Calibration Technician B

2 months ago

Santa Clara, United States SIMCO Electronics Full time

Position Overview


The Calibration Technician B will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician B will identify and utilize appropriate manual and automated measurement procedures.

This position will normally receive no instruction on work, applying job skills and company policies and procedures to complete a wide range of difficult tasks, and working on assignments that are moderately complex in nature where judgment is required in resolving problems and making routine recommendations. The Calibration Technician B will perform laboratory housekeeping and may perform some administrative duties. The Calibration Technician B may be asked to report opinions and interpretations.


Responsibilities and Duties

  • Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines – Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications
  • Maintain primary and/or intrinsic calibration standards
  • Maintain secondary and/or working calibration standards
  • Perform maintenance, troubleshooting and repair of precision equipment
  • Develop calibration procedures and methods, according to detailed specifications, blueprints, drawings, and other technical requirements
  • Collect, compile, measure, summarize, and record data gathered during calibration.
  • Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc
  • Identify and correct measurement errors, as applicable
  • Prepare calibration reports and certificates
  • Adapt existing calibration equipment, standards, and techniques to accomplish unique measurements tasks for which they are not principally used
  • Perform uncertainty evaluation and analysis for measurement standards and associated measurement processes
  • Train subordinates in calibration concepts and procedures
  • Interact with other technicians, Customer Service Representatives, Account Managers, and customers
  • Other duties and responsibilities as may be assigned



Qualifications

  • Minimum High School diploma or equivalent
  • Must be able to perform general math and algebra functions
  • Understanding of Basic Statistics
  • Must possess good written and oral, communication skills
  • Technical writing ability
  • Intermediate ability to troubleshoot repair, align and optimize precision equipment
  • Intermediate computer skills
  • Proficient in use of MS Word and Excel
  • Minimum three years of calibration experience some of which can be offset with formal metrology training
  • Knowledge of Quality Management system (ISO 9001, ISO 17025 and ANSI Z540)
  • Must have great interpersonal and customer service skills
  • Strong attention to details
  • Must be a self-motivator, work as a team player, and follow written procedures


Physical Demands

  • Must be able to lift up to 45 pounds without assistance
  • Occasional standing and bending are required


Working Environment

Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites

Travel may be required to other domestic and possibly international locations


What We Offer

  • Full - Time, non-exempt position
  • Excellent benefits package includes medical, dental, vision, disability, life insurance, 401(k) with company matching, employee funded pre-tax health and tuition reimbursement
  • Vacation, sick and paid holidays


SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation and training.

  • Calibration Specialist B

    3 weeks ago

    Santa Clara, United States SIMCO Electronics Full time

    Position Overview The Calibration Specialist B plays a critical role in ensuring the accuracy and precision of inspection, measurement, and test equipment across various disciplines including Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency. Leveraging expertise in measurement...

  • Calibration Technician C

    7 months ago

    Santa Clara, United States SIMCO Electronics Full time

    Position OverviewThe Calibration Technician C will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement...

  • Senior Calibration Technician

    3 weeks ago

    Santa Clara, California, United States Trescal Inc Full time

    Job OverviewTrescal Inc. is a leading provider of calibration, repair, and asset services, seeking an experienced Senior Level Calibration Technician to join our team in Santa Clara, CA.Estimated Salary: $120,000 - $180,000 per yearThis role offers a competitive compensation package, including paid time off, 401k plan, career development opportunities,...

  • Precision Calibration Specialist

    3 weeks ago

    Santa Clara, California, United States Simco Electronics Full time

    Job OverviewAt Simco Electronics, we are seeking a highly skilled Precision Calibration Specialist to join our team. This is a full-time, non-exempt position that offers an excellent benefits package and a competitive salary of $$83,000 - $105,000 per year, depending on experience.About the Role:The Precision Calibration Specialist will apply their knowledge...

  • High-Level Calibration Specialist

    2 weeks ago

    Santa Clara, California, United States Trescal Inc Full time

    Job OverviewTrescal Inc., a leading independent calibration, repair, and asset services provider in the U.S., is seeking an experienced Senior Level Calibration Technician to join our team in Santa Clara, CA.Estimated Salary: $120,000 - $150,000 per annumThis role offers a competitive compensation package, including benefits such as dental, vision, employee...

  • Calibration Specialist

    1 week ago

    Santa Ana, United States PCX Aerostructures, LLC Full time

    TitleCalibration Specialist About the OrganizationPCX Aerosystems is a premier supplier of flight-critical mechanical systems and structures to leading aerospace OEMs and the US Government. With roots going back to the dawn of the helicopter age, PCX today is a private equity owned acquisition platform tasked with building a defense-focused, balanced...

  • Sensor Calibration Expert

    20 hours ago

    Santa Ana, California, United States Kinetic Corporation Full time

    Our MissionKinetic Corporation aims to be the primary infrastructure-as-a-service for servicing future vehicles with our robotic repair centers, powered by our proprietary software and AI. We believe that technology can drive innovation and make a positive impact on society.Job DescriptionWe are looking for a talented Computer Vision Engineer to join our...

  • Calibration Systems Specialist

    6 days ago

    Santa Clarita, California, United States AllSTEM Connections Full time

    About the Role:We are seeking a highly skilled Calibration Systems Specialist to join our team at AllSTEM Connections. In this role, you will be instrumental in testing, developing, and optimizing powertrain systems.Key Responsibilities:Conduct engine calibration tests on dynos and perform in-depth engine data analysis.Carry out HIL/MIL testing and develop...

