Machinist-Swiss-1st Shift

2 months ago

Minneapolis, United States Integer Holdings Corporation Full time

By living according to a common set of values, we create a culture that unifies, embraces the uniqueness we all bring to the company, and positions Integer for long-term success.At Integer, our values are embedded in everything we do.Customer We focus on our customers' successInnovation We create better solutionsCollaboration We create success togetherInclusion We always interact with others respectfullyCandor We are open and honest with one anotherIntegrity We do the right things and do things rightThe primary purpose the Machinist is to set up, operate, and maintain CNC equipment to manufacture precision parts. Accountabilities & Responsibilities:
Adheres to Integer Values and all safety, environmental, security and quality requirements including, but not limited to: Quality Management Systems (QMS), Safety, Environmental and Security Management Systems, U.S. Food and Drug Administration (FDA) regulations, company policies and operating procedures, and other regulatory requirements.
Operates and sets up CNC shop equipment with minimal assistance.
Accountable for meeting cycle time and yield expectations.
Ability to simultaneously operate more than one machine as required.
Sharpens and changes tooling as needed to maintain tolerances, may give input or recommendations.
Makes offset adjustments and monitors assigned equipment to ensure dimensional part integrity.
Able to preset tooling for setups and tool breakages during normal operations.
Maintains tooling following established tool life management guidelines.
Troubleshoots and corrects problem with minimal assistance.
Deburrs, buffs or sands parts to meet requirements to print specifications as required.
Verifies the revision level for documentation.
Completes and verifies all applicable documentation for accuracy.
Visually and/or dimensionally inspects parts with the aid of a microscope and/or completed product for conformance to specifications. Identifies and escalates quality non-conformances. Required to follow quality procedures to ensure traceability and segregation of materials as required.
Practices lean manufacturing principles daily.
Perform preventative machine maintenance as required.
Expands skill base through on-the-job training, cross training, job rotations, and classroom instruction.
Participates in team activity focusing on continuous improvement initiatives.
Performs other duties as assigned.

Education & Experience:
Minimum Education: High school graduate or equivalent. Technical degree or certification preferred.
Minimum Experience: In lieu of preferred education, a minimum of 3 years CNC machining experience in all phases.

Knowledge & Skills: Special Skills: Ability to read in English, interpret and understand blueprints and GD&T. Ability to work with small precision parts to close tolerances of +/- 0.0002. Capability to use basic inspection tools and techniques. Capacity to understand and follow through with verbal or written instructions. Ability to perform basic math calculations as it pertains to machining. Effective communication skills.
U.S. Applicants: EOE/AA Disability/Veteran

  • Swiss CNC Machinist

    2 weeks ago

    Minneapolis, United States RMS Company Full time

    Overview: About rms Company rms Company provides contract manufacturing of high-quality, tight-tolerance medical implants, components and sub-assemblies using cutting-edge technology. rms is part of the Cretex Medical family of companies. Learn more at www.rmsmachining.com and www.cretexmedical.com. Swiss CNC Machinist Position Summary The Swiss CNC...

  • CNC Machinist

    1 week ago

    Minneapolis, United States Platinum Staffing Full time $24 - $30

    Job DescriptionJob DescriptionCNC Machinists – Mills, Lathes, and Swiss Operator/Set-UpLocation: Saint Paul & Minneapolis AreaShifts Available: 1st, 2nd, and WeekendWe are partnering with top machine shops in the Saint Paul and Minneapolis area to fill CNC Machinist positions across various shifts. These are direct hire opportunities, offering great pay...

  • Machinist - 2nd Shift

    1 week ago

    Minneapolis, United States Electric Machinery Company LLC Full time

    ELECTRIC MACHINERY COMPANY, INC., a division of WEG Electric Corp.Minneapolis, MinnesotaPosition: Machinist - 2nd ShiftTeam: MachiningPrimary Objective of Position:A Machinist is responsible for the setup and operation of CNC and manual machining equipment. A Machinist works within close tolerance requirements to create high quality parts, adhering to safety...

