BAS Control Technician I

Found in: Talent US C2 - 1 week ago

Durham, United States Versar Full time

The (BAS) Building Automation System Control Technician I will routinely assess, read, and adjust i/net calculations on the BAS system. This position operates and manipulates facility systems without detriment to facility or safety from the BAS system, while routinely conducting troubleshooting of in-field BAS related components.

This is a union contract position which requires on-site presence at the EPA (Environmental Protection Agency) facility at Research Triangle Park (RTP) in Raleigh-Durham, North Carolina.

Responsibilities

Accesses BAS front-end graphic pages and system alarms to actively monitor and control temperature, humidity, air pressurization, differential pressure, VFD (Variable Frequency Drive) percentage, flow rate, damper and valve positions, occupancy points, and water level alarms, etc., to include but not be limited to only these activities. Edits BAS graphic pages to accurately reflect facility updates, system changes, and alterations. Adjust critical equipment set points and create and assign alarm messages to the set points. BAS I Technicians add critical equipment monitoring/set points to the BAS II as directed. Troubleshoots, installs, replaces, and repairs BAS sub-LAN controller hardware and equipment.  Provides requested information via screenshots, copying data, saving files etc. Performs annual inspections, calibrations, and repair procedures as necessary for BAS field devices. Inspects BAS related UPS (Uninterrupted Power Supply) devices for proper operation, reports deficiencies to appropriate personnel for repair. Independently calibrate controls on components of the automation system and perform test and balance procedures on the ventilation system.  Installs new BAS components and develops programs for their proper operation on I/net, continuum, Distech, and StruxureWare BAS systems.  Independently troubleshoots, repairs, and/or replaces BAS field components to return BAS system to normal operation.  Performs all other duties as required.

Requirements

2+ years’ experience in installation, programming, and troubleshooting of Building Automation Control Systems (BAS) Possess own position-related hand tools for use on job site. 18+ years of age or older High School Diploma or equivalent Must be able to read, write, and speak English fluently.  Must have transportation to and from Company office.  Possess and maintain a valid North Carolina Driver’s License Be able to lift fifty to sixty pounds (50 - 60 lbs.) Be able to work overtime, nights, and weekends as scheduled.  Successful results of pre-employment screenings, including federal background check, MVR, and drug screen  Ability to obtain facility/site security and access credentials. Be able to work alternate shifts, overtime, nights, and weekends as scheduled or as needed. Comply with company drug and alcohol policy.  Be authorized to work in the US or will be authorized by the successful candidate’s start date. 

Preferred Qualifications

Related technical certifications or licenses. Familiarity with I/net, continuum, Distech, and/or StruxureWare (BAS) Building Automation Systems or infrastructure management programs and software

  • Controls Engineer

    1 week ago

    Durham, United States CareerBuilder Full time

    Controls hardware designer/engineer to join our Robotics Division team. Were a fast paced, customer focused organization that has a history of making things happen and providing high quality automation systems to the industry. Responsibilities: Under limited direction, provide electrical engineering solutions for complete control system design to include...

  • CNC Machine Repair Technician III

    Found in: beBee jobs US - 2 weeks ago

    Durham, North Carolina, United States Amentum Full time

    Amentum is seeking an CNC Machine Repair Technician at the subject matter expert level to join our Facilities - Operations and Maintenance team based in Durham, NC. This is for our 2nd shift ( Monday-Friday, 2:30 pm to 11:00 p.m. EST)Maintains, improves, and troubleshoots, Machine Tools, Automated and CNC Machines with PLC and distributed I/O control systems...

  • Surgical Technician I

    2 weeks ago

    Durham, United States WakeMed Full time

    Job DescriptionAbout WakeMed:Serving the community since 1961, WakeMed Health & Hospitals is the leading provider of health services in Wake County. With a mission to improve the health and well-being of our community, we are committed to providing outstanding and compassionate care. For more information, visit www.wakemed.org.EOEPosition Information:The...

  • Surgical Technician I

    2 weeks ago

    Durham, United States WakeMed Full time

    Job DescriptionAbout WakeMed:Serving the community since 1961, WakeMed Health & Hospitals is the leading provider of health services in Wake County. With a mission to improve the health and well-being of our community, we are committed to providing outstanding and compassionate care. For more information, visit EOEPosition Information:The Surgical Technician...

  • CNC Machine Repair Technician III

    Found in: beBee S US - 1 week ago

    Durham, United States Amentum Full time

    Amentum is seeking an CNC Machine Repair Technician at the subject matter expert level to join our Facilities - Operations and Maintenance team based in Durham, NC. This is for our 2nd shift ( Monday-Friday, 2:30 pm to 11:00 p.m. EST)Maintains, improves, and troubleshoots, Machine Tools, Automated and CNC Machines with PLC and distributed I/O control systems...

  • Surgical Technician I

    Found in: CMP US C2 - 4 days ago

    Durham, United States WakeMed Full time

    About WakeMed:Serving the community since 1961, WakeMed Health & Hospitals is the leading provider of health services in Wake County. With a mission to improve the health and well-being of our community, we are committed to providing outstanding and compassionate care. For more information, visit www.wakemed.org.EOEPosition Information:The Surgical...

  • Utilities Technician

    1 week ago

    Durham, United States Insight Global Full time

    Must Haves: Experience with a variety of commercial or industrial utility equipment such as boilers, chillers, air compressors, freezers etc. Experience working with a building automation system (BAS) similar to Siemens, Honeywell, JCI etc. Experience with a work order management system like SAP, Maximo, Blue Mountain or something similar Industrial...

