Compressor Development Engineer IV

7 months ago

Plymouth, United States Daikin Applied Full time

Job Description

Qualifications:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 

Education/Experience:

Bachelor's degree (Mechanical or Equivalent) 7+ years of related experience (Higher level degree can be substituted for years of experience). Requires experience with turbomachinery preferably centrifugal compressors. Requires experience in common manufacturing capabilities and materials Requires solid fundamental understanding of mechanical engineering principles with focus on stress analysis, mechanics of materials, vibration, fatigue, and failure modes. Requires knowledge of centrifugal compressor component design such as gears, bearings, rotating equipment, motors, casting and machining parts. Experience in product testing and data acquisition, with emphasis on compressor performance validation. Strong team player with focus on team goals, team objectives, and team deadlines. Basic skills with CAD applications.

  Preferred Requirements:

Familiarity with global HVAC principles and practices and Mechanical component design standards (ASHRAE, GB, ISO, etc). Basic knowledge of test data analysis software and tools. Ability to work in dynamic environment, communicating effectively, clearly, and logically Ability to read, analyzes, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Ability to support the development of highly variable products that can be dynamically configured at the time of order using rules-based engineering tools.

Essential Duties and Responsibilities include the following. Other duties may be assigned.

Creates and implements planning for compressor development including: Design and Review milestones Detailed and advanced centrifugal compressor design from each mechanical components to electrical components used in compressors. This includes the complete centrifugal compressor material selection, gear design, bearing design, housing design, rotor dynamic analysis of both single and multi-stage compressors. Evaluates all mechanical aspects to ensure the product designed and developed will meet life cycle requirements. This will include detail stress, vibration, modal, fatigue analysis of all designed components. Detailed involvement in all steps in the product development process/life cycle, from customer requirement, to design, to prototype manufacturing, to product qualification, to final product implementation and product launch. Derive component level requirements from assembly requirements to create part specifications and drawings: Communication with all suppliers and vendors to determine manufacturability. Participate in inspection results to ensure all designed parts are manufactured as specified, within specified tolerances Communicate and instruct designer to create specifications and check part drawings. Apply common manufacturing and inspection capabilities to choose materials and tolerances. Relevant experience with specifying tight tolerances and GD&T. Create robust design using DFMEA method during design, analysis and testing. Create pass/fail criteria of analysis and test results by applying reason and logic to fundamental mechanics. Use simulation tools to simulate design performance and reliability to support DFMEA Plan and develop test programs for prototypes using Design of Experiments as needed for complex problems with many variables Communicate and instruct lab technician to setup test and gather data to meet the test parameters and accuracy requirements. Analyze test data and reports, making clear conclusion if designs meet functional, performance, and safety specifications. Develops parts qualification process/procedure and makes decisions pass/fail from developed criteria. In depth involvement in all aspects of the test phase to validate design. Provides detailed analysis based on the mathematical, finite element analysis and experimental data. Provides accurate and precise product performance results for marketing and sales for product selection. Collaboration and communication with other teams in the product development process/projects to ensure final product meets all objectives and customer requirements in all product areas. Provides documentation, both high level, and detailed documentation, for all projects and tasks throughout the development process.

  • Compressor Development Engineer IV

    3 weeks ago

    Plymouth, United States Daikin Applied Full time

    Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work visa sponsorship...

  • Compressor Development Engineer II

    3 weeks ago

    Plymouth, United States Daikin Applied Full time

    Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work visa sponsorship...

  • Lead Mechanical Engineer for Automotive Compressor Development

    3 weeks ago

    Plymouth, Michigan, United States Sanden International Full time

    Job Type: Full-timeAbout the JobPurpose of this Position:This role is responsible for developing products in compliance with Sanden and customer requirements.This position will include compressor concept development, design, testing, and reporting with engineering theory/logic.This position will also include training for other engineers and staff.Other...

  • Mechanical Engineer

    3 weeks ago

    Plymouth, United States Lorven Technologies Full time

    Our client is looking Mechanical Engineer for Fulltime project in Plymouth, Minnesota (Onsite) Below is the detail requirement. Role: Mechanical Engineer Location: Plymouth, Minnesota (Onsite) HVAC Compressor design experience must. Responsibilities: Bs degree in mechanical with 5+ years' experience in compressor design development Onsite coordinator for...

  • Sr Mechanical Engineer

    3 weeks ago

    Plymouth, United States Sanden International Full time

    Job Type Full-time Description Purpose of this Job: This job is responsible for developing products in compliance with Sanden and customer requirements. This role will include compressor concept development, design, testing, and reporting with engineering theory/logic. This role will also include training for other engineers and staff. Other...

  • Electrical Engineer IV

    2 weeks ago

    Plymouth, United States Daikin Applied Full time

    Principal Electrical Engineer - Plymouth, MN or Staunton, VA - Onsite Make your mark at the world's largest HVAC company Daikin Applied is seeking a Principal Electrical Engineer lV (Power Electronics and Motors) who will support the design and application of power electronics including VFDs, transformers, power quality filters, and motors. This role will...

