Structural Welder/Fitter
2 days ago
We are seeking a highly skilled structural welder/fitter to join our team at Anvil Attachments. As a key member of our fabrication team, you will be responsible for assembling structural forms using knowledge of welding and fitting techniques.
Responsibilities:- Work in a fabrication shop environment, maintaining a safety-focused mindset and constantly watching out for hazards to your own safety and the safety of your coworkers.
- Read and interpret blueprints, diagrams, and other written instructions to perform fitting assignments according to blueprints and layout specifications.
- Weld in flat, horizontal, and vertical positions, utilizing weld gauges to conform to the proper welding procedure per the drawing.
- Perform GMAW (MIG), Flux-Core, and stick-rod welding, selecting the proper weld wire for the job at hand.
- Pre-heat prior to welding high strength steel, verifying pre-heat with temperature sticks and/or infrared temperature guns.
- Lay-out, measure, position, align, and fit into place, using jigs and fixtures as needed.
- Move material using gantry and/or jib cranes, and perform general housekeeping/clean up in assigned area.
- Be open-minded and willing to perform other duties as assigned, with a good attitude, work ethic, and contribute to positive shop morale.
- Must follow and maintain safety standards and avoid cutting corners that may compromise safety.
- Attend and participate in safety meetings, pre-job safety briefings, etc.
- Must be able to set up and operate MIG welding equipment, and be proficient in oxy-fuel torch cutting and arc-gouging.
- Must be able to read a tape measure and other measuring tools, and have the ability to add, subtract, multiply and divide using whole and fractional measurements.
- Knowledge of all equipment and tools necessary to perform the duties required of a structural welder/fitter.
- Ability and/or willingness to learn how to operate material handling equipment, including forklifts and overhead cranes.
- Must be able to perform, without assistance, the essential job requirements identified in the Functional Job Description for this position, including the ability to lift and move 50 lbs., climbing up and down ladders, bending and squatting for long periods of time, and using sledgehammers up to 20 lbs.
- Use required personal protective equipment, and report unsafe conditions and/or practices and make safety suggestions.
- High school diploma/GED preferred.
- Education directly related to welding and/or fitting obtained through a trade or vocational school program and/or 2+ years experience operating as a structural welder/fitter or a form of apprenticeship welding training.
- Welding: 2 years (Preferred).
- Fitting: 2 years (Preferred).
- $30 - $38 per hour, depending on experience and skillset.
- Quarterly incentive program, based on performance guidelines.
- Blueprint Reading.
- Welding Setups for Production.
- MIG Welder.
- Stick Welder.
- Flux-Cored Arc Welder.
$30 - $38 / hr
-
Welder/Fitter
4 months ago
Auburn Hills, United States START Full timeJob DescriptionJob Description**This is a temp to hire position for 90 days**Job descriptionResponsibilitiesAnalyze the blueprints to determine the specifications, tolerances, and locate/read the stock list on a drawingConstruct structural components from raw materialsUse welding equipment to fuse structural componentsInspect fabricated components to ensure...
-
Welder Fitter
4 months ago
Auburn Hills, United States Spark Talent Inc Full timeJob DescriptionJob DescriptionJob Title: Welder Fitter, DIRECT HIRE $20 - 36 per hourAbout the CompanySpark Talent Acquisition is a Michigan-headquartered recruiting and staffing company that connects great talent with great employers. We understand that finding a new position can be stressful and identifying top talent can be challenging. For us to maximize...
-
Aerospace Weld Fitter
2 months ago
Auburn Hills, United States Intelligen Full timeJob DescriptionJob DescriptionPosition Title: Weld Fitter Location: Auburn Hills Shifts Needed: Day or Night Days | Monday- Friday 6a-4:45p +Saturday 6a-12p Nights | Monday- Friday 4p-2:45a + Saturday 12p-6p Character of Position As a Weld Fitter, you will be responsiblefor fitting, fabricating, and assembling the structural components that make upa tool for...
-
Steel Fabricator/ Fitter
4 months ago
Auburn, United States Precision Iron Works Inc Full timeJob DescriptionJob DescriptionWe are seeking a Fitter to become an integral part of our team!Requirements: Fabrication of architectural and structural steel per detailed shop drawings.Previous experience in steel fabrication, manufacturing, or other related fieldsFamiliarity with welding tools and proceduresFamiliarity with overhead cranesAbility to handle...
-
Weld Fitter
4 weeks ago
Auburn Hills, United States Visioneering, Inc. Full timeJob DescriptionJob DescriptionVisioneering Story- A powerful team with a strong work ethic.Visioneering, Inc. provides the aerospace industry with high-quality conceptual design, engineering, and innovative tooling. As a full-service provider, established in 1953, we provide industry-leading organizations with totally integrated program management, design,...
-
Welder Specialist
6 days ago
Auburn, Alabama, United States NebulaWorks Full timeWe are seeking a skilled Welder to join our team at NebulaWorks. As a Welder, you will be responsible for general welding tasks on bogies and assembly of various systems and structural components.Your Responsibilities:Perform general welding tasks on bogiesAssemble various systems and structural componentsRequirements:Successfully completed training as a...
-
Welder
2 months ago
Auburn, United States Precision Iron Works Inc Full timeJob DescriptionJob DescriptionWe are seeking a Welder to become an integral part of our team!Requirements: Lay out, fit, and fabricate metal components to assemble structural steel, using knowledge of welding techniques, metallurgy, and engineering requirements.Fabrication of architectural and structural steel per detailed shop drawings.Previous experience...