  • Utilities Technician

    Found in: Appcast US C2 - 1 week ago

    Durham, United States Insight Global Full time

    Must Haves: Experience with a variety of commercial or industrial utility equipment such as boilers, chillers, air compressors, freezers etc. Experience working with a building automation system (BAS) similar to Siemens, Honeywell, JCI etc. Experience with a work order management system like SAP, Maximo, Blue Mountain or something similar Industrial...

  • Utilities Technician

    Found in: Appcast Linkedin GBL C2 - 2 weeks ago

    Durham, United States Insight Global Full time

    Must Haves: Experience with a variety of commercial or industrial utility equipment such as boilers, chillers, air compressors, freezers etc. Experience working with a building automation system (BAS) similar to Siemens, Honeywell, JCI etc. Experience with a work order management system like SAP, Maximo, Blue Mountain or something similar Industrial...

  • Sr Engineer I, Automation

    7 days ago

    Durham, United States Biogen Full time

    About This Role. The Sr. Engineer I, Automation provides 24/7 process controls/automation technical site support to the Biogen 900 Davis drive, NC manufacturing site. In addition, this role manages multiple small OPEX/ CAPEX projects and continuous i Automation, Continuous Improvement, Engineer, Process Control, Process Engineer, Technical Support,...

  • Auto Body Technician

    Found in: Lensa US P 2 C2 - 2 weeks ago

    Durham, United States Caliber Collision Centers Full time

    Service CenterDurham - NorthwestJOB SUMMARYCaliber Collision has an immediate job opening for an Auto Body Technician who will safely repair vehicles in accordance with Caliber and OEM standards using our state-of-the-art equipment. Repairs may include, but are not limited to removing damaged fenders, panels, and grills, and reassembling the vehicle parts...

  • Auto Body Technician

    Found in: Talent US C2 - 1 week ago

    Durham, United States Caliber Collision Full time

    Service Center Durham - Northwest JOB SUMMARY Caliber Collision has an immediate job opening for an Auto Body Technician who will safely repair vehicles in accordance with Caliber and OEM standards using our state-of-the-art equipment. Repairs may include, but are not limited to removing damaged fenders, panels, and grills, and reassembling the...

  • Auto Body Technician

    Found in: Talent US C2 - 7 days ago

    Durham, United States Caliber Collision Full time

    Service Center Durham - Fay St JOB SUMMARY Caliber Collision has an immediate job opening for an Auto Body Technician who will safely repair vehicles in accordance with Caliber and OEM standards using our state-of-the-art equipment. Repairs may include, but are not limited to removing damaged fenders, panels, and grills, and reassembling the...

  • Installation Technician

    1 week ago

    Durham, United States A2Z Innovative Technologies Full time

    Job DescriptionJob DescriptionWe are seeking a few Installation Technicians, both entry level and experienced to become a part of our team! You will assist with the installation and service of various low voltage systems and equipment, including but not limited to security, fire, and access control.Responsibilities:Service and Install security, fire, access...

  • Collision Repair Technician

    1 week ago

    Durham, United States Collision Specialists Full time

    Collision Repair TechnicianBenefits:CSI is NOT a big corporate shop, and we are seeking those that value this. CSI co-owners work daily at the shop to foster a family feeling work environment, professionalism, integrity, real, and a genuine worthy team effort, while keeping the selfish/complaining types out of the CSI family.We’ve heard plenty of repair...

  • Part-Time Maintenance Technician

    1 week ago

    Durham, United States Thalhimer Full time

    Job DescriptionJob DescriptionCushman & Wakefield | Thalhimer at Stonewood Apartments in Durham, NC is seeking to hire a Part-time Maintenance Technician to oversee maintenance in an effective and timely manner. If this sounds like the opportunity for you, apply today!ABOUT CUSHMAN & WAKEFIELD | THALHIMERExperience and knowledge have made the...

  • Accounting Technician

    Found in: beBee jobs US - 2 weeks ago

    Durham, North Carolina, United States Department Of Veterans Affairs Full time

    Summary This position is located in the Department of Veterans Affairs (VA), Veterans Health Administration (VHA), Mid-Atlantic Health Care Network (VISN 6), Durham VA Medical Center (VAMC), in Fiscal Service. This Position is responsible for a variety of accounting, agent cashier, travel and payroll support functions. Classifies, processes and performs...

  • Test Technician

    Found in: Talent US C2 - 1 week ago

    Durham, United States PEAK Technical Staffing Full time

    J OB FUNCTION: As a Test Operator, your main responsibility will be to make sure products meet quality standards and function properly. To meet quality standards, you will monitor, assemble, improve, and manipulate a product to ensure it is in no way defective. You will utilize our equipment and test procedures while testing our products. Collaboration with...

  • 2nd/3rd Shift Medication Technician

    1 week ago

    Durham, United States Calyx Living Full time

    Job DescriptionJob DescriptionCalyx Living is actively seeking 2nd/3rd Shift Medication Technicians (Med Techs) for our assisted living community located in beautiful North Durham off the Eno River and just minutes from Duke University, the Durham Bulls Athletic Park and the American Tobacco Campus in downtown Durham's vibrant entertainment district. As...

  • Calibration Technician

    Found in: Appcast US C2 - 1 week ago

    Durham, United States Insight Global Full time

    Required Experience:2+ years of experience working with GMP manufacturing/processes 5+ years of experience with Calibrations Experience with a work order management system similar to SAP, Blue Mountain, Maximo, ProCal, Must be able to successfully pass and maintain aseptic gowning qualification. Aseptic gowning requires that all skin and hair be covered...