Core and Coil Assembler

3 months ago

Waukesha, United States Prolec Energy Full time
JOB SUMMARY

The core and coil assembler role is a heavy mechanical assembly position that focuses on the internal assembly of our core and coils. In this role, an employee will work on functions such as landing coils using an overhead crane, placing top yoke steel by hand, using hydraulic equipment to press coils, and utilizing crimping equipment to connect insulated copper cables. An employee in this role must train, develop skills, and demonstrate proficiency in all of the following work center areas: Coil Landing, Core & Coil Assembly, and Internal Wiring. An employee may also learn additional skills in Booster Assembly and Rack and Cable Assembly.

PRINCIPLE DUTIES AND RESPONSIBILITIES

  • Receive assignments and instructions from supervisor - both verbal and written. Follows drawings, Bill of Materials, and other established manufacturing procedures. Coordinate and communicate with supervision and team leads.
  • Set up core.
  • Land Coils onto a Core (E-Assemble) using a crane.
  • Cut fix and spread core clamps.
  • Set up Pressing equipment and Press unit.
  • Lock in unit.
  • Take pressing equipment off of the unit and Top Yoke.
  • Perform work in other departments as needed.
  • Have the ability to look up unit non-conformances electronically.
  • Pull-in and complete Core & Coil Assembly for pre-lead ratio/inspection.
  • May work in Med Power, Large Power or Extra High Voltage product lines.
  • Assemble pressboard cylinders, end pack out, foot bars and phase barriers.
  • Crimp & insulate connections.
  • Assemble and wire the reactor.
  • Build and assemble Booster Unit complete (set up core/e-assembly through wiring) as needed.
  • Assemble Cleat & Leads Assemblies to unit (HV, LV, Top racks).
  • Resistance Braze Coil Conductor Leads & Cleat & Lead connections as required.
  • Braze sub-assemblies (bus bars, external assemblies, etc.) as required.
  • Layout and assemble Wood and Cable (Cleat and Lead) Racks for mains and boosters.
  • Assemble de-energized tap changer switches to wood racks.
  • Stack shunt steel for both the top and bottom of the internal assembly
  • Make minor repairs and machine maintenance. Write work orders for the repair of tooling and equipment.
  • Complete specific contamination control and cleanliness maintenance procedures such as vacuuming, performing magnetic seeps, and cleaning other items.
  • Complete 5S training and keep tools, equipment and work areas clean and orderly.
  • Follows all safety procedures and policies of company.
  • Will, as required, perform repair work on oiled component inside and outside of the tank.
  • Assist in training of new operators.
KNOWLEDGE, SKILLS & ABILITIES

Knowledge of brazing equipment, wire and cable cutters, grinders, disc sander, band saw, portable scaffolding and ladders, hydraulic crimpers, hydraulic jacks, pressing equipment, air pallets, chains, hooks, clamps, coil lifting spiders, overhead and jib crane, table saw, shears, various hand tools and others.

Materials used in this position include wood, cotton and crepe tape, connectors, metal and fiber bolts, and threaded stock, paper and fiber tubes, cable, buss bars, glue, pressboard, switch gear, silver solder, cleat and lead assemblies, assorted conductors of various size, top yoke, core assembly, windings, wood supports, spacer rings, insulating material, wood blocks and others.

Precision work and care required preventing major damage to components or unit. Operators work at heights up to approximately 18 feet. Top Yoke operation presents additional hazards because of sharp edges on steel. Assembly operations require mental and visual concentration to ensure compliance with engineering and quality specifications. S/he must be able to work in confined spaces, including working inside tanks.

EDUCATION AND EXPERIENCE

Required Education / Experience

High School Diploma or equivalent

ADDITIONAL INFORMATION

Key Working Relationships
  • Plant Supervision, Quality, Planning, etc.
  • Engineering Organization, including mechanical, electrical and manufacturing engineering groups


Physical Demands

Must be able to stand for extended periods of time. Must be able to frequently walk and stand. Must occasionally be able to climb, balance, push, pull, carry and sit. Will minimally work below waist level.

Working Conditions

Shop-floor located on large manufacturing plant.

Prolec-GE Waukesha, Inc. is an equal opportunity employer and makes employment decisions without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, genetic information, disability, protected veteran status, or any other reason prohibited by applicable law.

