NC/CNC Setup Specialist

2 weeks ago

Syracuse, New York, United States Health Talent Pro Full time
Job Summary

We are seeking a highly skilled NC/CNC Setup Specialist to join our team at Health Talent Pro. As a key member of our manufacturing team, you will be responsible for planning and performing a wide range of setups and machining operations on various machine shop equipment.

Key Responsibilities
  • Plan and execute setups and machining operations on engine lathe, vertical turret lathe, radial drill press, spindle drill press, shaper, surface grinder, horizontal and vertical milling machines.
  • Select and use necessary machine attachments, tools, feeds, and speeds according to material and finish requirements.
  • Square up and layout production runs or special castings for machining operations to achieve close tolerances.
  • Work with a variety of metals, including steel, iron, brass, bronze, and aluminum.
  • Design, machine, fit, and assemble jigs and fixtures to facilitate work.
  • Determine operation sequences, make computations for use of dividing head, angles, tapers, fits, and assembly.
  • Inspect parts for adequate finish allowance, defective material, or faulty operation.
  • Maintain equipment, machines, and work area in a clean, safe, and orderly condition in compliance with 5S processes.
Requirements
  • Minimum of two (2) years of previous work experience in machine setup and operation.
  • No relocation benefit is being offered for this position. Only candidates within a 50-mile radius of Syracuse, NY, will be considered. Active-Duty Military Service member candidates are exempt from the geographical area limitation.
Preferred Qualifications
  • Minimum of three (3) years of previous work experience in NC/CNC setup and operation.
Skills and Certifications
  • Machine setup in manufacturing.
  • Located within 50 miles of Syracuse plant.

  • NC/CNC Setup Specialist

    2 weeks ago

    Syracuse, New York, United States Resiliency LLC Full time

    Job SummaryWe are seeking a highly skilled NC/CNC Setup Specialist to join our team at Resiliency LLC. As a key member of our manufacturing team, you will be responsible for planning and performing a wide range of setups and machining operations on various machine shop equipment.Key Responsibilities:Plan and perform setups and machining operations on engine...

  • NC/CNC Setup Specialist

    6 days ago

    Syracuse, New York, United States Eaton Full time

    Job Title: NC/CNC Setup & Operate - 3rd ShiftEaton's ES GEIS CHD division is currently seeking a skilled NC/CNC Setup & Operate professional to join our team on a 3rd shift schedule. The core hours are 10:30 pm to 6:30 am, with a competitive hourly rate of $23.99.Please note that the salary information provided is a general guideline only. Salaries are based...

  • CNC Machinist Setup Specialist

    1 month ago

    Syracuse, New York, United States Staffworks CNY Full time

    Job SummaryStaffworks CNY is seeking a skilled CNC Machinist Setup Specialist to join our team. As a CNC Machinist Setup Specialist, you will be responsible for setting up and operating one or more of a variety of CNC Machines.Key Responsibilities:Set up and operate CNC Machines, ensuring accurate and efficient production.Troubleshoot CNC issues related to...

  • CNC Machine Operator

    2 weeks ago

    Syracuse, New York, United States A Company in Syracuse, NY Full time

    Job SummaryA Company in Syracuse, NY is seeking a skilled CNC & NC Machine Setup & Operate P&R professional to join our team. As a key member of our production team, you will be responsible for setting up and operating NC and CNC machines to produce high-quality explosion-proof parts.Key Responsibilities:Setup and operate NC and CNC machines to perform...

  • CNC Machine Operator

    2 weeks ago

    Syracuse, New York, United States Health Talent Pro Full time

    Job SummaryWe are seeking a skilled CNC Machine Operator to join our team at Health Talent Pro. As a CNC Machine Operator, you will be responsible for setting up and operating NC and CNC machines, as well as conventional machines, to perform various machining operations.Key ResponsibilitiesSet up and operate NC and CNC machines to perform machining...

  • CNC Machine Operator

    2 weeks ago

    Syracuse, New York, United States Resiliency LLC Full time

    Job SummaryWe are seeking a highly skilled CNC Machine Operator to join our team at Resiliency LLC. As a CNC Machine Operator, you will be responsible for setting up and operating NC and CNC machines to perform various turning, drilling, tapping, and milling operations.Key ResponsibilitiesSetup and operate NC and CNC machines to produce explosion-proof parts...

  • CNC Machine Operator

    1 week ago

    Syracuse, New York, United States Eaton Full time

    Job Title: CNC & NC Machine Setup & Operate P&REaton's ES GEIS CHD division is seeking a skilled CNC & NC Machine Setup & Operate P&R professional to join our team. The core hours for this position are 6:00 am to 2:30 pm, and the hourly rate is $23.99 per hour.Please note that the salary information provided is a general guideline only. Salaries are based on...

  • CNC Machine Operator

    5 days ago

    Syracuse, New York, United States Health Talent Pro Full time

    Job SummaryWe are seeking a skilled CNC Machine Operator to join our team at Health Talent Pro. As a CNC Machine Operator, you will be responsible for setting up and operating NC and CNC machines, as well as conventional machines, to perform various machining operations.Key ResponsibilitiesSet up and operate NC and CNC machines, including single spindle and...

