Manufacturing Engineer
2 weeks ago
JOB SUMMARY:
Plan, direct and coordinate manufacturing processes in a manufacturing plant. FABRICATION EXPERIENCE REQUIRED
ESSENTIAL PERFORMANCE REQUIREMENTS:
below is some guidance in the type of person I am looking for. We do not want someone from an Automotive background – needs to be from a fabrication background.
Qualities / Experience:
- Experience working in a weld fabrication environment
- Products to include complete systems with welded, machined and purchase parts assembled together to produce a finished piece of 'equipment'.
- Experience reviewing assembly drawings to provide shop floor guidance for efficient start up of production runs
- Interface between the shop floor and Engineering for drawing changes
- Blueprint reading
- Knowledge to create shop floor routings to produce parts
- Basic understanding of
- Welding
- Forming
- Press brake
- Strong computer skills
- Self-motivated
Desired
- Experience setting up production lines for short production runs of 200 or less 'fabricated assemblies'
- Solid Works experience
- Experience designing tooling / fixtures for weldments
- Hands on experience in welding/forming/machining
Education/Experience
Bachelor of Science in Engineering/Manufacturing/Industrial Engineering and five to seven years related experience and/or training; or equivalent combination of education and experience.
- Knowledge and Skills
Must be able to read and interpret a technical data package, schematics and drawings.
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.
Ability to gain the trust of manufacturing personnel to be able to communicate/support their daily requirements.
Basic data entry skills, required; Microsoft Office; drafting skills (preferably computer aided).
Proven mechanical abilities, knowledge of various electrical and mechanical processes, assembly techniques and hand tool use.
-
Manufacturing Engineer
2 months ago
Shelby, United States Enhance Recruiting Full timeJob DescriptionJob DescriptionSUMMARYWe are seeking a Manufacturing Engineer for a motor vehicle manufacturer in Shelby, NC. If you are a self-starter with experience reviewing assembly drawings, basic understanding of welding, forming, and press brake…we want to hear from you. RESPONSIBILITIESExperience working in a weld fabrication environmentProducts...
-
Manufacturing Engineer
2 months ago
Shelby, United States Talent Search Group, Inc Full timeJOB SUMMARY:Plan, direct and coordinate manufacturing processes in a manufacturing plant. FABRICATION EXPERIENCE REQUIRED!ESSENTIAL PERFORMANCE REQUIREMENTS:below is some guidance in the type of person I am looking for. We do not want someone from an Automotive background – needs to be from a fabrication background.Qualities / Experience:Experience working...
-
Senior Manufacturing Engineer
2 weeks ago
Shelby, North Carolina, United States Curtiss-Wright Full timeSenior Manufacturing Engineer We are seeking a Senior Manufacturing Engineer to enhance our operational capabilities. In this role, you will be responsible for developing CNC programs utilizing Esprit software. Your programming tasks will involve intricate multi-axis operations, primarily focusing on Turn-Mills, while also encompassing complex surface and...
-
Manufacturing Engineer, Sr
4 weeks ago
Shelby, United States Curtiss-Wright Full timeManufacturing Engineer We are looking for a Manufacturing Engineer to join our Shelby team! As our Manufacturing Engineer you will write CNC programs using Esprit. Your programming will consist of a high level of complexity; typically, 3 + 2 multi-axis programming for Turn-Mills, but may include complex surface, and 5-axis tool paths. You will verify CNC...
-
Manufacturing Engineer
3 days ago
Shelby Township, United States Zobility Full timeWe're looking for someone with 3+ years of experience or so in the manufacturing domain. This could be controls engineering or any other role in the manufacturing domain that will help them manage conversations with our manufacturing customers and know the technical terms that they use.So if someone has any kind of experience in the manufacturing domain +...
-
Manufacturing Engineer
1 day ago
Shelby Township, United States Zobility Full timeWe're looking for someone with 3+ years of experience or so in the manufacturing domain. This could be controls engineering or any other role in the manufacturing domain that will help them manage conversations with our manufacturing customers and know the technical terms that they use.So if someone has any kind of experience in the manufacturing domain +...
-
Specialty Vehicle Manufacturing Engineer
2 weeks ago
Shelby, North Carolina, United States International Staff Consulting Full timeManufacturing EngineerLocation: Shelby, North CarolinaCompensation: $90-$120k, plus bonus and relocationJOB SUMMARY:Oversee, organize, and manage manufacturing operations within a production facility.KEY RESPONSIBILITIES:Identify and implement best practices, assess, and enhance manufacturing techniques for assembly, fabrication, and cutting sectors. Provide...
-
Manufacturing Engineer, Specialty Vehicles
3 months ago
Shelby, United States International Staff Consulting Full timeManufacturing Engineer Shelby North Carolina $90-$120k, plus bonus and relocation JOB SUMMARY: Plan, direct and coordinate manufacturing processes in a manufacturing plant. ESSENTIAL PERFORMANCE REQUIREMENTS: - Develop best practices, evaluate, and improve manufacturing methods for assembly, fabrication and cutting departments. Train employees in these...
