Test Equipment Specialist
5 hours ago
Benchmark Electronics is seeking a skilled Test Operator II to join our team. As a Test Operator II, you will be responsible for performing ICT and functional Go/No Go testing on systems assemblies, subassemblies, printed circuit boards, and products utilizing test equipment and a variety of test instruments and procedures.
Key Responsibilities- Set up test equipment and understand the test and assembly processes for each type of board or systems/subassembly tested.
- Operate test equipment requiring basic computer skills and the knowledge of test programs so that proper identification and interpretation of failure parameters can be recorded and entered into the Quality Management System.
- Identify component types and read component values or integrated circuits, resistors, capacitors, etc.
- Identify, by sight or with appropriate devices, workmanship and material defects and affix appropriate marking or defect tags in accordance with Quality Assurance procedures.
- Follow step-by-step procedure while performing various duties such as frequency and/or voltage adjustment and observe meter reading to determine whether the item being tested meets minimum requirements specified in test procedure or test program.
- Maintain records of unit tested, accepted or rejected, utilizing statistical process control charts.
- Apply basic to intermediate knowledge of applicable specification and normal product standards to the performance of individual electrical test.
- All employees are responsible for the Quality of their work to ensure BEI meets or exceeds Customer Satisfaction.
- Independently configure and operate test equipment and interpret basic test results; learn to relate the results to the specific PCB area to inspect for manufacturing defects.
- Make verbal or written reports on test finding for the purpose of improving test procedures or test equipment.
- If working with printed circuit boards, perform troubleshooting activities up to PCA level following techniques and procedures as defined by test engineering.
- Assist in the mentoring and developing of other testers when needed.
- Assist engineers and test technicians as requested and under their guidance.
- 2+ years of advanced electronic test (i.e. FCT/HASS)
- Ability to use hand tools and general test equipment (multi-meters, oscilloscope, power supplies, etc.) if working with electronic components.
- Demonstrate basic knowledge operating DMMs to verify possible opens, short, resistance and diode check in working with electronic components.
- Ability to read and understand schematics, drawings, assembly prints, procedures, specifications and other documentation describing electronic assemblies if working with components.
- Comply with BEI quality assurance policies and methodologies; understand and use IPC quality and workmanship standards; develop a strong quality orientation.
- Accepting of opportunities to train on new equipment and to cross-train into other site operations, as needed.
- Excellent written and verbal communication skills.
- Effective interpersonal skills.
- Effective multitasking skills and the ability to take on additional responsibilities as required.
- Effective organization and prioritization skills.
- Demonstrate high attention to detail.
- Demonstrate discretion, confidentiality and professionalism when representing the company.
- Ability to support a 24/7 global business operation as required.
- Ability to work overtime when needed.
- Ability to work with diverse groups.
- Participate in a continuous improvement activity.
- Ability to read, write and perform basic math.
- High School Diploma or GED
Huntsville, AL
ShiftShift 1
Work ScheduleM-F
Full Time
Export ControlThis job position may include access to controlled information or technology covered under applicable U.S. export control laws. As such, employment for this job position may be contingent on either verification that an applicant falls under the definition of a "U.S. Person" (which includes U.S. citizens, U.S. lawful permanent residents, and those granted U.S. asylum or refugee status) or on the Company timely obtaining any necessary export license required under federal laws. The Company evaluates such export license situations on a case-by-case basis and may decline to proceed with a job applicant in its sole discretion since export license applications can take many weeks to be processed.
-
Test Equipment Specialist
1 week ago
Huntsville, Alabama, United States Benchmark Electronics Full timeJob SummaryWe are seeking a skilled Test Operator II to join our team at Benchmark Electronics. As a Test Operator II, you will be responsible for performing ICT and functional Go/No Go testing on systems assemblies, subassemblies, printed circuit boards, and products utilizing test equipment and a variety of test instruments and procedures.Key...
