CNC Operator

3 weeks ago

Litchfield Park, United States AirBorn Full time

SUMMARY: Operates automated and manual equipment.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following:  Other duties may be assigned. 

  • Reads job specifications or work instructions to determine machine adjustments and material requirements. 
  • Sets stops or guides to specified length as indicated by scale, rule, or template, as required. 
  • Positions work piece against stops or aligns layout marks with die or blade. 
  • Locks pieces in place. 
  • Pushes button or depresses pedal to activate machine. 
  • Reports work piece defects or machine malfunction to working foreman. 
  • Makes minor adjustments. 
  • Measures work piece dimensions to determine accuracy of machine operation. 
  • Inspects parts per SPC requirements and charts when needed or required and enters into computer. 
  • Performs minor machine maintenance such as oiling machines, dies or work pieces. 
  • Operates hand tools to remove burrs, sharp edges, rust or scale from work piece. 
  • Assists in machine set up, and stacks, marks, packs, and transports finished work pieces. 

KNOWLEDGE, SKILLS, AND ABILITIES  Requires knowledge typically acquired through:

  • Completion of a high school diploma or general education degree (GED),
  • One to three years related experience or training; and/or equivalent combination of education and experience.
  • Ability to read and comprehend simple instructions, short correspondence, and memos. 
  • Ability to write simple correspondence. 
  • Ability to add and subtract two digit numbers and to multiply and divide with 10’s and 100’s.
  • Ability to comprehend simple decimals and fractions. 
  • Ability to understand and carry out detailed but uninvolved written or oral instructions. 
  • Ability to deal with problems involving a few concrete variables in standardized situations.
  • Ability to perform minor adjustments to tools and equipment. 
  • Ability to maintain tools and equipment utilized in assignments. 

QUALIFICATIONS  To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.  The requirements listed above are representative of the knowledge, skill and/or ability required.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

PHYSICAL DEMANDS  The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.  While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger, handle, or feel objects, tools, and controls, and reach with arms and hands. The employee may be required to regularly lift and/or move up to 10 pounds and occasionally lift and/or move from 25 to 50 pounds.  Specific vision abilities required by this job include close vision, depth perception and the ability to adjust focus.

WORK ENVIRONMENT  The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.  While performing the duties of this job, the employee regularly works near moving mechanical parts and is occasionally exposed to fumes or airborne particles, risk of electrical shock, and vibration.  The noise level in the work environment is usually moderate to loud.

[Equal Opportunity Employer - Disability/Vet]

This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.

  • CNC Operator

    3 weeks ago

    Highland Park, Illinois, United States Express Employment Full time

    Job OverviewWe are currently seeking a skilled CNC Operator to join our dynamic team. This position involves working with advanced CNC machinery to produce high-quality components.Compensation:Competitive hourly wage based on experience.Position Overview:As a CNC Operator, you will be responsible for the setup and operation of CNC milling machines or lathes....

  • CNC Operators

    2 months ago

    Baldwin Park, California, United States AtWork Group Full time

    A state-of-the-art CNC machine shop specializing in high-precision CNC turning, milling, grinding, and component part assemblies is looking for a CNC Set Up/Operator.This company is a leading supplier of machining and assembly services to the aerospace industry and is your one stop shop for all your complex machined components.Hours: 2: 30 PM - 11: 00 PM,...

  • CNC Lathe Operator

    3 weeks ago

    Machesney Park, United States Path Engineering Full time

    ```RoleAs a CNC Lathe Operator (also known as CNC Machine Operator, CNC Technician), you'll operate CNC lathes, interpret blueprints, and work in a manufacturing environment. You'll also be responsible for producing precision parts, maintaining high quality standards, and adhering to Lean Manufacturing Principles.BenefitsOpportunity to work with renowned...

  • CNC Lathe Operator

    3 weeks ago

    Machesney Park, United States Path Engineering Full time

    ```Role As a CNC Lathe Operator (also known as CNC Machine Operator, CNC Technician), you'll operate CNC lathes, interpret blueprints, and work in a manufacturing environment. You'll also be responsible for producing precision parts, maintaining high quality standards, and adhering to Lean Manufacturing Principles. Benefits Opportunity to work with renowned...

  • CNC Operator Specialist

    3 weeks ago

    Elmwood Park, New Jersey, United States Aegis Worldwide Full time

    Job OverviewPosition Title: CNC Operator SpecialistLocation: Elmwood Park, ILShift: 2nd shift: 4:00 p.m. – 12:30 a.m. with potential for overtimeRole Summary:Aegis Worldwide is seeking a proficient CNC Operator Specialist with extensive experience in the setup and operation of CNC lathes and mills, particularly with Duscon and Haas machinery. In this role,...

  • CNC Machine Operator

    3 weeks ago

    Waite Park, Minnesota, United States Jobot Full time

    CNC Machinist OpportunityA prominent Granite Manufacturing Firm is on the lookout for a proficient CNC Machinist to enhance their workforce. The successful applicant will possess at least 5 years of relevant experience in the manufacturing sector.Key Responsibilities:Configure and operate CNC machinery to manufacture high-precision components.Accurately...

  • Experienced CNC Operator

    2 weeks ago

    Waite Park, Minnesota, United States Jobot Full time

    CNC Machinist OpportunityA prominent Granite Manufacturing Company is in search of a proficient CNC Machinist to enhance their workforce. The successful applicant will possess at least 5 years of relevant experience in the manufacturing sector.Key Responsibilities:Configure and operate CNC machinery to manufacture high-precision components.Accurately...

