Manufacturing Engineer

4 days ago

Hudsonville, United States Steelcase Full time

Description

We are hiring  Associate to  Sr. Manufacturing Engineer to lead and provide ongoing support through our manufacturing life cycle

What You Will Be Doing:

With general direction, will lead the introduction of new products into the facility, improve productivity and profitability of existing production procedures, and provide ongoing support through the manufacturing life cycle. Acts as a technical expert in process technology

Improvements: Independently, with innovation and creativity, evaluates manufacturing processes to ensure optimal labor and material costs to increase productivity and profitability. Through justifications and evaluations, identifies prime areas for improvement. Tracks expenditures to ensure outlays are within budgeted amounts. Identifies, reduces, and eliminates worker exposure(s) to ergonomic stress(es) in the work place.

Floor Support : Provides timely product and process support for any manufacturing area to diagnose problems and implement solutions to minimize interruptions to production.

Special Projects : Leads the implementation of significant product, process, or other corporate change initiatives being introduced into the plant.

Strategic/Manufacturing Planning: Provides advanced research to introduce/integrate new processes, equipment, and technologies into the company

Your future team:  

You will be part of large and collaborative operations network at Steelcase.

Who You Are:

Preferred Skills and Competencies

  • Very strong analysis skills: process, capacity, cost/benefit, waste stream, and quality tools.
  • Internal and external quality support/management
  • Knowledge in lean manufacturing techniques: flow, PQ, equipment reliability, and set up reduction.
  • Facilitation and negotiation skills
  • Knowledge of material handling
  • Productivity improvement techniques: RCI’s
  • Behavior sciences (logic, sociology, etc.)
  • Economics and financial analysis
  • Work measurement
  • Interpersonal skills
  • Computer skills; advanced level required to utilize Excel and Access programs
  • Experience in design, specification, purchase, and installation of new equipment
  • Experience in the Engineering Design Process
  • Knowledge of simulation, process modeling, and value stream mapping
  • Project management and leadership ability
  • Occupational Bio Mechanics/Human Factors Engineering
  • Strategic planning

Required Skills and Competencies

  • 4 year technical degree or equivalent education 

Who We Are: 

Steelcase is a global design and thought leader in the world of work. Along with our expansive community of brands, we design and manufacture innovative furnishings and solutions to help people do their best work in the many places where work happens. 

Why People Choose to Work with Us:

At Steelcase, we put people at the center of everything we do. We understand the role of work and believe that it can bring meaning and purpose to the lives of our customers and our employees. We prioritize supporting our employees both in and out of work, in all aspects of their lives. When we bring our talents together, we make a positive lasting impact through our work and communities.

Our employees balance two key principles: 

We expect the office to be our primary place of work because that’s where we gather to learn, teach, innovate, and host our clients. Being present together builds communities of belonging, enables strong teams, and helps us make meaningful progress. 

We also believe in giving people choice and control – over how, when and where they work to achieve commitments and deliver results, along with their wellbeing and personal needs. We trust employees to orchestrate their time and presence to best accomplish work, and what that looks like may change from day to day. 

Levels of flexibility vary by role and team, and employees and their leader need to align on expectations of flexibility. Together we can help the world work better. 

  What Matters to Us: 

More than qualifications, we’re looking for talent and potential. We are proud to have a diverse and inclusive workforce, and we're always looking to improve our global community. We value applicants who are comfortable interacting with people different from themselves, building mutual respect and positive relationships. We invite people from all backgrounds and genders to apply. If we can make the application process easier through accommodation, please email us at

Steelcase provides employment opportunities to all qualified employees and applicants without regard to race, color, creed, genetic information, religion, national origin, gender, sexual orientation, gender identity and expression, age, disability, or veteran status and bases all employment decisions only on valid job requirements. We are proud to be recognized for our inclusive workforce by the Corporate Equality Index for the past nine years.

We are an MVAA silver level employer. Veterans and Veteran Spouses are encouraged to apply. 

If you’re interested in Steelcase, but this isn’t the right time or role, join our Talent Community to be updated on future openings in your area(s) of expertise.