  • Senior Development Engineer

    2 weeks ago

    Plymouth, United States MAHLE Powertrain Full time

    MAHLE is not currently hiring individuals for this position who now or in the future require sponsorship for employment based non-immigrant and immigrant visas. However, as a global company, MAHLE offers many job opportunities outside of the U.S. which can be found through our employment website www.jobs.mahle.com SUMMARY * Lead engine performance and...

  • Sr. Development Engineer

    3 weeks ago

    Plymouth, United States Daikin Applied Full time

    Make your mark at the world's largest HVAC company Daikin Applied is seeking a Sr. Development Engineer. The Sr. Development Engineer will lead the development of primary systems and sub-systems of commercial HVAC equipment. The candidate will collaborate with cross-functional team members, driving toward releasing innovative HVAC products. The candidate...

  • Senior Development Engineer

    6 days ago

    Plymouth, United States Mahle Inc. Full time

    MAHLE is not currently hiring individuals for this position who now or in the future require sponsorship for employment based non-immigrant and immigrant visas. However, as a global company, MAHLE offers many job opportunities outside of the U.S. which can be found through our employment website www.jobs.mahle.com SUMMARY Lead engine performance and...

  • Development Engineer III

    3 weeks ago

    Plymouth, United States Daikin Applied Full time

    Make your mark at the world's largest HVAC company Daikin Applied is seeking a Development Engineer III. The Development Engineer III will lead the development of primary systems and sub-systems of commercial HVAC equipment. The candidate will collaborate with cross-functional team members, driving towards releasing innovative HVAC products. The candidate...

  • Senior Development Engineer

    6 months ago

    Plymouth, United States MAHLE Full time

    SUMMARY Lead engine performance and emissions development projects involving gasoline and diesel engine testing on an engine dynamometer test bed. ESSENTIAL DUTIES AND RESPONSIBILITIES Lead, plan and execute engine performance and emissions development and durability programs. Conducting a detailed thermodynamic analysis of engine...

  • Product Development Engineer

    21 hours ago

    Plymouth, Wisconsin, United States Foam Fabricators Inc Full time

    About UsFoam Fabricators Inc. is a leading manufacturer of custom foam solutions. We are committed to delivering high-quality products and exceptional customer service.About the RoleWe are seeking a Product Development Engineer to join our team. This role will involve creating technical drawings and plans for new products, improving, or modifying existing...

  • Senior Development Engineer MI

    1 month ago

    Plymouth, United States MAHLE, Inc Full time

    MAHLE is not currently hiring individuals for this position who now or in the future require sponsorship for employment based non-immigrant and immigrant visas. However, as a global company, MAHLE offers many job opportunities outside of the U.S. which can be found through our employment website www.jobs.mahle.comSUMMARYLead engine performance and emissions...

  • Senior Development Engineer MI

    4 weeks ago

    plymouth, United States MAHLE, Inc Full time

    MAHLE is not currently hiring individuals for this position who now or in the future require sponsorship for employment based non-immigrant and immigrant visas. However, as a global company, MAHLE offers many job opportunities outside of the U.S. which can be found through our employment website www.jobs.mahle.comSUMMARYLead engine performance and emissions...

  • Senior Development Engineer MI

    4 weeks ago

    plymouth, United States MAHLE, Inc Full time

    MAHLE is not currently hiring individuals for this position who now or in the future require sponsorship for employment based non-immigrant and immigrant visas. However, as a global company, MAHLE offers many job opportunities outside of the U.S. which can be found through our employment website www.jobs.mahle.comSUMMARYLead engine performance and emissions...

  • Senior Development Engineer MI

    1 month ago

    plymouth, United States MAHLE, Inc Full time

    MAHLE is not currently hiring individuals for this position who now or in the future require sponsorship for employment based non-immigrant and immigrant visas. However, as a global company, MAHLE offers many job opportunities outside of the U.S. which can be found through our employment website www.jobs.mahle.comSUMMARYLead engine performance and emissions...

  • MFG Development Engineer II

    3 weeks ago

    Plymouth, United States Turck Inc. Full time

    Shape the Future of Manufacturing Excellence Are you passionate about optimizing manufacturing processes and driving innovation? Do you thrive in a collaborative environment where your expertise directly impacts product quality and efficiency? We're seeking a talented Manufacturing Development Engineer II to join our dynamic team and help shape the future of...

  • Electrical Systems Development Engineer

    3 weeks ago

    Plymouth, Michigan, United States Loc Performance Full time

    About UsLoc Performance, a leading provider of complex mechanical products and services, is committed to delivering quality solutions at affordable prices. With a lean organizational structure and four facilities spanning over 1.7 million square feet, we offer a wide range of services including design, prototype manufacturing, testing, production launch, and...

  • Product Development Engineer II

    2 days ago

    Plymouth, United States Integer Full time

    By living according to a common set of values, we create a culture that unifies, embraces the uniqueness we all bring to the company, and positions Integer for long-term success. At Integer, our values are embedded in everything we do. Customer We focus on our customers' success Innovation We create better solutions Collaboration We create success together...

  • Project Coordinator IV

    3 weeks ago

    Plymouth, United States Medtronic Full time

    Applies knowledge of and experience in company operations to assist in the development, implementation and administration of program/system guidelines and procedures. - Provides project or program support to the MDR, Released Product Engineering and Project Coordinator, Coordinator, Manufacturing, Management, Support, Program