  • CNC Programmer/Operator

    2 weeks ago

    Pinellas Park, Florida, United States iMPact Business Group Full time

    Job SummaryWe are seeking a highly skilled CNC Programmer/Operator to join our team at iMPact Business Group. As a key member of our manufacturing team, you will be responsible for programming and operating CNC turning centers, supervising a team of operators, and ensuring the highest quality standards are met.Key ResponsibilitiesDevelop and optimize...

  • CNC Machinist

    5 days ago

    Cedar Park, Texas, United States Aerotek Full time

    About the RoleAerotek is seeking a skilled CNC Machinist to join our team as a Production Operator. As a CNC Machine Operator, you will be responsible for operating machinery, performing maintenance, and monitoring output.Key ResponsibilitiesOperate CNC machinery to produce high-quality productsPerform routine maintenance and troubleshooting to ensure...

  • CNC Machining Operations Leader

    3 weeks ago

    Deer Park, New York, United States Jobot Full time

    CNC Machining Operations Leader Role Overview: We are a leading provider of precision-engineered mechanical components within the aerospace sector, committed to delivering exceptional quality and innovation. About Us: Our advanced manufacturing facility is designed to tackle complex engineering challenges while adhering to the highest industry standards. We...

  • CNC Machining Operations Supervisor

    3 weeks ago

    Deer Park, Texas, United States Jobot Full time

    CNC Machining Operations Supervisor - Aerospace Sector - Growth Opportunities - Comprehensive BenefitsThis Jobot Job is hosted by: Alexa HolzSalary: $80,000 - $120,000 per yearAbout Us:We are a reliable partner in delivering high-quality, precision-engineered mechanical components specifically for the aerospace sector. Our commitment to excellence drives us...

  • CNC Machine Operator

    1 week ago

    Comstock Park, Michigan, United States Commercial Tool Group Full time

    Join Our Team of Skilled MachinistsAbout UsCommercial Tool Group, a leading manufacturer of precision tools and dies, is seeking a highly motivated and detail-oriented CNC Machine Apprentice to join our team. As a CNC Machine Apprentice, you will play a critical role in the production of high-quality tools and dies, working closely with our experienced...

  • CNC Machining Operations Leader

    3 weeks ago

    Deer Park, New York, United States Jobot Full time

    About Jobot:Jobot is a leading entity in the aerospace sector, dedicated to crafting precision-engineered mechanical components. Our commitment to delivering superior quality parts aligns with the evolving demands of aviation and space exploration. We strive for innovation and excellence, bolstered by our advanced facility and talented workforce.Position:...

  • CNC Machining Operations Leader

    3 weeks ago

    Deer Park, Texas, United States Jobot Full time

    CNC Machining Operations Leader - Aerospace - Career Advancement Opportunities - Comprehensive BenefitsThis position is hosted by: JobotSalary: $80,000 - $120,000 per yearAbout Us:We are a reputable provider of high-quality, precision-engineered mechanical components tailored for the aerospace sector. Our commitment to excellence drives us to utilize...

  • CNC Operators

    4 months ago

    Baldwin Park, United States AtWork Group Full time

    A state-of-the-art CNC machine shop is looking for a CNC Set Up/Operator. Responsibilities:Set up Mills & Lathe Machines with a minimum of 5 years' experience.Proficient with Fanuc controls and operation of Mori-seki, Okuma, and/or Hass.Independently install tooling, ensuring setup within required times for each operation.Efficiently change tools and edit...

  • CNC Operators

    4 months ago

    Baldwin Park, United States AtWork Group Full time

    A state-of-the-art CNC machine shop is looking for a CNC Set Up/Operator. Responsibilities:Set up Mills & Lathe Machines with a minimum of 5 years' experience.Proficient with Fanuc controls and operation of Mori-seki, Okuma, and/or Hass.Independently install tooling, ensuring setup within required times for each operation.Efficiently change tools and edit...

  • CNC Machining Operations Leader

    3 weeks ago

    Deer Park, Texas, United States Jobot Full time

    Aerospace Manufacturing Supervisor - Career Advancement Opportunities - Comprehensive BenefitsThis Jobot Job is hosted by: Alexa HolzSalary: $80,000 - $120,000 per yearAbout Us:We are a leading provider of high-quality, precision-engineered mechanical components tailored for the aerospace sector. Our commitment to excellence drives us to utilize advanced...

  • CNC Operators

    4 months ago

    Baldwin Park, United States AtWork Group Full time

    A state-of-the-art CNC machine shop is looking for a CNC Set Up/Operator. Responsibilities:Set up Mills & Lathe Machines with a minimum of 5 years' experience.Proficient with Fanuc controls and operation of Mori-seki, Okuma, and/or Hass.Independently install tooling, ensuring setup within required times for each operation.Efficiently change tools and edit...

  • CNC Operators

    3 weeks ago

    Baldwin Park, United States AtWork Group Full time

    A state-of-the-art CNC machine shop is looking for a CNC Set Up/Operator.Responsibilities: Set up Mills & Lathe Machines with a minimum of 5 years' experience. Proficient with Fanuc controls and operation of Mori-seki, Okuma, and/or Hass. Independently install tooling, ensuring setup within required times for each operation. Efficiently change tools and edit...

  • CNC Machine Operator

    2 weeks ago

    Loves Park, Illinois, United States Professional Plastics Full time

    Job OverviewProfessional Plastics stands as a premier distributor of high-performance engineering plastic materials. With a diverse range of engineering plastics, composites, and technical ceramics, we have established a strong presence since our inception in 1984, now operating across multiple locations globally. As a family-owned business, we prioritize...