Manufacturing Process Specialist

1 week ago

Athens, United States US Tech Solutions Full time

Duration: 12 months contract,Full-Time


Employment Type: W-2



Job Description:

  • The Process Specialist is the technical expert who is responsible for providing technical support
  • for the Active Pharmaceutical Ingredient (API), medical device raw material or medical device component manufacturing processes under limited direction of operations management. These responsibilities include providing technical expertise to ensure that atypical event and nonconformance investigations relating to production are completed in compliance with all applicable procedures and regulations, monitors and trends key process parameters, troubleshoots manufacturing problems as required and identifies and implements process improvements, supports capital projects, site wide initiatives or other projects as needed in the capacity of a project lead or a subject matter expert and conducts technical and validation studies.
  • Provides primary (on floor) production support.
  • Plan, prepare, issue, and control production schedule and material requirements to ensure control flow of approved material timed to meet production plan.
  • Facilitate the implementation of the production plan.
  • Takes corrective action for daily operational problems within the department.
  • Act as subject matter expert (SME), providing guidance on deviations, investigations, and issues pertaining to quality of product.
  • Study the need for improvements of existing processes, systems and equipment, and in cooperation with related departments, undertakes optimization to increase efficiency and quality and to reduce costs.
  • Recommends and implements corrective/preventative measures aimed at improving compliance and reducing repeat occurrences. Follow up to determine if corrective
  • actions adequately addressed root cause of NC event.
  • Provides technical support for the investigation and resolution of deviations and atypical events by partnering with Quality Assurance to ensure consistent quality standards are maintained.
  • Tracks deviations, events and key process parameters and provides reports to management on trending, and status as requested. Recommends corrective actions for
  • any trends identified.
  • Identifies and implements process improvements related to safety, environmental, quality, compliance, productivity, yield, and cost. Assure regulatory compliance and
  • technical feasibility of proposed changes.
  • Initiate and execute change controls for projects.
  • Retrieve and use data to monitor process performance and proactively troubleshoot; operations. Work with Automation and Information Management to improve the; effectiveness of process data collection and analysis.;
  • Ensure department quality and safety compliance.;
  • Plan and direct the administration and implementation of assigned projects as required; for the manufacture of the company's products.;
  • Live Our Credo and Purpose by putting the need of Our Credo; stakeholders first, pursuing the highest standards of compliance, quality and ethics.
  • Connect inclusively within the department, with other departments, and within the; company to address customer needs.;
  • Shape the future through innovation by inspiring new ideas, trying new things, and; demonstrating resilience and agility to adapt to change.;
  • Grow by developing self and others to reach goals by engaging in open and honest; conversations, managing energy, and taking ownership for outcomes.; Additional position requirements:;
  • Provide documentation support for SOP/ Batch Record revisions.;
  • Identify necessary document changes and ensure timely revision to all SOP and batch; records.;
  • Review and approve SOP and batch record revisions.;
  • Assist with equipment startup and technical training as required.;
  • Provide technical support for process and cleaning validation maintenance and; verification. Assist with cleaning cycle optimization and revalidation efforts.;
  • Demonstrates expertise in the following areas: cGMPs, FDA regulations, manufacturing; processes, manufacturing equipment, high purity water systems, and utilities.;
  • Responsible for handling controlled substances in compliance with applicable State and; local law and requirement.



Responsibilities:

  • Generally, 4-6 years of work experience in a chemical, pharmaceutical, medical device or similarly regulated manufacturing industry.
  • Ability to learn and operate SAP Production, COMET, SUMMIT, to the level required.
  • Technical understanding of at least one processing area.
  • Ability to read, analyze and interpret procedure manuals, common scientific and technical journals, basic financial reports and legal documents, general business periodicals and government regulations.
  • Ability to respond to sensitive inquiries and present information to Site Management, regulatory agencies and members of the business community.
  • Ability to define problems, collect relevant data and information, establish facts, and draw valid conclusions as required.
  • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
  • Demonstrated ability to write effectively to communicate work prepared, rationalize conclusions and recommendations, and compliantly document for regulatory bodies.
  • Manage and coordinate multiple project priorities as required.
  • Ability to work independently on routine and non-routine tasks.
  • •Successfully completes regulatory and job training requirements.
  • Remains current in skills and industry trends


Experience:

  • Role is more "Process Specialist"
  • The role is in the API Manufacturing, a Senior Role
  • Will help support day-to-day operations
  • Must have excellent Communication skills
  • Must have excellent Time Management skills
  • Must have GMP exp
  • Will work with non-performance investigations, document investigations, and help provide corrective actions
  • Will be working with Manufacturing Supervisors and Planners
  • Should have Technical Writing exp
  • Need someone who can learn the Science aspect of the job
  • This is an Automated Process, should be familiar with those environments
  • Must have at least 2 yrs exp


Preferred:

  • Experience with SAP and Minitab.
  • Experience with process control systems (e.g. PCS 7, Emerson DeltaV) and data historian software (e.g. OSi PI).
  • Solid understanding of Word, Power Point, and Excel.