  • Machinist - 2nd Shift

    3 months ago

    Minneapolis, United States ELECTRIC MACHINERY COMPANY LLC, a division of WEG Full time

    Job DescriptionJob DescriptionDescription:ELECTRIC MACHINERY COMPANY, INC., a division of WEG Electric Corp.Minneapolis, MinnesotaPosition: Machinist - 2nd ShiftTeam: MachiningPrimary Objective of Position:A Machinist is responsible for the setup and operation of CNC and manual machining equipment. A Machinist works within close tolerance requirements to...

  • Machinist

    2 weeks ago

    Minneapolis, United States ResourceMFG Full time

    summary In this role you will use Cincinnati CNC machines, similar to Haas / need programming experience, edit, modify programs, blueprints. Benefits of a Machinist: Direct hire 1st shift 7AM - 3:30PM Monday - Friday Small, family owned business with long-standing reputation Medical covered at 90% Uniforms, no steel toes required 40 hours or vacation time...

  • Precision Swiss CNC Operator

    1 week ago

    Minneapolis, Minnesota, United States rms Company Full time

    Overview:About rms Companyrms Company specializes in contract manufacturing of high-precision, tight-tolerance medical implants, components, and sub-assemblies utilizing advanced technology. As a member of the Cretex Medical family, rms is committed to excellence in the medical device sector. Learn more at (url removed) and (url removed).Swiss CNC Operator...

  • Machinist - 1st shift

    2 months ago

    Minneapolis, United States Integer Holdings Corporation Full time

    By living according to a common set of values, we create a culture that unifies, embraces the uniqueness we all bring to the company, and positions Integer for long-term success.At Integer, our values are embedded in everything we do.Customer We focus on our customers' successInnovation We create better solutionsCollaboration We create success...

  • EDM Machinist

    3 months ago

    Minneapolis, United States Andrew Tool & Machining Company Full time

    Job DescriptionJob DescriptionDescription:Approved: Job DescriptionJob Title: EDM level 4 (1st shift)Reports To: Operations ManagerStatus: Full Target Pay Range: $28-36Job SummaryEDM machinist level 4 will efficiently make quality conforming product by efficient application of work holding, machine tool setup and offset adjustments.Essential Functions:The...

  • Machinist - Horizontal CNC Mill (2nd shift)

    3 months ago

    Minneapolis, United States ELECTRIC MACHINERY COMPANY LLC, a division of WEG Full time

    Job DescriptionJob DescriptionDescription:ELECTRIC MACHINERY COMPANY, INC., a division of WEG Electric Corp.Minneapolis, MinnesotaPosition: Machinist - 2nd ShiftTeam: MachiningPrimary Objective of Position:A Machinist is responsible for the setup and operation of CNC and manual machining equipment specifically for our Horizontal CNC Mill machine. A Machinist...

  • Machinist - Horizontal CNC Mill (2nd shift)

    1 week ago

    Minneapolis, United States Electric Machinery Company LLC Full time

    ELECTRIC MACHINERY COMPANY, INC., a division of WEG Electric Corp.Minneapolis, MinnesotaPosition: Machinist - 2nd ShiftTeam: MachiningPrimary Objective of Position:A Machinist is responsible for the setup and operation of CNC and manual machining equipment specifically for our Horizontal CNC Mill machine. A Machinist works within close tolerance requirements...

  • Machinist - Horizontal CNC Mill (2nd shift)

    3 months ago

    Minneapolis, United States ELECTRIC MACHINERY COMPANY LLC, a division of WEG Full time

    Job DescriptionJob DescriptionDescription:ELECTRIC MACHINERY COMPANY, INC., a division of WEG Electric Corp.Minneapolis, MinnesotaPosition: Machinist - 2nd ShiftTeam: MachiningPrimary Objective of Position:A Machinist is responsible for the setup and operation of CNC and manual machining equipment specifically for our Horizontal CNC Mill machine. A Machinist...

