BA Entry/Welder Operator

4 weeks ago

Ghent, United States North American Stainless Full time

The position of BA Entry/Welder Operator is responsible for all operating functions as listed below. Operation of the BA Unit must be understood in total with the focus of utilizing the equipment to meet all the quality and productivity goals as outlined in our quality system. All work instructions must be followed as outlined.ESSENTIAL JOB FUNCTIONS:1.) Check schedule of coils to be run to insure all coils are in the bay. Load correct coil onto line.2.) Feed coil to shear, cut off leaderstrips, cut scrap to proper gauge, feed head of coil to welder. Enter leaderstrip data for each coil in AS400.3.) Weld coil to tail of preceding coil. This operation must be completed in an efficient manner so that the furnace operator is not required to slow the line speed down.4.) Communicate to the furnace operator the coil number running and observe for any incoming defects.5.) Monitor coils in line for steering and defects. Inspect the coils as they are exiting the degrease section for degrease effectiveness and surface defects. Enter all entry inspection notes into AS400 and communicate the entry inspection notes verbally to the shift leader/furnace operator.6.) Follow all prescribed safety rules. Complete safety training and safety observations monthly.7.) Housekeeping/maintenance work as assigned.8.) Any other jobs as assigned.9.) Fly in empty leaderstrip tables as needed and remove full tables.SUPPLEMENTAL JOB FUNCTIONS:1.) Other duties as assigned.2.) Participation in continuous improvement programs.MINIMUM EDUCATION, SKILLS AND EXPERIENCE:Minimum of a High School Degree or Equivalent (GED).PHYSICAL ABILITIES REQUIRED:1.) Mobility: Stand (stationary) - 15%, stand/walk - 45%, walking - 15%, sitting - 25%.2.) Strength and Agility: Lifting - occ. 75#, carrying - occ. 150 Ft., push/pull - occ. 75#, climbing - occ., balancing - occ., bending - occ., stooping - occ., crouching - occ., kneeling - occ., crawling - occ., running - occ., twisting - occ., turning - occ.3.) Dexterity: Grasping (firm/strong), finger dexterity/handling, reaching.HEALTH AND SAFETY1.) Work in compliance with the Occupational Health and Safety Act and regulations.2.) Follow Company safety rules.3.) Report the absence of or defect in any protective equipment or clothing to the Supervisor or Manager immediately.4.) Mobility in plant5.) Ability to lift at least 50 lbs6.) Visual ability with or without correction7.) Communication abilities8.) Ability to work a rotating shift (rotating from days to night on a weekly or bi-weekly schedule).9.) Use or wear the equipment, protective devices or clothing that is required to be used or worn:Safety shoesSafety glassesHearing protection10.) Report to the Safety Coordinator, Group Lead or Supervisor any contravention of the Occupational Health and Safety Act and Regulations or Company policy.11.) Must follow all Lock out Tag out (LOTO) guidelines for designated machines.12.) Maintain a clean and safe work area.WORK ENVIRONMENT: Work in compliance with the Occupational Health and Safety Act and regulations. Clean, well ventilated and safe work areas.

  • BA Entry/Welder Operator

    4 weeks ago

    Ghent, United States North American Stainless Full time

    Job DescriptionJob DescriptionThe position of BA Entry/Welder Operator is responsible for all operating functions as listed below. Operation of the BA Unit must be understood in total with the focus of utilizing the equipment to meet all the quality and productivity goals as outlined in our quality system. All work instructions must be followed as...

  • AP Entry/Welder Operator

    1 month ago

    Ghent, United States North American Stainless Full time

    Job DescriptionJob DescriptionGENERAL JOB DESCRIPTION:This position of AP Cold (Exit/Trim) Operator is responsible for all operating functions as listed below. Operation of the AP Cold Unit must be understood in total with the focus of utilizing the equipment to meet all the quality and productivity goals as outlined in our quality system. All work...

  • Pipe Welder

    3 days ago

    Ghent, United States Industrial Trade Services Full time

    Job DescriptionJob DescriptionPipe Welder$32 per hourGhent, KYJOURNEYMAN WELDER RESPONSIBILITIES- Selects type and size of pipe or other related materials and equipment according to specifications.- Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding...

  • 2nd Shift Aluminum Welder

    2 weeks ago

    Ghent, United States ResourceMFG Full time

    summary Remedy is Hiring for An Aluminum Welder right here in Jacksonville, FL located on the Southside. 2nd shift: 5:00PM- 1:30AM Monday-Friday Paying $17-$21/Hr. Depending on experience. Products Fitter/MIG Welder Job Responsibilities and Requirements Safety conscious and familiar with standard safety rules and policies Good communication and team working...