-
Manufacturing Engineer
4 weeks ago
Shelby Township, United States NETFORM Full timeJob DescriptionJob DescriptionSummaryProvide expertise and support production in the areas of machining, flowforming, broaching, deburring and automation activities for the company. Essential Duties and Responsibilities Responsibilities of this position include, but are not limited to, the following: Owns and manages assigned cells/products, reporting out...
-
Manufacturing Engineer
3 days ago
Shelby Township, United States RGBSI Full timeYou'll be in charge of:Understanding each customers manufacturing lines, processes, controls architecture as a part of the initial requirement study in assisting the salesand proposal process.Holding product demonstrations for customers to showcase value of the product in increasing the efficiency of their lines.Creating, planning, and tracking the...
-
Welding Manufacturing Specialist
2 weeks ago
Shelby, North Carolina, United States Executive Alliance Full timePosition Overview: We are seeking a skilled Welding Manufacturing Specialist to join our dynamic team at Executive Alliance. This role is essential in ensuring the efficiency and quality of our manufacturing processes, particularly in the welding domain. Key Responsibilities: As a Welding Manufacturing Specialist, you will be responsible for: Overseeing the...
-
Manufacturing Engineer
4 weeks ago
Shelby, United States International Staff Consulting Full timeWe need someone with experience working in a weld fabrication environment and heavier gauge steel. Products include complete systems with welded, machined and purchase parts assembled together to produce a finished piece of 'equipment'. Experience reviewing assembly drawings to provide shop floor guidance for efficient start-up of production runs Interface...
-
Manufacturing Engineer
1 day ago
Shelby Charter Township, United States RGBSI Full timeYou'll be in charge of:Understanding each customers manufacturing lines, processes, controls architecture as a part of the initial requirement study in assisting the salesand proposal process.Holding product demonstrations for customers to showcase value of the product in increasing the efficiency of their lines.Creating, planning, and tracking the...
-
Manufacturing Execution System Engineer
4 weeks ago
Shelby Township, United States Zobility Full timeManaging a portfolio of customers to ensure delivery of expected value while using the product.Translating customer requirements in terms of product features and feeding new feature requirements to the product team to improve the product capabilities .Looking for expansion opportunities with customers to upgrade & expand onto other lines.Managing projects...
-
Manufacturing Execution System Engineer
2 months ago
Shelby Township, United States Zobility Full timeManaging a portfolio of customers to ensure delivery of expected value while using the product.Translating customer requirements in terms of product features and feeding new feature requirements to the product team to improve the product capabilities .Looking for expansion opportunities with customers to upgrade & expand onto other lines.Managing projects...
-
Manufacturing CNC Specialist
2 weeks ago
Shelby, North Carolina, United States Jobot Full timeJoin a Leading Player in the Automotive SectorOur organization stands at the forefront of the production and innovation of automotive aluminum and magnesium cast components. We are committed to delivering value-driven services, sustainable manufacturing practices, and top-tier products globally. Become part of a team that prioritizes creativity and...
-
Mechanical Design Engineer
2 months ago
Shelby, United States Enhance Recruiting Full timeJob DescriptionJob DescriptionSUMMARYSeeking a Mechanical Design Engineer with a leading role in the design and development of new products, equipment, structural and equipment upgrades to defense equipment and vehicles, from requirements and concept, detail design, to manufacturing and prototype test. This is a design, R&D, hands-on testing, focused heavily...
-
Electrical Engineer
1 week ago
Shelby, United States JVIS USA Full timeJob DescriptionJob DescriptionSUMMARY: The Electrical Engineer is primarily responsible for the research, design, and development and testing of electrical systems and components for products by performing the following responsibilities. Reports directly to the Electrical Engineering Manager. ESSENTIAL DUTIES AND RESPONSIBILITIES include the...
-
Quality Engineer
1 month ago
Shelby, United States Amotec Inc Full timeJob DescriptionJob DescriptionAmotec is conducting a search for a Quality Engineer on behalf of our client, a $5.7B publicly traded company with over a century of industry leadership. The Quality Engineer reports directly to the Quality Manager and is responsible for ensuring that products meet the required quality standards throughout the production...
-
Fabrication Process Engineer
2 weeks ago
Shelby, North Carolina, United States Talent Search Group, Inc Full timePOSITION OVERVIEW:Oversee, strategize, and manage manufacturing operations within a fabrication facility. FABRICATION EXPERIENCE IS ESSENTIAL.KEY RESPONSIBILITIES:The ideal candidate will possess the following attributes:Proven experience in a welding fabrication setting.Involvement with products that encompass complete systems, integrating welded, machined,...