  • Manufacturing Process Lead

    7 hours ago

    Hudsonville, Michigan, United States Steelcase Full time

    Job SummaryWe are seeking a highly skilled Manufacturing Engineer to lead and support our manufacturing operations. As a key member of our team, you will be responsible for introducing new products, improving productivity and profitability, and providing technical expertise in process technology.Key Responsibilities:Lead the introduction of new products into...

  • Manufacturing Process Technician I- 2nd Shift

    4 months ago

    Hudsonville, United States SoundOff Signal Full time

    Job DescriptionJob DescriptionDescription:General Position OverviewSupport the following Directives: Team Purpose: Continuously Influence Manufacturing Design and Processes Team Vision: Build and Ship the Part the Day the Part is OrderedSupport the Five Pillars of Manufacturing Engineering: Root Cause Analysis/Production Support Advanced Manufacturing...

  • Engineering Change Specialist

    3 weeks ago

    Hudsonville, United States SoundOff Signal Full time

    Job DescriptionJob DescriptionDescription:General Position OverviewThe Engineering Change Specialist is responsible for managing the process of engineering changes, ensuring that all modifications to products, parts, and processes are properly documented, reviewed, and implemented. This role involves working closely with cross-functional teams including...

  • PCB Design Engineer- Technical Expert

    2 months ago

    Hudsonville, United States SoundOff Signal Full time

    Job DescriptionJob DescriptionDescription:The PCB Design Engineer works with a multi-discipline team of engineers to design high quality printed circuit boards in accordance with engineering, customer and company requirements and processes.Reports to Electrical Engineering Manager.Contributes design recommendations, performs design reviews, and provides...

  • Junior Mechanical Engineer

    3 weeks ago

    Hudsonville, Michigan, United States SoundOff Signal Full time

    Position Overview:As a Junior Mechanical Engineer, you will engage in routine engineering tasks that are essential for daily operations. Your responsibilities will include performing detailed engineering assignments, calculations, and standardized testing procedures.Guidance and Decision-Making:You will receive direction on specific project objectives and...

  • Mechanical Engineering Technical Expert

    1 month ago

    Hudsonville, United States SoundOff Signal Full time

    Job DescriptionJob DescriptionDescription:Work is complex and difficult and requires Program / Project Management skills. Functioning as a highly competent engineer, work requires independent evaluation, selection and adaptation of standard company procedures, and translation of technical guidance from higher level personnel into data applicable to the...

  • Electrical Engineer II

    4 months ago

    Hudsonville, United States ESPEC North America Inc Full time

    Job DescriptionJob DescriptionDescription:Who we areESPEC North America (ENA) is a partner in environmental and accelerated reliability test chambers and solutions with a long history and deep expertise in making the world a better place through better quality, higher reliability products.MissionWe continually aim to grow and evolve by building mutually...

  • Firmware Engineer III

    3 months ago

    Hudsonville, United States SoundOff Signal Full time

    Job DescriptionJob DescriptionDescription:Responsible for all aspects of the software development process including specifications, design, implementation, optimization, testing and documentation. Responsibilities also include system controls, system infrastructure, applications and full aspects of system integrationDemonstrates SoundOff Signal’s Core...

  • SMT Process Technician I- 2nd Shift

    3 months ago

    Hudsonville, United States SoundOff Signal Full time

    Job DescriptionJob DescriptionDescription:General Position OverviewSupport the following Directives: Team Purpose: Continuously Influence Manufacturing Design and Processes Team Vision: Build and Ship the Part the Day the Part is OrderedSupport the Five Pillars of Manufacturing Engineering: Root Cause Analysis/Production Support Advanced Manufacturing...

  • Embedded Software Test Engineer III

    2 weeks ago

    Hudsonville, United States SoundOff Signal Full time

    Job DescriptionJob DescriptionDescription:General Position OverviewThis position requires a self-directed, driven individual who enjoys investigating and testing embedded software for robust quality of operation.Essential Job FunctionsDemonstrates SoundOff Signal’s Core Values in daily interactions with internal and external customers.Develop test cases...