Skills:

Must have exp in API bkg



Education:

Bachelors Required


About US Tech Solutions:

US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit


US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.


Recruiter Details:

Name: Azhar

Email: Azhar@ustechsolutionsinc.com

Internal Id: 24-16830

  • Manufacturing Process Specialist

    4 weeks ago

    Athens, Tennessee, United States DENSO International America , Inc. Full time

    Position OverviewThe Manufacturing Process Specialist plays a crucial role in the enhancement and optimization of production techniques within the organization. This position involves:Research and Development: Conducting thorough investigations to design and refine fabrication techniques, tools, and systems.Collaboration: Working closely with...

  • Manufacturing Process Specialist

    4 weeks ago

    Athens, Georgia, United States JobsRUs Full time

    Job OverviewJobsRUs is looking to recruit a Manufacturing Process Specialist to join our esteemed client in the Spring area. Compensation: $100/HourKey Responsibilities:This position offers the flexibility of full-time or part-time hours, with an expectation of full-time commitment during the initial weeks. The standard working hours are from 8 AM to 5 PM,...

  • Manufacturing Process Specialist

    4 weeks ago

    Athens, Tennessee, United States DENSO International America , Inc. Full time

    Position OverviewThe Manufacturing Process Specialist plays a crucial role in enhancing and refining production techniques within the organization. This position involves:Development and Evaluation: Assessing and innovating manufacturing methodologies to ensure efficiency and effectiveness.Research and Design: Conducting thorough research to create and...

  • Manufacturing Process Specialist

    1 week ago

    Athens, United States US Tech Solutions Full time

    Duration: 12 months contract,Full-Time Employment Type: W-2 Job Description: The Process Specialist is the technical expert who is responsible for providing technical support for the Active Pharmaceutical Ingredient (API), medical device raw material or medical device component manufacturing processes under limited direction of operations management. These...

  • Manufacturing Process Specialist

    1 week ago

    Athens, United States US Tech Solutions Full time

    Duration: 12 months contract,Full-TimeEmployment Type: W-2 Job Description:The Process Specialist is the technical expert who is responsible for providing technical supportfor the Active Pharmaceutical Ingredient (API), medical device raw material or medical device component manufacturing processes under limited direction of operations management. These...

  • Manufacturing Process Specialist

    2 weeks ago

    Athens, United States Pioneer Data Systems Full time

    Our client, a world-leading Pharmaceutical Company in Athens, GA is currently looking for a Manufacturing Process Specialist to join their expanding team. Position Details: Job Title: Manufacturing Process Specialist / Pharma Industry Duration: 15....

  • Manufacturing Process Expert

    4 days ago

    Athens, Georgia, United States US Tech Solutions Full time

    Job DescriptionUS Tech Solutions is seeking a highly skilled Manufacturing Process Specialist to join our team.The successful candidate will be responsible for providing technical support for the Active Pharmaceutical Ingredient (API) and medical devices.Key Responsibilities:Provide technical expertise to ensure the smooth operation of manufacturing...

  • Manufacturing Process Specialist

    4 weeks ago

    Athens, Alabama, United States InTech Athens Full time

    Job OverviewPosition SummaryWe are seeking a skilled Process Engineer to enhance our manufacturing capabilities.Company OverviewInTech Athens is a pioneering force in the production of orthopedic medical devices. Our commitment to innovation sets us apart in the industry. With state-of-the-art facilities globally, we are dedicated to advancing technology in...

  • Manufacturing Process Specialist

    4 weeks ago

    Athens, Alabama, United States InTech Athens Full time

    Job OverviewPosition SummaryWe are seeking a skilled Process Engineer to enhance our manufacturing capabilities.Company OverviewInTech Athens is a pioneering entity in the orthopedic medical device sector, recognized for its commitment to innovation. Our global presence and advanced manufacturing facilities enable us to lead in the technological advancements...

