![Oil States International](https://media.trabajo.org/img/noimg.jpg)
Assembler I
2 months ago
** Assembler I**
**Job Category****:** Manufacturing **Requisition Number****:** ASSEM002329 Showing 1 location **Job Details**
**Description**
**POSITION SUMMARY:**
Assemble component parts using a variety of hand tools and machine tools.
**ESSENTIAL DUTIES AND RESPONSIBILITIES:**
* Assembles component parts using a variety of hand tools.
* Pin obsidian plug to ensure components are aligned and in place.
* Pill slips for assembly.
* Final trim if needed.
* Maintains a clean work area.
* Perform work safely.
* Perform other duties as assigned by supervisor.
* Record time in Mercury.
* Perform all tasks as required of a Safety Sensitive position.
**OTHER DUTIES AND RESPONSIBILITIES:**
* Work as a team to meet daily goals
* Collaborate with co-workers to problem solve
**QUALIFICATION REQUIREMENTS:**
* Basic math skills
* Familiar with hand tools, bench equipment
* Basic verbal and written communication skills
* Reading comprehension skills
* Ability to work independently or in a team environment
* Able to exercise good judgement
* Ability to contribute towards the success of a team
**PHYSICAL REQUIREMENTS**
* Moderate physical effort required.
* Frequent standing
* Prolonged sitting
* Repetitive motion of finger, wrist, elbow, shoulder or neck movement
* Frequent use of finger tips
* Lifting up to 20 pounds from floor to waist
* Ability to speak clearly
* Reaching/lifting while holding objects weighing up to 20 pounds
* Seeing to visually inspect, measure/assemble at a close distance
**WORK ENVIRONMENT/ENVIRONMENTAL CONDITIONS:**
* Inside manufacturing facility in a climate controlled environment
* Occasional exposure to hazardous chemicals, fumes and gases
* High noise level
**SAFETY SENSITIVE POSITION:**
* This position is designated as a Safety Sensitive Position as defined by the Oklahoma Medical Marijuana and Patient Protection Act.
This job description in no way states or implies that these are the only duties to be performed by this position. The incumbent is required to perform any other duties requested by his/her supervisor.
**Skills**
**Preferred**
**Manufacturing Experience** *Some Knowledge* **Hand Tools** *Some Knowledge* **Decision Making** *Some Knowledge* **Attn to Detail** *Intermediate* **Basic Math** *Some Knowledge* **Education**
**Preferred**
High School/GED or better.
**Experience**
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractors legal duty to furnish information. 41 CFR 60-1.35(c)
-
Production Assembler I
3 weeks ago
Tulsa, United States Chart Industries Full timeProduction Assembler I **Location:** Tulsa, OK, United States, 74115 **Company:** Chart Industries **_Ensuring Charts Success_** Chart's Assembler position plays a key role in the manufacturing process of Chart's products. This position will be responsible for helping to produce high quality manufactured products used all over the world. **_What Your...
-
Assembly Tech I
1 month ago
Tulsa, United States Lloyd Richards Personnel Services Full timeAssembly Tech IEssential Functions Ability to read and interpret piping and instrumentation diagram drawings and blueprints Cut and thread pipe Must be able to read a tape measure Completes tasks as directed by manufacturing schedules with minimum supervision knowledge of pipe fittings, valves, and switches Ability to operate a forklift and crane Hours:...
-
Assembly Tech I
2 months ago
Tulsa, United States Lloyd Richards Personnel Full timeJob DescriptionJob DescriptionAssembly Tech IEssential FunctionsAbility to read and interpret piping and instrumentation diagram drawings and blueprintsCut and thread pipeMust be able to read a tape measureCompletes tasks as directed by manufacturing schedules with minimum supervisionknowledge of pipe fittings, valves, and switchesAbility to operate a...
-
Assembler I
7 days ago
Tulsa, United States AMETEK Full timeAs an assembler you will work in the fast-paced Technical Operation department. The Assembler plays a very important role in providing quality service to our internal customers. The Assembler should have strong working knowledge and abilities to perf Assembler, Manufacturing
-
Assembler I
2 weeks ago
Tulsa, United States AMETEK Full timePosition Summary: As an assembler you will work in the fast-paced Technical Operation department. The Assembler plays a very important role in providing quality service to our internal customers. The Assembler should have strong working knowledge and abilities to perform repairs and manufacture parts on a daily basis. About the job: • Work from...
-
Assembly Tech I
1 month ago
Tulsa, United States Lloyd Richards Personnel Services Full timeAssembly Tech IEssential FunctionsAbility to read and interpret piping and instrumentation diagram drawings and blueprintsCut and thread pipeMust be able to read a tape measureCompletes tasks as directed by manufacturing schedules with minimum supervisionknowledge of pipe fittings, valves, and switchesAbility to operate a forklift and crane Hours:...
-
Mechanical Assembly Technician
22 hours ago
Tulsa, Oklahoma, United States NOV Inc Full timeJob Title: Equipment Assembly TechnicianCompany: NOV IncJob Responsibilities:Assemble and test ESP equipment to ensure optimal performance and efficiency.Review and analyze work orders and blueprints to identify key components and requirements.Apply basic math skills to calculate quantities and measurements.Operate forklifts and other equipment to load and...