  • Control Systems Engineer Senior

    4 months ago

    Hudsonville, United States APEX Controls, LLC Full time

    Job DescriptionJob DescriptionDescription:SENIOR CONTROLS SYSTEMS ENGINEER JOB DESCRIPTIONAbout Apex Controls Inc.Our mission is to be recognized as a great place to work and one of the best automation and control panel providers. We partner with businesses to improve their manufacturing process through automation, enabling our customers to be market leaders...

  • Account Manager

    4 weeks ago

    Hudsonville, United States Altron Automation Full time

    JOB SUMMARY:Account Managers are responsible for technical sales and marketing functions needed to support service and new tool sales. They are also responsible for insuring constant communication between all associated departments and delivery of service and new tool sales that will be profitable to Altron Automation.JOB DUTIES AND RESPONSIBILITIES:Meet...

  • CNC Machining Specialist

    2 weeks ago

    Hudsonville, Michigan, United States Intex Technologies, LLC Full time

    Job OverviewPosition Summary: The CNC Machining Specialist is responsible for operating and programming CNC machinery to produce precision components. This role requires a strong understanding of machining processes and the ability to work independently to solve complex problems.Key Responsibilities:Interpret blueprints, samples, and work orders to set up...

  • CNC Operations Supervisor

    3 weeks ago

    Hudsonville, Michigan, United States Axios Professional Recruitment Full time

    Axios Professional Recruitment is collaborating with a manufacturing firm seeking to hire a CNC Operations Supervisor. The ideal candidate will possess a robust background in leading teams, training CNC Operators, and developing production programs while working closely with various departments to ensure efficient scheduling and output.Benefits for the CNC...

  • CNC Operations Supervisor

    3 weeks ago

    Hudsonville, Michigan, United States Axios Professional Recruitment Full time

    Axios Professional Recruitment is collaborating with a manufacturing organization seeking to hire a CNC Operations Supervisor. The ideal candidate will possess substantial experience in overseeing teams, particularly in the training and onboarding of CNC Operators, as well as in reading, interpreting, and developing programs for production. This role...

  • CNC Manager

    1 month ago

    Hudsonville, United States Axios Professional Recruitment Full time

    Axios Professional Recruitment is partnered with a manufacturing company in Hudsonville, MI who is looking to direct hire a CNC Manager. This candidate must have experience managing teams with training and onboarding of CNC Operators, reading, interpreting, and writing programs for production, and collaborating in cross functional teams for scheduling and...

  • CNC Manager

    4 months ago

    Hudsonville, United States Axios Professional Recruitment Full time

    Job DescriptionJob DescriptionAxios Professional Recruitment is partnered with a manufacturing company in Hudsonville, MI who is looking to direct hire a CNC Manager. This candidate must have experience managing teams with training and onboarding of CNC Operators, reading, interpreting, and writing programs for production, and collaborating in cross...

  • Program Manager

    2 months ago

    Hudsonville, United States SoundOff Signal Full time

    Job DescriptionJob DescriptionDescription:Demonstrates SoundOff Signal’s Core Values in daily interactions with internal and external customers.Responsibilities include leading all aspects of the program, from program award until six months after start of production. The Program Manager is principally responsible for the achievement of program Quality,...

  • Validation Lab Manager

    2 months ago

    Hudsonville, United States SoundOff Signal Full time

    Job DescriptionJob DescriptionDescription:Responsible for leading a team dedicated to ensuring that our products are tested to meet regulatory and industry standards. This pivotal role requires meticulous attention to detail, a deep understanding of certification processes, and exceptional leadership skills to guide the validation team effectively. You will...

  • Facilities Project Manager

    2 months ago

    Hudsonville, United States Haworth, Inc. Full time

    Company Overview When you feel connected to your work, you feel more engaged. At Haworth, you can pursue a career that offers you ample opportunity to build your portfolio and expand your skillset in an exciting and inclusive environment. Join a company that values innovation, inspiration, and you! HAWORTH is a global leader in office furniture and...