-
Lead Tactical Communications Specialist
4 weeks ago
Huntsville, Alabama, United States Lynx Support Specialist, Inc. Full timeJob OverviewLynx Support Specialist, Inc. is seeking a Senior Network Communications Engineer to contribute to our advanced projects.Position Summary:The selected candidate will deliver expert technical guidance for tactical communication devices and interconnected systems, facilitating research, development, integration, and procurement...
-
**Test Automation Specialist**
2 weeks ago
Huntsville, Alabama, United States Quantum Ventures Full timeWe are seeking a highly skilled **Test Automation Specialist** to join our team at Quantum Ventures. As a key member of our team, you will play a crucial role in elevating our technologies to the next level.**Key Responsibilities:**Design and develop automated testing frameworks to ensure the quality and reliability of our software products.Collaborate with...
-
Huntsville, Alabama, United States Pacific Technical Resources LLC Full timeCompany OverviewPacific Technical Resources, LLC is a leading recruitment firm specializing in IT and Engineering placements, with a strong focus on the Aerospace and Defense sectors.Position SummaryWe are currently seeking a highly skilled Senior Electrical Design Engineer to lead the development of test equipment for aerospace applications. This role...
-
Radar Systems Test Specialist
4 weeks ago
Huntsville, Alabama, United States IERUS Technologies Inc Full timeRadar Systems Test Specialist PositionThe Radar Systems Test Specialist role is a full-time opportunity.The selected candidate will contribute to the Ballistic Missile Defense System (BMDS) Integrated Ground Tests (GTIs), Distributed Ground Tests (GTDs), and Flight Test (FT) operations.Key ResponsibilitiesAssist in the setup and verification of radar mission...
-
Physician Assistant
2 weeks ago
Huntsville, Alabama, United States SportsMED Orthopaedic Specialist, INC Full timeJob OpportunityWe are seeking a skilled and experienced mid-level provider to join our team at SportsMED Orthopaedic Specialist, INC.Job Summary:Work alongside one of our Physical Medicine and Rehabilitation physicians in clinic and surgeryProvide high-quality patient care and support in a fast-paced environmentCollaborate with our multidisciplinary team to...
-
Production Equipment Specialist
3 weeks ago
Huntsville, Alabama, United States Onin Full timeJob OverviewOnin Staffing is seeking dedicated and skilled individuals to fill the role of Production Equipment Specialist. This position is ideal for those who excel in a dynamic, hands-on work environment and are eager to develop their skills further. We value team-oriented individuals who demonstrate initiative and a strong work ethic.Compensation: $16...
-
Electronics Testing and Integration Specialist
4 weeks ago
Huntsville, Alabama, United States Butler America Full timePosition: Electronics Integration and Test Engineer Location: Huntsville, AL Job ID: #68205 Compensation: $47-54 per hour (W2)Employment Type: Permanent Overview: The selected candidate will play a pivotal role in the development and upkeep of specialized testing apparatus utilized for conducting simulated launch evaluations of the engine control system....
-
System Integration and Test Specialist
2 weeks ago
Huntsville, Alabama, United States Leidos Full timeJob SummaryLeidos is seeking a highly skilled System Integration and Test Specialist to join our team within the BMD Simulations and Analysis Portfolio.This role will involve working with a diverse team of test engineers, system engineers, software developers, and analysts to support our customer's software product test capabilities and internal testing in a...
-
Heavy Equipment Transport Specialist
4 weeks ago
Huntsville, Alabama, United States Thompson Tractor Full timeHeavy Equipment Transport Specialist - Thompson TractorJob Category: Transportation and LogisticsJob Details:Description:The Heavy Equipment Transport Specialist is tasked with the responsibility of delivering parts, machinery, and equipment to various customer, vendor, and company locations, as well as job sites. This role requires the ability to operate...
-
Explosives Safety Testing Specialist
4 weeks ago
Huntsville, Alabama, United States APT Research, Inc. Full timePosition OverviewSummary of RoleAPT Research, Inc. is seeking a part-time, on-call Explosives Safety Testing Specialist to contribute to our projects. This role can be performed remotely or in designated locations. The position involves a range of responsibilities that require specialized knowledge in explosives safety.As an employee-owned engineering firm,...
