machinist to supervise a small second shift team. Four years of experience setting up and operating CNC machines is preferred. The selected person will train on 1st shift, M-F 6:30-3:00, for a minimum of 30 days to become familiar with our equipment and product line....

  • CNC Machinist

    2 months ago

    Hot Springs National Park, AR, United States CMT Inc. Full time

    CMT Inc, is located in Hot Springs, AR has openings for experienced machinists and CNC machine operators for Haas VMC’s, CNC WaterJet, and CNC Router. CMT is a supplier to leading machined parts supplier Aerospace and Defense contractors, and offers a full benefits package.Job Requirements Include:* *Minimum of 3 years experience in CNC Machining* , CNC...

  • CNC Machinist

    4 weeks ago

    Salunga-Landisville, PA, United States Bearon Manufacturing Full time

    Job DescriptionBearon Manufacturing is looking for a CNC Machinist to join our team in our climate-controlled environment in Landisville, PA! On 3rd shift you will receive a 12.5% shift premium! As an experienced CNC Machinist with 5 years in the field, you’ll play a vital role in setting up, operating, and maintaining CNC Machines.  You will also perform...

  • CNC Machinist

    1 month ago

    Port Jervis, NY, United States Manpower Full time

    Job DescriptionJob DescriptionOur client, small business specializing in the design and manufacture of custom cases and food service products is seeking a CNC Machinist / Programmer to join their team. As a CNC Machinist / Programmer, you will be part of the manufacturing team supporting the proper maintenance of machinery. The ideal candidate will have...

  • CNC Milling Machinist

    6 days ago

    Dayton, OH, United States FC INDUSTRIES INC Full time

    Description:ABOUT US:Established in 1972, FC Industries is in its second generation of family ownership and management and has grown into a metal manufacturing powerhouse. We are a leader in manufacturing services able to handle complex programs, creating manufacturing solutions that lower costs and increase efficiencies.As a CNC Milling Machinist at FC...

  • CNC Machinist

    4 weeks ago

    Fullerton, CA, United States Manpower Full time

    Job DescriptionJob Description2nd Shift CNC Lathe Machinist What is in it for you? Full time hours. Monday -Friday (Occasional Saturdays)2nd Shift 3:30pm-12am plus overtime Weekly Pay ( Every Friday)True Temp to Hire OpportunityCompetitive pay $24-26 per hour based on experience Your Responsibilities:Set up and run CNC lathes.Must have the ability to...

  • CNC Machinist

    4 weeks ago

    Fenton, MO, United States Control Devices LLC Full time

    Position Title: CNC MachinistDepartment: Machine ShopLocation: Fenton, MOReports To: Production Supervisor - Machine ShopClassification: Hourly - Non-ExemptTypical Hours: Weekend Shift - (Friday - Sunday 5:00am - 5:00pm)Position Summary:CNC Machinist/Operator position responsible for machining of components using a variety of CNC lathes and mills while...