  • Yoh | Onsite Entry Semiconductor Engineering Technician CA

    2 weeks ago

    santa clara, United States Yoh Full time

    b>Onsite Entry Semiconductor Engineering Technician needed for an 18-month contract to hire opportunity with Yoh's client located in Santa Clara California. This is a 12 hour Day shift.  Pay Rate: $22-$26 per hourThe Big Picture Top Skills You Should Possess:  Solid interpersonal skillsStrong analytical skillsAbility to quickly adapt to change What You...

  • Anesthesia Technician Specialist

    5 days ago

    Santa Rosa, California, United States Kaiser Permanente Full time

    Job Title: Anesthesia Equipment TechnicianCompany Overview: Kaiser Permanente is a leading healthcare organization seeking an experienced Anesthesia Equipment Technician to join our team.Estimated Salary: $43,000 - $45,000 per yearKey Responsibilities:• Maintain and service electronic and mechanical equipment used by the Anesthesia Department personnel.•...

  • Anesthesia Technical Assistant

    4 weeks ago

    Santa Clara, United States Kaiser Permanente Full time

    Job Summary:Under direct supervision of the Anesthesiologist and Certified Registered Nurse Anesthetist (CRNA), sets up, troubleshoots, and provides general maintenance on all anesthesia equipment.Essential Responsibilities:On a daily basis and in accordance with department standards, maintains and services all electronic and mechanical equipment used by...

  • Semiconductor Equipment Technician

    5 days ago

    Santa Clara, California, United States Apex Electronics Talent Full time

    **Apex Electronics Talent**: We are seeking a skilled **Field Service Engineering Technician (PVD)** to join our team in Santa Clara, CA.The successful candidate will perform technical support of high vacuum equipment for PVD and related robotics, monitoring, inspecting, setting up, calibrating, and maintaining semiconductor process equipment in the field....

  • AllSTEM Connections | Calibration Engineer | santa monica, ca

    3 weeks ago

    santa monica, United States AllSTEM Connections Full time

    The Calibration Development Engineer will be instrumental in testing, developing, and optimizing powertrain systems. This role includes engine calibration on dynos, embedded strategy testing, data analysis, and providing trackside support for race teams to enhance vehicle performance.Key ResponsibilitiesConduct engine calibration tests on dynos and perform...

  • Regulatory Compliance Laboratory Manager

    2 weeks ago

    Santa Clara, California, United States Nesco Resource Full time

    Job Summary:A Senior Lab Supervisor position is available at Nesco Resource, overseeing the operations of research and development laboratories. The ideal candidate will ensure safety, compliance, and smooth operations within the team.Key Responsibilities:Process Development and Management: Develop or revise comprehensive documentation that meets...

  • ATE Technician

    2 months ago

    Santa Clara, United States Wipro Full time

    Responsibilities -ATE setup and Testing using the tester Advantest 93k V93000 advantest Verigy 93K 93000Experience with Smartest 8 preferredExecution and data collections for SOCs of packagesSupports engineering activities such as testing, program and hardware checkout utilizing ATE and SLT systemsOperating Thermostream for characterizationMinor tweak of...

  • Diesel Mechanic/Technician I

    3 weeks ago

    Santa Clara, California, United States Penske Truck Leasing Full time

    Vehicle Maintenance and Repair OpportunitiesPenske Truck Leasing is a leading transportation provider seeking an experienced Diesel Mechanic/Technician I to join our team in Santa Clara, CA.About the Role:We are looking for a skilled technician to perform routine maintenance and repairs on our fleet of vehicles. As a Diesel Mechanic/Technician I, you will be...

  • Truck Technician Lead

    3 weeks ago

    Santa Clara, United States Penske Truck Leasing Full time

    Penske Truck Leasing, a leading transportation solutions provider, seeks an experienced Truck Technician Lead to join their team in Santa Clara, CA. This exciting opportunity offers a competitive salary and excellent benefits package.About the JobThis is a challenging and rewarding role that requires strong technical skills and leadership abilities. As a...

  • High Voltage Maintenance Technician

    6 days ago

    Santa Clara, California, United States City of Santa Clara, CA Full time

    Job Title: High Voltage Maintenance TechnicianJob Summary: We are seeking a highly skilled High Voltage Maintenance Technician to join our team at the City of Santa Clara, CA. As a High Voltage Maintenance Technician, you will be responsible for maintaining and repairing high voltage substation equipment, power generation equipment, and industrial...

  • Anesthesia Equipment Specialist

    6 days ago

    Santa Clara, California, United States Kaiser Permanente Full time

    Job Overview:Kaiser Permanente seeks a skilled Anesthesia Equipment Specialist to join our team. As an integral part of our Anesthesia Department, this role is responsible for the maintenance, calibration, and troubleshooting of various anesthesia equipment.About the Role:This position requires a strong understanding of anesthesia equipment operation and...

  • Maintenance Technician

    18 hours ago

    Santa Clara, California, United States Hyatt Full time

    Job SummaryWe are seeking a skilled Maintenance Technician to join our team at Hyatt. In this role, you will be responsible for performing preventative maintenance tasks, minor plumbing work, pool maintenance, and other miscellaneous duties as directed.The estimated annual salary for this position is approximately $52,000 based on 2080 hours worked per year...