Pipe Welder/Fabricator
2 weeks ago
Responsible for the completion of each weld to the specified standards using appropriate equipment and materials, while following the employer's recommended procedures. It's also important to observe applicable safety precautions, to minimize the risk of injury to the welder or other workers nearby.
Primary Job Function:
- Operate safety equipment and use safe work habits.
- Lay out, position, align, and secure parts and assemblies prior to assembly/tacking and or welding using prescribed fixtures and proper work procedures
- Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as, gas metal arc, flux-cored arc, shielded metal arc, and submerged arc welding, within the parameters outlined in work procedures
- Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
- Examine work pieces for defects and measure work pieces with straightedges or templates to ensure conformance with specifications.
- Monitor welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
- Detect faulty operation of equipment or defective materials and notify supervisors.
- Determine required equipment and welding methods via established work procedures and apply proper welding techniques.
- Mark or tag material with proper job number, piece marks, and other identifying marks as required.
- Position and secure work-pieces, using hoists, cranes
- Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
- A minimum of 5 years welding experience
- Candidate should have a basic welding aptitude, 2 year technical degree or related work experience preferred
Pipe Fabrication Shop
Pickett Systems single hand pipe welder requirements are as follows:
- Welder shall be tested on 2" monster coupon in 6G position
Pickett Systems single hand welder requirements are as follows:
- Welder shall be tested meeting all code requirements for AWS D1.1
- Must be able to lift and carry a minimum of 50 lbs.
- Must be able to push and pull a minimum of 100lbs.
- Must be able to work proficiently with hands and wrists and be able to grasp objects
- Must be able to stand and walk for extended periods of time
- Must be able to bend and stoop frequently and crawl and work laying down in awkward positions frequently
- Must be able to operate machinery and be able to operate foot controls on equipment
- Must be able to work outside 100% of the time in extreme temperatures and among flammables
- Will be exposed to hot metals, welding fumes, extreme temperatures while welding
- Complies with Strike's policies and procedures
- Complies with Strike's Drug & Alcohol Policy maintaining favorable drug testing results throughout employment
- Performs job safely with respect to others, property and individual safety
- Works effectively with others to encourage teamwork and productivity
- Authorized to work in the United States
Pickett is an Equal Opportunity Employer
-
Pipe Fabricator
5 days ago
Houston, Texas, United States Tradesmen International, Inc. Full timeJob Summary:Tradesmen International, Inc. is seeking an experienced Pipe Welder to join our team. As a Pipe Welder, you will be responsible for fabricating and assembling metal products, interpreting drawings and prints, and ensuring the safe operation of equipment.Key Responsibilities:Dressing and heat treating of metal productsInterpreting drawings and...
-
Pipe Welder and Fabrication Specialist
1 week ago
Sioux City, Iowa, United States Thermogenics LLC Full timeJob OverviewPOSITION SUMMARY:Under the supervision of the Field Manager, the Pipe Welder and Fabrication Specialist is responsible for executing welding, fabrication, and fitting tasks related to boiler maintenance and assembly, with an emphasis on high-quality welds for steam and gas systems. This role is integral to the Service Team, engaging in mechanical...
-
Experienced Pipe Fabricator
2 weeks ago
Lenoir City, Tennessee, United States A-Lert Construction Services Full timeJob OverviewA-Lert Construction Services is seeking a proficient pipe welder to contribute to our operations. The successful candidate will be responsible for the layout, fabrication, assembly, installation, and maintenance of piping and piping systems utilized in various industrial processing applications. We welcome applications from both journeyman-level...
-
Welder/Fabricator
2 months ago
Watford City, United States TTK Enterprises Full timeJob DescriptionJob DescriptionResponsibilities:- Fabricate and assemble metal components based on schematics and specifications- Operate plasma cutting equipment to cut metal sheets into desired shapes and sizes- Use press brake machines to bend and shape metal pieces- Weld and solder metal components together to create sturdy structures- Thread pipes and...
-
P&G Box Elder UT
3 weeks ago
Bear River City, United States Flour US Craft Full timeP&G Box Elder UT - Pipe Welder / Welding Fabrication and Repair Bear River City Utah Diversity Statement At Fluor, we are proud to design and build projects and careers. This requires teams that are as unique as the projects we execute. We are committed to fostering a work environment that embraces Diversity, Equity, and Inclusion (DE&I) for all so our...
-
Fabricator Welder
3 weeks ago
Kansas City, Missouri, United States JARBO Full timeSummary – Fabricator / Welder: As a Fabricator / Welder, you will be responsible for fabricating and repairing metal by applying appropriate welding techniques to support the production of high quality, small batch products with a well-respected precision manufacturer that has been in stable operation for over 95 years. What's in it for you as a Fabricator...
-
Fabricator Welder
3 weeks ago
Kansas City, United States JARBO Full timeSummary – Fabricator / Welder: As a Fabricator / Welder, you will be responsible for fabricating and repairing metal by applying appropriate welding techniques to support the production of high quality, small batch products with a well-respected precision manufacturer that has been in stable operation for over 95 years. What's in it for you as a...
-
Fabricator / Welder
3 weeks ago
Kansas City, United States JARBO Full timeJob DescriptionJob DescriptionSummary – Fabricator / Welder: As a Fabricator / Welder, you will be responsible for fabricating and repairing metal by applying appropriate welding techniques to support the production of high quality, small batch products with a well-respected precision manufacturer that has been in stable operation for over 95 years....