-
Senior Network Communications Engineer
3 weeks ago
Huntsville, Alabama, United States Lynx Support Specialist, Inc. Full timePosition OverviewLynx Support Specialist, Inc. is seeking a Senior Network Communications Engineer to contribute to advanced projects in tactical communication systems.Role Responsibilities:The selected candidate will provide specialized knowledge in tactical communication equipment and integrated network systems, supporting various phases of development and...
-
Equipment Maintenance Specialist
3 days ago
Huntsville, Alabama, United States Toyota Alabama Full timeJob Summary Toyota Alabama is seeking a highly skilled and motivated Equipment Maintenance Technician to join our team. As a key member of our maintenance team, you will be responsible for performing preventative maintenance on electrical and mechanical equipment in accordance with standards. About the Role In this role, you will be responsible for...
-
Manufacturing Assembly and Test Specialist
4 weeks ago
Huntsville, Alabama, United States Leidos Full timePosition OverviewLeidos Dynetics is in search of a skilled Manufacturing Assembly and Test Specialist to contribute to a multifaceted team dedicated to developing innovative solutions for intricate challenges. With a presence across the United States in sectors such as defense, aerospace, cybersecurity, and commercial industries, Leidos Dynetics delivers...
-
**Manufacturing Equipment Specialist Lead**
3 weeks ago
Huntsville, Alabama, United States ICONMA, LLC Full timeJob DescriptionAt ICONMA, LLC, we are seeking a highly skilled Manufacturing Equipment Specialist Lead to join our team. As a key member of our operations team, you will be responsible for ensuring the efficient and effective use of manufacturing equipment.Key Responsibilities:Evaluates and Selects Equipment: Conduct thorough evaluations of equipment options...
-
Senior Network Communications Engineer
3 weeks ago
Huntsville, Alabama, United States Lynx Support Specialist, Inc. Full timeJob OverviewLynx Support Specialist, Inc. is seeking a Senior Network Communications Engineer to contribute to advanced defense initiatives.Position Responsibilities:The selected candidate will deliver expert guidance on tactical communication devices and integrated network systems, supporting various phases of development and acquisition.Independence in...
-
Senior Network Communications Engineer
3 weeks ago
Huntsville, Alabama, United States Lynx Support Specialist, Inc. Full timePosition OverviewLynx Support Specialist, Inc. is seeking a Senior Network Communications Engineer to provide essential support for advanced communication systems.Role Responsibilities:The selected candidate will deliver technical guidance for tactical communication devices and interconnected systems, contributing to research, development, and integration...
-
**Manufacturing Equipment Specialist Lead**
3 weeks ago
Huntsville, Alabama, United States ICONMA, LLC Full timeJob DescriptionAt ICONMA, LLC, we are seeking a highly skilled Manufacturing Equipment Specialist Lead to join our team. As a key member of our operations team, you will be responsible for ensuring the efficient and effective use of manufacturing equipment.Key Responsibilities:Evaluates and Selects Equipment: Conduct thorough evaluations of equipment options...
-
Equipment Maintenance Specialist
2 days ago
Huntsville, Alabama, United States Toyota Alabama Full timeJob SummaryWe are seeking a highly skilled Equipment Maintenance Technician to join our team at Toyota Alabama. As a key member of our maintenance team, you will be responsible for performing preventative maintenance on electrical and mechanical equipment, ensuring the smooth operation of our manufacturing processes.ResponsibilitiesAs an Equipment...
-
Equipment Maintenance Specialist
1 week ago
Huntsville, Alabama, United States Toyota Alabama Full timeJob SummaryWe are seeking a highly skilled Maintenance Technician to join our team at Toyota Alabama. As a key member of our maintenance team, you will be responsible for performing preventative maintenance on electrical and mechanical equipment, ensuring the smooth operation of our manufacturing processes.About the RoleThis is a challenging and rewarding...