  • Manufacturing Process Specialist

    3 weeks ago

    Athens, Alabama, United States InTech Athens Full time

    Job OverviewPosition SummaryWe are seeking a skilled Process Engineer to enhance our manufacturing capabilities.Company OverviewInTech Athens is a leading innovator in the production of orthopedic medical devices. Our commitment to innovation sets us apart in the industry. With advanced manufacturing facilities globally, we prioritize technological...

  • Manufacturing Process Optimization Specialist

    1 week ago

    Athens, Georgia, United States First Brands Group, LLC Full time

    Job SummaryFirst Brands Group, LLC is seeking a highly skilled Manufacturing Maintenance Engineer to join our team. As a key member of our operations team, you will be responsible for developing and implementing optimal manufacturing processes and methods to drive business growth and profitability.Key ResponsibilitiesProcess Improvement: Develop and...

  • Manufacturing Process Engineer

    2 weeks ago

    Athens, Georgia, United States Plastic Executive Recruiters Full time

    Job SummaryWe are seeking a highly skilled Manufacturing Process Engineer to join our team at Plastic Executive Recruiters. As a key member of our organization, you will play a critical role in creating and refining processes to improve manufacturing safety, quality, and productivity.Key ResponsibilitiesProcess Development: Create and maintain work...

  • Manufacturing Process Engineer

    3 weeks ago

    Athens, Georgia, United States Fast Lane Recruitment Group Full time

    Job OverviewSalary: $75k-85kPosition: Manufacturing Process EngineerLocation: Monroe, GAKey Responsibilities:Conducts research, design, and development of manufacturing workflows, assembly techniques, and production machinery.Creates and updates comprehensive layouts for facilities and equipment.Oversees the introduction of new or modified products into...

  • Manufacturing Process Engineer

    4 weeks ago

    Athens, Georgia, United States DBSI Services Full time

    Job OverviewPosition Title: Industrial / Manufacturing EngineerLocation: Athens, GARole Summary:The Industrial / Manufacturing Engineer will play a crucial role in enhancing operational efficiency and productivity within our manufacturing processes. The ideal candidate will possess a strong background in engineering principles and be adept at utilizing...

  • Manufacturing Process Engineer

    4 weeks ago

    Athens, Georgia, United States DBSI Services Full time

    Job OverviewPosition Title: Industrial / Manufacturing EngineerLocation: Athens, GARole Summary:The Industrial / Manufacturing Engineer will play a crucial role in enhancing operational efficiency and productivity within our manufacturing processes. This position involves a comprehensive understanding of various engineering principles and methodologies to...

  • Manufacturing Process Engineer

    4 weeks ago

    Athens, Georgia, United States DBSI Services Full time

    Job OverviewPosition Title: Industrial / Manufacturing EngineerLocation: Athens, GARole Summary:The Industrial / Manufacturing Engineer will play a pivotal role in enhancing operational efficiency and productivity within the manufacturing environment. The ideal candidate will possess a strong background in engineering principles and methodologies,...

  • Manufacturing IT Solutions Specialist

    4 weeks ago

    Athens, Tennessee, United States Caterpillar Brazil Full time

    Your Impact at Caterpillar Brazil:Joining Caterpillar means becoming part of a global community that values collaboration and innovation. We are dedicated to not only our work but also to each other, striving to create sustainable and thriving communities.About the Role:As a Manufacturing IT Solutions Specialist, you will take on the role of the primary IT...

  • Manufacturing Process Engineer

    4 weeks ago

    Athens, Georgia, United States E-Solutions INC Full time

    Job OverviewPosition: Industrial / Manufacturing EngineerCompany: E-Solutions INCRole Summary:The Industrial / Manufacturing Engineer will be responsible for optimizing production processes and enhancing operational efficiency. This role involves a comprehensive analysis of workflow and resource allocation to ensure maximum productivity.Key...

  • Manufacturing Process Engineer

    4 weeks ago

    Athens, Georgia, United States E-Solutions INC Full time

    Job OverviewPosition: Industrial / Manufacturing EngineerCompany: E-Solutions INCOverview of Responsibilities:Conducting Time Studies and optimizing Line Balancing processes,Performing Value-Added/Non-Value-Added analysis utilizing TimerPro Software,Developing Value Stream Maps (VSM) and comprehensive Work Instructions,Implementing Lean Manufacturing...

  • Senior Manufacturing Process Engineer

    4 weeks ago

    Athens, United States The Fountain Group Full time

    Max Pay: $97.37/HourOverview: Provide manufacturing support of current processes and process improvement initiatives as well as providing support to Capital Project initiatives to install new process equipment, production facilities, and/or process utilities. The position is the SME (Subject Matter Expert) for aseptic manufacturing processes....