-
Fabricator / Welder
2 weeks ago
Kansas City, United States JARBO Full timeJob DescriptionJob DescriptionSummary – Fabricator / Welder: As a Fabricator / Welder, you will be responsible for fabricating and repairing metal by applying appropriate welding techniques to support the production of high quality, small batch products with a well-respected precision manufacturer that has been in stable operation for over 95 years....
-
TIG Pipe Welder Specialist
1 week ago
Panama City Beach, Florida, United States Eastern Shipbuilding Group Full timePosition TitleTIG Pipe Welder 1/CJob OverviewAs a TIG Pipe Welder, you will be responsible for planning, laying out, welding, installing, testing, and repairing various types of piping and similar tubular products. This role requires adherence to plans, specifications, codes, and industry standards while collaborating with other trades as directed by...
-
Welder
2 weeks ago
Kansas City, United States Tradesmen International Full timeTradesmen International - JobID: 93DCB82D25A341B19F4BBC2EF378ECC2 [Fabricator] As a Welder at Tradesmen International, you'll: Read blueprints and other engineering drawings in order to perform efficiently; Read and interrupt technical manuals as applicable; Demonstrate knowledge of various metals characteristic and qualities including the correct welding...
-
Welder/Fabricator
2 months ago
Dade City, United States Castros Welding Services, LLC Full timeJob DescriptionJob DescriptionWe are seeking a Welder/Fabricator to become a part of our team! The Welder will use specialized equipment to weld and assemble new metal forms.Responsibilities:Manufacture and fabricate finished metal productsInstall and repair various equipment and componentsFollow blueprints to meet product specificationsCalculate material...
-
Fabrication Welder
2 weeks ago
Jefferson City, Missouri, United States PEAK Technical Staffing USA Full timePosition/Title:Fabrication Welder Type: Contract to DirectLocation: Jefferson City, MOShift Differential: $1.00 shift differential for our B/evening shiftShifts Available:B: Monday-Thursday 4:30pm-3:00am OR Weekend: Friday-Sunday 6:00am-6:00pmPosition Shift Occupancy: Shift B or WeekendsJob Overview & Responsibilities: As a Fabrication Welder, you will be...
-
Certified Pipe Welder
5 days ago
Oklahoma City, Oklahoma, United States Tradesmen International, Inc. Full timeJob Summary:Tradesmen International is seeking a skilled ASME Pipe Welder to join our team for projects in the Gainesville, TX area. This is a first shift opportunity with a competitive pay rate of $27/hour based on experience, plus a $125/day worked per diem for travelers 60+ miles from the job-site.Key Responsibilities:Coded vessel weldingSkid fabrication...
-
Welder Fabricator
3 days ago
Boyne City, Michigan, United States Daifuku Full timeJob SummaryWe are seeking a skilled Welder Fabricator to join our team at Daifuku Airport America Corporation. As a Welder Fabricator, you will be responsible for setting up, adjusting, and operating welding equipment to join metal parts together.Key ResponsibilitiesWelding Operations: Set up and operate mig or heli arc welders to join metal parts by spot or...
-
Pipe Welder
2 weeks ago
Orange City, United States NES Fircroft Full timeJob description Responsibilities & Qualifications of the Pipe Welder include, but are not limited to: Pipe Test - 6G test, Tig all the way out on Stainless Steel - Visual Test Report any safety issues to supervisor Works with others as required in a team based work environment Follows daily production schedule to meet internal and external customer...
-
Sioux City, Iowa, United States Burke Engineering Full timeWelder/Fabricator Position at Burke EngineeringWe are seeking a skilled Welder/Fabricator to contribute to our fabrication department's success. As a key member of our team, you will be responsible for welding and fabricating metal components using light gauge MIG welding techniques, ensuring high-quality products that meet our customers'...
-
Welder/Fabricator
2 months ago
Rapid City, United States Dakota Fluid Power Full timeJob DescriptionJob DescriptionDue to continued growth, Adams Machining & Welding, a division of Dakota Fluid Power, Inc., is looking for an individual to fill an opening for a Welder/Fabricator. Come join our team! Excellent benefits package, PTO, and competitive wages.JOB DUTIES:Fabrication of custom hydraulic power units, control panels, custom...
-
Welder/Fabricator
3 months ago
Rapid City, United States Dakota Fluid Power Full timeJob DescriptionJob DescriptionDue to continued growth, Adams Machining & Welding, a division of Dakota Fluid Power, Inc., is looking for an individual to fill an opening for a Welder/Fabricator. Come join our team! Excellent benefits package, PTO, and competitive wages.JOB DUTIES:Fabrication of custom hydraulic power units, control panels, custom...
-
TIG Pipe Welder Specialist
2 weeks ago
Panama City Beach, Florida, United States Eastern Shipbuilding Group Full timePosition TitleTIG Pipe Welder 1/CLocationPanama City, FL US (Primary)Job TypeFull-timeEducationHigh School / GEDTravelNoneSecurity Clearance RequiredNoneJob OverviewPurpose and Scope of JobThis job description outlines the fundamental responsibilities and functions of the position and is not intended to serve as an employment contract. The requirements,...