  • Core and Coil Assembler

    4 weeks ago

    Waukesha, United States Kelly Full time

    DIRECT HIRE OPPORTUNITY!!! Job Summary: The core and coil assembler role is a heavy mechanical assembly position that focuses on the internal assembly of our core and coils. In this role, an employee will work on functions such as landing coils using an overhead crane, placing top yoke steel by hand, using hydraulic equipment to press coils, and utilizing...

  • Coil Winder Specialist

    3 weeks ago

    Waukesha, Wisconsin, United States PROLEC-GE WAUKESHA Full time

    About the Job: We are seeking a skilled Coil Winder to join our team at PROLEC-GE WAUKESHA. This is a heavy assembly position that requires attention to detail and ability to work with precision equipment.Job Summary: The successful candidate will be responsible for assembling coil windings, setting up and operating winding machines, and performing minor...

  • Coil Winder Disc

    1 month ago

    Waukesha, United States PROLEC-GE WAUKESHA Full time

    JOB REQUIREMENTS: JOB SUMMARY The Coil Winder role is a heavy assembly position that focuses on the assembly of our coil windings. In this position you would train to set up and wind medium and large power 1 and 2 wire disc windings, multiple disc windings from 1 to 16 wires, and screw and RV windings. PRINCIPLE DUTIES AND RESPONSIBILITIES Receive...

  • Coil Winder Disc

    4 weeks ago

    Waukesha, United States PROLEC-GE WAUKESHA Full time

    JOB REQUIREMENTS: JOB SUMMARY The Coil Winder role is a heavy assembly position that focuses on the assembly of our coil windings. In this position you would train to set up and wind medium and large power 1 and 2 wire disc windings, multiple disc windings from 1 to 16 wires, and screw and RV windings. PRINCIPLE DUTIES AND RESPONSIBILITIES Receive...

  • Coil Winding Specialist

    4 weeks ago

    Waukesha, Wisconsin, United States Prolec-GE Waukesha,Inc Full time

    Job SummaryThis is a skilled assembly position in our coil winding department, focusing on the precise setup and winding of medium and large power 1 and 2 wire disc windings, multiple disc windings from 1 to 16 wires, and screw and RV windings.Key Responsibilities:Set up and operate equipment for winding coils according to specifications.Coordinate with...

  • Coil Winder Disc

    1 month ago

    Waukesha, United States Prolec Energy Full time

    JOB SUMMARY The Coil Winder role is a heavy assembly position that focuses on the assembly of our coil windings. In this position you would train to set up and wind medium and large power 1 and 2 wire disc windings, multiple disc windings from 1 to 16 wires, and screw and RV windings. PRINCIPLE DUTIES AND RESPONSIBILITIESReceive assignments and instructions...

  • Coil Winder Disc

    1 month ago

    Waukesha, United States Prolec-GE Waukesha, Inc Full time

    JOB SUMMARY The Coil Winder role is a heavy assembly position that focuses on the assembly of our coil windings. In this position you would train to set up and wind medium and large power 1 and 2 wire disc windings, multiple disc windings from 1 to 16 wires, and screw and RV windings. PRINCIPLE DUTIES AND RESPONSIBILITIES Receive assignments and...

  • Assembly Tanker Technician

    7 days ago

    Waukesha, Wisconsin, United States Eaton Aerospace Full time

    Eaton Aerospace is seeking an experienced Assembly Tanker Technician to join our team in Waukesha, WI.CompensationThe estimated hourly range for this position is $24.50 + $2.50/hr shift premium, totaling approximately $27.00 per hour.About the RoleThis assembly tanker is responsible for assembling tank substations and pad-mounted transformers with precision...

  • Tank Substation Assembler

    7 days ago

    Waukesha, Wisconsin, United States Eaton Aerospace Full time

    We are hiring a highly skilled Tank Substation Assembler (3rd Shift) to join our team at Eaton Aerospace in Waukesha, WI.Pay and BenefitsThe hourly salary for this role is expected to be around $26.50, with an additional $2.50/hr shift premium bringing the total compensation to $29.00 per hour.Job DescriptionThe successful candidate will be responsible for...

  • Electrical Equipment Assembler

    7 days ago

    Waukesha, Wisconsin, United States Eaton Full time

    About the RoleWe are seeking a skilled Electrical Equipment Assembler to join our team in Waukesha, WI.The estimated salary for this position is $29.50 per hour, based on industry standards and location.This role requires working 3 pm - 11 pm shifts, with potential overtime exceeding these hours.As an Electrical Equipment Assembler at Eaton, you will be...