-
Structural Welding Technician
3 weeks ago
Auburn Hills, Michigan, United States Visioneering, Inc. Full timeJob OverviewVisioneering Story - A dedicated team with a robust work ethic.Visioneering, Inc. serves the aerospace sector by delivering exceptional conceptual design, engineering, and innovative tooling solutions. Established in 1953, we are a comprehensive service provider offering industry-leading organizations fully integrated program management, design,...
-
Welder Specialist
3 weeks ago
Auburn, Alabama, United States Precision Iron Works Inc Full timeJob OverviewWe are seeking a skilled Welder Specialist to join our team at Precision Iron Works, Inc.About the RoleFabricate and assemble structural steel components using advanced welding techniques and knowledge of metallurgy and engineering requirements.Collaborate with our experienced team to deliver high-quality steel fabrication projects.Develop and...
-
Welder
2 months ago
Auburn Hills, United States Visioneering, Inc. Full timeJob DescriptionJob DescriptionVisioneering Story- A powerful team with a strong work ethic.Visioneering, Inc. provides the aerospace industry with high-quality conceptual design, engineering, and innovative tooling. As a full-service provider, established in 1953, we provide industry-leading organizations with totally integrated program management, design,...
-
Aerospace Welding Specialist
3 weeks ago
Auburn Hills, Michigan, United States Spark Talent Inc Full timeJob OverviewPosition: Welder Fitter, Direct Hire, Competitive Hourly RateCompany OverviewSpark Talent Acquisition is a leading recruiting and staffing firm based in Michigan, dedicated to bridging the gap between exceptional talent and outstanding employers. We recognize that the job search process can be daunting, and we strive to simplify it by thoroughly...
-
Metal Fabrication Specialist
3 weeks ago
Auburn Hills, Michigan, United States START Full timeStructural Components Fabricator Opportunity at START - Specialized Talent Acquisition Recruiting TeamThis position offers a pathway from temporary to permanent employment.Key Responsibilities:Interpret blueprints to ascertain specifications, tolerances, and identify stock lists on schematicsFabricate structural components using raw materialsEmploy welding...
-
Maintenance Technician
5 days ago
Auburn Hills, Michigan, United States Dana Corporation Full timeJob SummaryWe are seeking a skilled Maintenance Technician to join our team at Dana Corporation. As a key member of our maintenance team, you will be responsible for performing general maintenance and repairs on facility equipment and property structures, as well as performing grounds maintenance.Key ResponsibilitiesPerform routine maintenance and repairs on...
-
Maintenance Technician
5 days ago
Auburn Hills, Michigan, United States NESCO Inc Full timeMaintenance Technician Job DescriptionNesco Resource is seeking a skilled Maintenance Technician to join our team in the Auburn Hills Area.As a Maintenance Technician, you will be responsible for performing general maintenance and repairs on facility equipment and property structures, as well as grounds maintenance.Under the direct supervision of the...
-
Metal Fabrication Specialist
4 weeks ago
Auburn Hills, Michigan, United States Visioneering, Inc. Full timeJob OverviewVisioneering Story - A dedicated team with a robust work ethic.Visioneering, Inc. serves the aerospace sector by delivering exceptional conceptual design, engineering, and innovative tooling solutions. Established in 1953, we are a comprehensive service provider, offering leading organizations fully integrated program management, design,...
-
Metal Fabrication Specialist
4 weeks ago
Auburn Hills, Michigan, United States Visioneering, Inc. Full timeJob OverviewVisioneering Story - A dedicated team with a robust work ethic.Visioneering, Inc. serves the aerospace sector by delivering exceptional conceptual design, engineering, and innovative tooling solutions. Established in 1953, we are a comprehensive service provider, offering leading organizations fully integrated program management, design,...
-
Metal Fabrication Specialist
4 weeks ago
Auburn Hills, Michigan, United States Visioneering, Inc. Full timeJob OverviewVisioneering Story - A dedicated team with a robust work ethic.Visioneering, Inc. serves the aerospace sector by delivering top-notch conceptual design, engineering, and innovative tooling solutions. Established in 1953, we are a comprehensive service provider, offering fully integrated program management, design, engineering, NC machining, and...
-
Pipefitting and Welding Specialist
3 weeks ago
Auburn, Kentucky, United States Lee Full timeAt Lee Company, we are seeking a skilled Welder to become a vital part of our team. We take pride in delivering HVAC, plumbing, and electrical solutions for commercial projects across various states. Our team values integrity, safety, and excellence in construction, with a rich history of service.Job Overview:Engage in activities such as cutting, fitting,...
-
Maintenance Technician
3 weeks ago
Auburn Hills, Michigan, United States Dana Corporation Full timeAbout the RoleDana Corporation is seeking a highly skilled Maintenance Technician to join our team. As a key member of our facilities maintenance team, you will be responsible for performing general maintenance and repairs on facility equipment and property structures, as well as performing grounds maintenance.Key ResponsibilitiesAdhere to Quality, Safety,...
-
Maintenance Technician
7 days ago
Auburn Hills, Michigan, United States Dana Incorporated Full timeJob SummaryUnder the direct supervision of the Maintenance Supervisor, the Maintenance Technician will be responsible for performing general maintenance and repairs on facility equipment and property structures, in addition to performing grounds maintenance.All work will be done in compliance with EPA, Hazmat and OSHA safety rules and regulations.Key...