  • Machinist Specialist

    3 hours ago

    Minneapolis, Minnesota, United States Park Precision Machining Full time

    Job SummaryMachinist SpecialistPark Precision Machining is seeking a highly skilled Machinist Specialist to join our team. As a Machinist Specialist, you will be responsible for machining products to meet customer specifications.Key ResponsibilitiesMachine Operation: Set up and operate vertical mills, ensuring accurate and efficient production.Programming...

  • Milling Machinist

    2 weeks ago

    Minneapolis, United States Park Precision Machining Full time

    Job DescriptionMilling machinist  This machinist is responsible for machining products to meet the customer's specifications. Operation and set up would include program, editing, selection and installing tooling, fixtures and transferring programs. Gibbs CAM or Surfcam experience preferred. Our work environment is clean with a focus on safety. Required...

  • Lathe Machinist

    2 weeks ago

    Minneapolis, United States Park Precision Machining Full time

    Job DescriptionLathe Machinist  This machinist is responsible for machining products to meet the customer's specifications. Operation and set up would include program, editing, selection and installing tooling, fixtures and transferring programs. Our work environment is clean with a focus on safety. Required Skills Good at setting up lathes. Multiple set...

  • Machinist - 2nd Shift

    2 weeks ago

    Minneapolis, United States Plymouth Industries Inc Full time

    Job Type Full-timeDescription PRESERVE •PROTECT •PROVIDE At Plymouth Industries, Inc. we work to preserve roadways, protect people, and provide reliable rooftops Flexible shift schedulesGenerous vacation/paid time offExcellent benefits package401(k) with matchProfit sharing eligibleOVERVIEWAt Plymouth Industries, Inc., our team matters most to us. We...

  • Milling Machinist

    2 months ago

    Minneapolis, United States Park Precision Machining Full time

    Job DescriptionMilling machinist This machinist is responsible for machining products to meet the customer's specifications. Operation and set up would include program, editing, selection and installing tooling, fixtures and transferring programs. Gibbs CAM or Surfcam experience preferred. Our work environment is clean with a focus on safety.Required...

  • CNC Machinist Technician

    2 weeks ago

    Minneapolis, Minnesota, United States Award Staffing Full time

    About the Role:Position: CNC Machinist Set Up OperatorCompensation: $68,000/YearLocation: Minneapolis, MNWork Schedule: 1st Shift, Monday to Thursday, 6 AM - 4:30 PM with optional overtime.Key Responsibilities:Conduct all assigned machining operations safely and responsibly.Efficiently load and unload raw materials into CNC machinery.Set up and calibrate CNC...

  • Lathe Machinist

    2 months ago

    Minneapolis, United States Park Precision Machining Full time

    Job DescriptionLathe Machinist This machinist is responsible for machining products to meet the customer's specifications. Operation and set up would include program, editing, selection and installing tooling, fixtures and transferring programs. Our work environment is clean with a focus on safety.Required SkillsGood at setting up lathes. Multiple set...

  • Machinist - 2nd Shift

    2 weeks ago

    Minneapolis, United States Plymouth Industries Inc Full time

    Job Type Full-time Description PRESERVE •PROTECT •PROVIDE At Plymouth Industries, Inc. we work to preserve roadways, protect people, and provide reliable rooftops Flexible shift schedules Generous vacation/paid time off Excellent benefits package 401(k) with match Profit sharing eligible OVERVIEW At Plymouth Industries, Inc., our team matters most to...

  • CNC Swiss Programmer

    3 weeks ago

    Minneapolis, Minnesota, United States Arch Full time

    SummaryOperates and maintain CNC equipment. As a CNC programmer, you will be responsible for reading and interpreting technical blueprints, inputting the design specifications, adjusting the machine cutting paths, and performing quality checks on the final product. You may also be required to troubleshoot any machine issues that arise during the...