-
Production Assembler I
1 month ago
Tulsa, United States Chart Industries Full timeEnsuring Chart’s Success… "Chart’s vision is to be the global leader in the design, engineering and manufacturing of cryogenic process technologies and equipment for the Nexus of Clean™ - clean power, clean water, clean food and clean industrials, regardless of molecule.” – Jill Evanko, CEO of Chart Industries “Cooler By Design” -...
-
Trim, Extruder, Assembler
3 months ago
Tulsa, United States Abundant Solutions Full timeJob DescriptionJob DescriptionTulsa Manufacturer has several positions available!! LOTS OF OVERTIME!!!All positions are safety sensitive and can be trained. Please apply in person at Abundant Solutions 5151 S Mingo Rd, Tulsa OK 74146$150 SIGN ON BONUS $150 REFERRAL BONUS5am to 5pm shifts or 5pm to 5am shifts....Bus schedule does not work with these hours...
-
Structural Mechanic I
1 month ago
Tulsa, United States PDS Tech Full timeThe candidate will work as a Structural Mechanic I during the second shift in Tulsa. They will perform various structural assembly operations in a production environment, including drilling and riveting parts according to blueprints and ensuring that Structural, Mechanic, Construction, Staffing, Shift
-
Quality Assurance Inspector I
4 days ago
Tulsa, Oklahoma, United States The Crosby Group Full timePosition OverviewShift Details: This role is for the 2nd Shift QA Position.Job SummaryThe Quality Assurance Inspector I is responsible for conducting comprehensive inspections to ensure that all materials and components meet the established quality standards of The Crosby Group. This includes evaluating raw materials, in-process parts, coatings, heat-treated...
-
Machine Tech I
3 months ago
Tulsa, United States Warren CAT Full timeTEAM UP WITH US! The Machine Technician I is responsible for providing high quality repair service on equipment, in order to respond to customer needs in a positive, caring and timely manner and to ensure maximum value for work performed. Typical Work Schedule is Friday - Sunday 12 hour shifts DO YOU HAVE WHAT IT TAKES? WHAT YOU'LL DO Complete assigned jobs...
-
Production Supervisor I
4 weeks ago
Tulsa, United States Chart Industries Full timeEnsuring Chart’s Success…Based on general direction from Manager, plans and sets monthly and quarterly objectives for one or more production departments to ensure smooth workflow, quality production and on-time delivery. Monitors performance of Production Leads and team members and coaches for improved quality and quantity of work. Responsible for...
-
QA Inspector I
2 months ago
Tulsa, United States THE CROSBY GROUP Full timeThis is a 2nd Shift QA PositionJob SummaryPerforms all level inspections, working to prescribed tolerances, to check and approve for quality, raw materials, parts in process, paintings and coatings, heat treating (verify Brinell hardness), components, sub-assemblies, final assemblies, tooling, returned items, and parts and sub-assemblies received from...
-
Aerospace QC Inspector I Tulsa OK
3 months ago
Tulsa, United States Aviation Technology Associates LLC Full timeAviation Technology Associates (AVTECH) is looking for a QC Inspector I in Tulsa, OK Position Purpose: In a team oriented environment, perform all tasks in Initial Phase Manufacturing, Composites, Final Phase in a timely and efficient manner to ensure aircraft parts, sub-assemblies, major assemblies, and installations are built to type design data. Principle...
-
CAD Design Drafter I
3 months ago
Tulsa, United States Levare USA Full timeJob DescriptionJob DescriptionPosition SummaryCollaborate with engineers to create electro-mechanical product designs and technical documentation needed for concepts, prototypes, fabrication, production and support. This includes creating drawings, models and assemblies of structures, systems, components or equipment from sketches or marked up prints. Job...
-
QA Inspector I
3 months ago
Tulsa, United States The Crosby Group Full timeThis is a 2nd Shift QA PositionJob Summary Performs all level inspections, working to prescribed tolerances, to check and approve for quality, raw materials, parts in process, paintings and coatings, heat treating (verify Brinell hardness), components, sub-assemblies, final assemblies, tooling, returned items, and parts and sub-assemblies received from...
-
Quality Assurance Engineer I
3 days ago
Tulsa, Oklahoma, United States PDS Tech Full timeElevate Your Career with PDS TechPosition: Quality Assurance Engineer IJob Type: Full Time; ConsultantSchedule: 1st ShiftCompensation: $37.42 per hourRole Overview:Are you driven by a commitment to quality and continuous enhancement? As a Quality Assurance Engineer I, you will play a pivotal role in providing technical assistance to address known quality...
-
Quality Assurance Inspector I
4 days ago
Tulsa, Oklahoma, United States The Crosby Group Full timeThis is a 2nd Shift Quality Assurance RolePosition OverviewThe Quality Assurance Inspector I is responsible for conducting comprehensive inspections across various stages of production to ensure adherence to quality standards. This role involves evaluating raw materials, in-process components, and finished products to confirm they meet the established...
-
Machine Operator
3 weeks ago
Tulsa, United States Trinity Employment Specialists Full timeJob DescriptionJob DescriptionHotline Assembler I Machine Operator$15-$16 an hourDays M-TH (5 am to 3 pm), with 2 paid 15 minute breaks.Hotline Assembler I- An employee with the title of Assembler I will be expected to competently perform the following duties: (This is a general list and is not meant to be restricted to only those duties listed. At any time,...