  • Combo Welder

    3 days ago

    Ghent, United States Industrial Trade Services Full time

    Job DescriptionJob DescriptionPipe WelderGhent, KY$30-$32 per hourJOURNEYMAN WELDER RESPONSIBILITIES- Selects type and size of pipe or other related materials and equipment according to specifications.- Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and...

  • CM Crane Operator

    1 month ago

    Ghent, United States North American Stainless Full time

    Job DescriptionJob Description all operating function of all cranes located in the Cold Mill. Operation of the crane must be understood in total with the focus of utilizing the equipment to meet all the quality and productivity goals as outlined in our quality system. All work instructions must be followed as outlined. Know potential hazards for each task by...

  • Forklift Operator

    5 days ago

    Ghent, United States ResourceMFG Full time

    summary ResourceMFG is immediately hiring for Forklift Operator Entry Level Location: Lafayette, IN Shift:6:00am-6:00pm OR 6:00pm-6:00am Pay starts:$17.50-$18.38, potential for raises at 90 and 120 days Training Required on 8-hour days for up to 6 weeks (7am-4pm) Work Environment: Safety first, Quality over Quantity Job Summary: Work with SAP system when...

  • AP Exit Operator

    2 months ago

    Ghent, United States North American Stainless Full time

    Job DescriptionJob DescriptionThe position of AP3 vacation coverage operator is responsible for all operating functions as listed below. Operation of the AP3 Unit must be understood in total with the focus of utilizing the equipment to meet all the quality and productivity goals as outlined in our quality system. All work instructions must be followed as...

  • Pickling Exit Operator

    4 days ago

    Ghent, United States North American Stainless Full time

    Job DescriptionJob DescriptionGENERAL JOB DESCRIPTION:The Pickling Exit Operator is responsible for all the functions as listed below. Operation of this area must be understood in total with the focus of utilizing the equipment to meet all the quality and productivity goals as outlined in our quality system. All work instructions are to be followed as...

  • Journeyman Pipefitter

    1 month ago

    Ghent, United States Industrial Trade Services Full time

    Job DescriptionJob DescriptionPipefitterGhent, KY$32 per hourFitting stainless steel pipe for tig welders. Must have at least 5 years of fitting experience.ResponsibilitiesRead and understand P&ID’s and isometric drawings to determine the scope of work, locations, quantities, and sizes of materials required.Layout, fabricate, and install pipe spools from...

  • HM Floor Operator

    3 days ago

    Ghent, United States North American Stainless Full time

    Job DescriptionJob DescriptionThe position of Mill Floor Operator is responsible for theoperation of all Furnace Delivery, Roughing Mill, Finishing Mill,down coiler and plate line equipment at the floor level in orderto obtain the proper levels of quality and productivity. Thisposition is also responsible for monitoring the rolling processand the auxiliary...

  • Mech Mtn Project Eng

    4 days ago

    Ghent, United States North American Stainless Full time

    Job DescriptionJob DescriptionGENERAL JOB DESCRIPTION:This position is responsible for providing professional mechanical engineering service andtechnical support to Maintenance and Operation departments for the re-design, modification, reengineering and retro-fitting of machinery and equipment to improve quality and productivity.ESSENTIAL JOB FUNCTIONS:1....

  • Mech Mtn Eng Z-Mills

    3 weeks ago

    Ghent, United States North American Stainless Full time

    Job DescriptionJob DescriptionGENERAL JOB DESCRIPTION:This position is responsible for providing professional Mechanical Engineering service and technical support to Maintenance and Operation departments for the re- design, modification, re-engineering and retro-fitting of machinery and equipment to improve quality and productivity.ESSENTIAL JOB FUNCTIONS:...

  • Elec Mtn Eng AP3

    1 month ago

    Ghent, United States North American Stainless Full time

    Job DescriptionJob DescriptionGENERAL JOB DESCRIPTION:This position is responsible for providing professional Electrical Engineering service and technical support to Maintenance and Operation departments for the re-design, modification, re-engineering and retro-fitting of electrical equipment to improve quality and productivity. Assists Maintenance...

  • Electrical Maintenance Engineer

    5 days ago

    Ghent, United States North American Stainless Full time

    Job DescriptionJob DescriptionGENERAL JOB DESCRIPTION:This position is responsible for providing professional Electrical Engineering service and technical support to Maintenance and Operation departments for the re-design, modification, re-engineering and retro-fitting of electrical equipment to improve quality and productivity. Assists Maintenance...

  • QC Engineer

    4 weeks ago

    Ghent, United States North American Stainless Full time

    Job DescriptionJob DescriptionGENERAL JOB DESCRIPTION:This position is responsible for providing professional quality engineering service and technical support involvingtechnical quality, in-process quality, and customer service. Supports NAS total quality program to improve cost,productivity, yields and customer requirements.The QC Engineer be involved in...