  • Electrical Assembler

    2 weeks ago

    Waukesha, Wisconsin, United States Eaton Full time

    Job DescriptionJob Summary: We are seeking an experienced assembler to join our team in Waukesha, WI. The successful candidate will be responsible for assembling and testing transformers in a fast-paced production environment.Assemble and test transformers according to specificationsUse calibrated tooling to ensure accurate measurementsMaintain a clean and...

  • Electrical Assembly Technician

    7 days ago

    Waukesha, Wisconsin, United States Eaton Aerospace Full time

    At Eaton Aerospace, we are currently seeking a highly skilled Electrical Assembly Technician to join our team on Lincoln Avenue in Waukesha, WI. This role is responsible for assembling and testing electrical components for transformers, including tanks and accessories.Job Summary:The successful candidate will be responsible for performing a variety of tasks,...

  • Transformer Tanking Expert

    7 days ago

    Waukesha, Wisconsin, United States Eaton Aerospace Full time

    Are you looking for a challenging and rewarding role in the aerospace industry? Look no further than Eaton Aerospace's Electrical Assembly Technician position. We are seeking a highly skilled individual to join our team on Lincoln Avenue in Waukesha, WI.About the Role:The successful candidate will be responsible for assembling and testing electrical...

  • Ground Investigation Assistant

    2 days ago

    Waukesha, Wisconsin, United States Intertek Full time

    Intertek is seeking an experienced Ground Investigation Assistant to join our team. In this role, you will assist the driller with various tasks, including soil drilling, rock coring, and sampling.The ideal candidate will have 6 months of construction laborer experience and be able to travel up to 50%. They must also be able to work off-shift and overtime as...

  • Skilled Fabricator and Welder

    4 weeks ago

    Waukesha, Wisconsin, United States American Technical Services Full time

    Job OverviewAmerican Technical Services, a leading employment agency in Southeastern Wisconsin, seeks skilled fabricators and welders to join our team. As a fabricator and welder at ATS, you will have the opportunity to work on various projects, including large weldments and structural components.The ideal candidate will possess excellent welding skills,...

  • Driller Operations Support

    2 days ago

    Waukesha, Wisconsin, United States Intertek Full time

    We are looking for an experienced Driller Operations Support to join our team at Intertek. This role involves assisting the driller with various tasks, including loading/unloading augers, preparing tooling and supplies, and performing site cleanup.The ideal candidate will have a high school diploma or equivalent and some experience in construction laborer...

  • Site Assistant

    2 days ago

    Waukesha, Wisconsin, United States Intertek Full time

    At Intertek, we are seeking an Experienced Site Assistant - Soil Drilling Specialist to join our Professional Services Industries team in Waukesha, WI. This role offers a fantastic opportunity to grow a versatile career in the architectural, engineering, and construction industry.We offer competitive compensation packages, including medical, dental, vision,...

  • Experienced Drilling Operations Specialist

    4 weeks ago

    Waukesha, Wisconsin, United States Intertek Full time

    Company OverviewIntertek is a leading provider of quality and safety solutions to many of the world's top-recognized brands and companies. Our network of over 1,000 laboratories and offices in more than 100 countries delivers innovative and bespoke Assurance, Testing, Inspection and Certification (ATIC) solutions for our customers' operations and supply...

  • Production Specialist

    4 weeks ago

    Waukesha, Wisconsin, United States Eaton Full time

    Eaton's ES AMER ESS division is a leading manufacturer of voltage regulators, seeking a highly skilled Production Specialist to join their team in Waukesha, WI. The estimated salary for this position is $24.80 per hour, with an additional shift premium of $3.00 per hour, resulting in a total hourly compensation of $27.80.The core hours are 11pm - 7am, with...

  • Personal Lines Insurance Consultant

    4 weeks ago

    Waukesha, United States R&R Insurance and Wealth Management Full time

    Are you a proven insurance sales professional with a track record of selling to High Net Worth Personal Lines clients? Are you looking for an agency that will support you with marketing, client resources, and access to the top carriers in the industry?R&R Insurance Services, Inc. is one of the largest family owned independent agencies in the Midwest and we...