  • CNC Machine Operator

    4 weeks ago

    Syracuse, New York, United States Health Talent Pro Full time

    Job SummaryWe are seeking a highly skilled CNC Machine Operator to join our team at Health Talent Pro. As a CNC Machine Operator, you will be responsible for setting up and operating NC and CNC machines, as well as conventional machines, to perform various machining operations.Key ResponsibilitiesMachining Operations: Set up and operate NC and CNC machines,...

  • CNC Machine Operator

    1 week ago

    Syracuse, New York, United States Eaton Full time

    CNC & NC Machine Setup & Operate P&R Job DescriptionEaton's ES GEIS CHD division is seeking a skilled CNC & NC Machine Setup & Operate P&R professional to join our team. The core hours for this position are 6:00 am to 2:30 pm, with an hourly rate of $23.99 per hour.Please note that the salary information provided is a general guideline only, and salaries are...

  • CNC Machine Operator

    1 week ago

    Syracuse, New York, United States Eaton Full time

    CNC & NC Machine Setup & Operate P&R Job DescriptionEaton's ES GEIS CHD division is seeking a skilled CNC & NC Machine Setup & Operate P&R professional to join our team. The core hours for this position are 6:00 am to 2:30 pm, and the hourly rate is $23.99 per hour.Please note that the salary information provided is a general guideline only. Salaries are...

  • CNC Machine Operator

    4 weeks ago

    Syracuse, New York, United States A Company in Syracuse, NY Full time

    Job SummaryA Company in Syracuse, NY is seeking a skilled CNC Machine Operator to join our team. The ideal candidate will have experience in setting up and operating NC and CNC machines, as well as conventional machines in a manufacturing environment.Key Responsibilities:Set up and operate NC and CNC machines to perform various turning, drilling, tapping,...

  • CNC Machinist Specialist

    2 weeks ago

    Syracuse, New York, United States Belcan Full time

    Job SummaryWe are seeking a highly skilled CNC Machinist to join our team at Belcan. As a CNC Machinist, you will be responsible for setting up and operating CNC machines to produce high-quality parts and products.Key ResponsibilitiesSetup and operate CNC machines to produce parts and productsPerform turning, drilling, boring, reaming, threading, tapping,...

  • CNC Machinist Specialist

    2 days ago

    Syracuse, New York, United States Belcan Full time

    Job SummaryWe are seeking a highly skilled CNC Machinist to join our team at Belcan. As a CNC Machinist, you will be responsible for setting up and operating CNC machines to produce high-quality parts and products.Key ResponsibilitiesSetup and operate CNC machines to produce parts and productsPerform turning, drilling, boring, reaming, threading, tapping,...

  • CNC Machinist Specialist

    6 days ago

    Syracuse, New York, United States Belcan Full time

    Job SummaryWe are seeking a highly skilled CNC Machinist to join our team at Belcan. As a CNC Machinist, you will be responsible for operating and maintaining CNC machines to produce high-quality parts and products.Key ResponsibilitiesSetup and operate CNC machines to produce parts and productsPerform routine maintenance and troubleshooting on CNC...

  • CNC Machinist

    2 weeks ago

    Syracuse, New York, United States Rishabh RPO Full time

    Job SummaryWe are seeking a highly skilled CNC Operator to join our team at Rishabh RPO in Syracuse, NY. As a CNC Operator, you will be responsible for operating CNC machines, setting up and maintaining equipment, and ensuring high-quality production.Key ResponsibilitiesOperate CNC machines, including multi-axis lathes and milling machinesSet up and maintain...

  • CNC Machine Operator

    4 weeks ago

    Syracuse, New York, United States Staffworks CNY Full time

    Job OverviewStaffworks CNY is seeking a skilled CNC Machine Operator to join their team. As a CNC Machine Operator, you will be responsible for operating five CNC lathes, performing setup operations, and completing tooling repairs.Key ResponsibilitiesOperate CNC lathes from written programsPerform setup operations, adjust, and complete tooling repairsUse...

  • CNC Machine Operator

    1 month ago

    Syracuse, New York, United States Jaquith Industries Full time

    Job SummaryJaquith Industries is seeking a highly skilled CNC Machine Operator to join our production team. As a CNC Machine Operator, you will be responsible for setting up and operating various types of saws, horizontal and vertical lathes, saws, and drill press equipment to perform various turning, drilling, taping, and boring operations on a variety of...

  • Casting Finisher Specialist

    1 week ago

    Syracuse, New York, United States Eaton Full time

    Job SummaryEaton's ES GEIS CHD division is seeking a skilled Large Casting Finisher to join our team. This role involves working on the 2nd shift, with core hours from 2:00 pm to 10:30 pm. The hourly rate for this position is $23.34 per hour.Please note that the salary information provided is a general guideline only. Salaries are based on candidate skills,...

  • Casting Finisher Specialist

    3 days ago

    Syracuse, New York, United States Eaton Full time

    Job SummaryEaton's ES GEIS CHD division is seeking a skilled Large Casting Finisher to join our team. This role involves working on the 2nd shift, with core hours from 2:00 pm to 10:30 pm. The hourly rate for this position is $23.34 per hour.Please note that the salary information provided is a general guideline only. Salaries are based on candidate skills,...