Coil Winder Disc

1 day ago

Waukesha, United States Prolec Energy Full time
JOB SUMMARY

The Coil Winder role is a heavy assembly position that focuses on the assembly of our coil windings. In this position you would train to set up and wind medium and large power 1 and 2 wire disc windings, multiple disc windings from 1 to 16 wires, and screw and RV windings.

PRINCIPLE DUTIES AND RESPONSIBILITIES

  • Receive assignments and instructions from supervisor - both verbal and written. Follows drawings, Bill of Materials, and other established manufacturing procedures. Coordinate and communicate with supervision and team leads
  • Assemble material at work place.
  • Assemble components to cylinder
  • Perform machine and material set up
  • Load cylinder to machine.
  • Wind coil as per specs.
  • Verify accuracy of winding per in-process checklist
  • Unload and upend coil and position end assembly as required.
  • Assist others with their windings
  • Perform minor repairs and machine maintenance. Write repair work orders as required.
  • Repair coil in any department or work center.
  • Keep tools, equipment and work place neat and orderly
  • Manually bend leads
  • Brazing of conductor
  • Perform other work as required
  • Assist in training of new operators.
KNOWLEDGE, SKILLS & ABILITIES
  • Knowledge of winding machine, overhead crane, brazing equipment, dereeler, upender, hand drill, disc sander, lead clamping and bending equipment, bar clamping equipment, table and bandsaw, hydraulic bender, torch set, grinder, buffer and miscellaneous hand tools.
  • Materials used in this position include copper conductor, pressboard, emery cloth, paper insulation, glue, copoco paper, sil-foss and cloth tape.


This role works under general supervision. Work is precision in nature and therefore is both mentally and visually demanding. Individual is responsible for own work which is not readily inspected by others. Individual must have thorough knowledge of winding techniques and the ability to visualize the consequence of his workmanship across the total product.

EDUCATION AND EXPERIENCE

Required Education / Experience
  • High School Diploma or equivalent
CONTEXT

Reports To:

Production Supervisor

Number of Staff:

0

Department:

Coil Winding

Pay Grade

L15

Location

Waukesha, WI

FLSA Status:

Non-Exempt

ADDITIONAL INFORMATION

Key Working Relationships
  • Plant Supervision, Quality, Planning, etc.
  • Engineering Organization, including mechanical, electrical and manufacturing engineering groups


Physical Demands

Must be able to stand for extended periods of time. Must be able to occasionally sit, walk, climb, balance, push, pull, bend, twist, carry, work below waist level, and foot use.

Working Conditions

Shop-floor located on large manufacturing plant.

Prolec-GE Waukesha, Inc. is an equal opportunity employer and makes employment decisions without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, genetic information, disability, protected veteran status, or any other reason prohibited by applicable law.

  • Coil Winder Disc

    3 weeks ago

    Waukesha, United States PROLEC-GE WAUKESHA Full time

    JOB REQUIREMENTS: JOB SUMMARY The Coil Winder role is a heavy assembly position that focuses on the assembly of our coil windings. In this position you would train to set up and wind medium and large power 1 and 2 wire disc windings, multiple disc windings from 1 to 16 wires, and screw and RV windings. PRINCIPLE DUTIES AND RESPONSIBILITIES Receive...

  • Coil Winder Disc

    3 hours ago

    Waukesha, United States Prolec-GE Waukesha, Inc Full time

    JOB SUMMARY The Coil Winder role is a heavy assembly position that focuses on the assembly of our coil windings. In this position you would train to set up and wind medium and large power 1 and 2 wire disc windings, multiple disc windings from 1 to 16 wires, and screw and RV windings. PRINCIPLE DUTIES AND RESPONSIBILITIES Receive assignments and...

  • Coil Winder Specialist

    4 weeks ago

    Waukesha, Wisconsin, United States Prolec-GE Waukesha,Inc Full time

    Job SummaryThe Coil Winder role is a critical assembly position at Prolec-GE Waukesha, Inc. that focuses on the precise assembly of coil windings. In this position, you will train to set up and wind medium and large power 1 and 2 wire disc windings, multiple disc windings from 1 to 16 wires, and screw and RV windings.Key ResponsibilitiesReceive assignments...

  • Coil Winder Screw/RV

    3 months ago

    Waukesha, United States Prolec Energy Full time

    JOB SUMMARY The Coil Winder role is a heavy assembly position that focuses on the assembly of our coil windings. In this position you would train to set up and wind medium and large power 1 and 2 wire disc windings, multiple disc windings from 1 to 16 wires, and screw and RV windings. PRINCIPLE DUTIES AND RESPONSIBILITIESReceive assignments and instructions...

  • Coil Winder Screw/RV

    3 months ago

    Waukesha, United States Prolec-GE Waukesha, Inc Full time

    JOB SUMMARY The Coil Winder role is a heavy assembly position that focuses on the assembly of our coil windings. In this position you would train to set up and wind medium and large power 1 and 2 wire disc windings, multiple disc windings from 1 to 16 wires, and screw and RV windings. PRINCIPLE DUTIES AND RESPONSIBILITIES Receive assignments and...

  • Core and Coil Assembler

    1 month ago

    Waukesha, Wisconsin, United States Prolec-GE Waukesha,Inc Full time

    Job Title: Core and Coil AssemblerProlec-GE Waukesha, Inc. is seeking a skilled Core and Coil Assembler to join our team in a heavy mechanical assembly position. The successful candidate will be responsible for the internal assembly of our core and coils, working with various equipment and tools to ensure high-quality products.Key Responsibilities:Assemble...

  • Core and Coil Assembler

    1 month ago

    Waukesha, Wisconsin, United States Prolec-GE Waukesha,Inc Full time

    Job DescriptionJOB SUMMARYThe core and coil assembler role is a critical position within our manufacturing plant, focusing on the internal assembly of our core and coils. In this role, an employee will work on functions such as landing coils using an overhead crane, placing top yoke steel by hand, using hydraulic equipment to press coils, and utilizing...

  • Core and Coil Assembler

    2 months ago

    Waukesha, United States Prolec Energy Full time

    JOB SUMMARY The core and coil assembler role is a heavy mechanical assembly position that focuses on the internal assembly of our core and coils. In this role, an employee will work on functions such as landing coils using an overhead crane, placing top yoke steel by hand, using hydraulic equipment to press coils, and utilizing crimping equipment to connect...

  • Core and Coil Assembler

    3 weeks ago

    Waukesha, United States Prolec Energy Full time

    JOB SUMMARY The core and coil assembler role is a heavy mechanical assembly position that focuses on the internal assembly of our core and coils. In this role, an employee will work on functions such as landing coils using an overhead crane, placing top yoke steel by hand, using hydraulic equipment to press coils, and utilizing crimping equipment to connect...

  • Spacer Fabricator

    1 month ago

    Waukesha, United States Prolec-GE Waukesha, Inc Full time

    JOB SUMMARY This role is responsible for fabrication of radial spacers and assembly of bandaged spacers, tapered spacers, and fabrication and assembly of static ring. This role fabricates and assembles common spacer rings, washer assemblies, yoke insulation components and assemblies for the winding the core and coil. Manufacture and fabricate insulation...