Manufacturing Tech II

3 days ago

Mesa, United States Special Devices, Inc. Full time
Job DescriptionJob DescriptionSUMMARY

The Manufacturing Engineering Technician II (MET2) performs all aspects of automated manufacturing equipment repair, troubleshooting, calibration, and preventative maintenance procedures on equipment. This position also assists engineers in developing and refining manufacturing processes. The MET2 must be able to work effectively under limited supervision. This position reports to Manufacturing Engineering Technical Group Supervisor.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

  • Follow standard OSHA and company specific safety procedures and protocols
  • Troubleshoot automation systems including electrical, mechanical, pneumatic, vacuum, VFD, and hydraulic
  • Use CMMS system to record and investigate maintenance history
  • Understand and create instructions including preventive maintenance and operating procedures
  • Monitor and correct equipment faults in real-time to ensure high production performance; troubleshoot automation systems
  • Perform preventative and breakdown maintenance and inspection activities
  • Uses the PLC to diagnosis and troubleshoot electronic devices
  • Read and redline mechanical drawings; use power and hand mechanical tools and test equipment
  • Replace both servo and stepper motors, diagnose motor drive systems
  • Install and maintain equipment with circuits up to 480 volts; Install, repair, replace wiring including low voltage I/O, dedicated cable sets, and control panels; Interpret schematics for troubleshooting; Understand common industrial electrical components

EDUCATION and/or EXPERIENCE

Minimum educational requirements include a technical degree or certificate. Minimum experience includes 3 years manufacturing experience preferably in a high-volume, applicable industry. Working knowledge of PLC’s inputs and outputs, pneumatic adjustments, common engineering testing procedures (DOE’s, PFMEA’s, etc.), engineering documentation and reports.

QUALIFICATIONS

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions.

The individual must be able to work effectively and professionally with all levels of employees and management in a team oriented environment. The individual in this position must be able to understand all policies, procedures, instructions, rules and regulations (including all safety training and safety information) associated with this position that are written in English. In addition, the individual must be able to appropriately respond to these and, where needed, provide reports, presentations, information and communications in English. Must be available to work days, evenings, or weekends, overtime as required.

REASONING ABILITY

Must possess the ability to read, comprehend, and interpret complex data, drawings, schematics, to design and

implement new equipment or planning new experiments. Requires interpretation of complex data for designing new devices or planning new experiments.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly exposed to lighting and temperature as required for the office and manufacturing areas. Appropriate safety equipment is required by area. There is potential exposure to hazardous chemicals. A considerable amount of moving from department to department may occur in unfavorable weather conditions. The employee is exposed to the inherent dangers of the explosive materials used in DSSA, Inc. manufacturing processes.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to move throughout the facility, traverse within production areas, communicate with others, and detect or exchange information or ideas. The employee occasionally is required to perform functions which require the manual operation of both general office productivity and test equipment as well as the ability to place, reach, detect, ascend/descend, and position self to navigate within confined working spaces. The employee is frequently required to remain in a stationary position. The employee must occasionally move or transport up to 50 pounds. Specific vision abilities required by this job include close inspection, identification of objects from a distance, color determination, peripheral detection, depth judgment, and the ability to identify details in varying conditions.

Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. This position description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the position change.

  • Manufacturing Engineering Tech II

    4 months ago

    Mesa, United States Special Devices, Inc. Full time

    Job DescriptionJob DescriptionSUMMARYThe Manufacturing Engineering Technician II (MET2) performs all aspects of automated manufacturing equipment repair, troubleshooting, calibration, and preventative maintenance procedures on equipment. This position also assists engineers in developing and refining manufacturing processes. The MET2 must be able to work...

  • Manufacturing Engineering Tech II

    4 months ago

    Mesa, United States Special Devices, Inc. Full time

    Job DescriptionJob DescriptionShifts Available -5:30 AM - 6PM5:30 PM to 6 AMSUMMARYThe Manufacturing Engineering Technician II (MET2) performs all aspects of automated manufacturing equipment repair, troubleshooting, calibration, and preventative maintenance procedures on equipment. This position also assists engineers in developing and refining...

  • Manufacturing Engineering Tech II

    4 months ago

    Mesa, United States Daicel Safety Systems Full time

    Job DescriptionJob DescriptionShifts Available: 2ndSUMMARYThe Manufacturing Engineering Technician II (MET2) performs all aspects of automated manufacturing equipment repair, troubleshooting, calibration, and preventative maintenance procedures on equipment. This position also assists engineers in developing and refining manufacturing processes. The MET2...

  • Manufacturing Technician II

    10 hours ago

    Mesa, Arizona, United States Special Devices, Inc. Full time

    Job SummaryThe Manufacturing Engineering Technician II (MET2) plays a crucial role in ensuring the smooth operation of automated manufacturing equipment. This position involves troubleshooting, calibration, and preventative maintenance procedures to optimize equipment performance. The MET2 will also assist engineers in developing and refining manufacturing...

  • Sheetmetal Tech II

    3 weeks ago

    Mesa, United States Gulfstream Aerospace Corporation Full time

    Sheetmetal Tech II in  GAC Mesa Unique Skills: P145 MRO structures/sheetmetal repair and maintenance experience or military aviation structures/sheetmetal repair and maintenance experience preferred     Education and Experience Requirements High School Diploma or GED required. 2 years experience of sheetmetal and/or fabrication...

  • Interior Install Tech II

    2 weeks ago

    Mesa, United States Gulfstream Aerospace Corporation Full time

    Interior Install Tech II in  GAC Mesa Unique Skills: Previous experience with corporate or Gulfstream aircraft interiors desired.     Education and Experience Requirements High School Diploma or GED required. 2 years of applicable installation, fabrication or related experience. Experience in aerospace industry preferred.. Position...

  • Manufacturing Engineering Technician II

    3 weeks ago

    Mesa, Arizona, United States Special Devices, Inc. Full time

    Job SummaryWe are seeking a highly skilled Manufacturing Engineering Technician II to join our team at Special Devices, Inc. This individual will be responsible for performing all aspects of automated manufacturing equipment repair, troubleshooting, calibration, and preventative maintenance procedures on equipment.Key ResponsibilitiesEquipment Repair and...

  • Sheetmetal Tech II

    3 weeks ago

    Mesa, United States Gulfstream Aerospace Corporation Full time

    Sheetmetal Tech II in  GAC Mesa Unique Skills: P145 MRO structures/sheetmetal repair and maintenance experience or military aviation structures/sheetmetal repair and maintenance experience preferred     Education and Experience Requirements High School Diploma or GED required. 2 years experience of sheetmetal and/or fabrication...

  • Interior Install Tech II

    2 weeks ago

    Mesa, United States Gulfstream Aerospace Corporation Full time

    Interior Install Tech II in  GAC Mesa Unique Skills: Previous experience with corporate or Gulfstream aircraft interiors desired.     Education and Experience Requirements High School Diploma or GED required. 2 years of applicable installation, fabrication or related experience. Experience in aerospace industry preferred.. Position...

  • Manufacturing Engineering Tech II-1st shift-5am-3:30pm

    4 months ago

    Mesa, United States Special Devices, Inc. Full time

    Job DescriptionJob DescriptionSUMMARYThe Manufacturing Engineering Technician II (MET2) performs all aspects of automated manufacturing equipment repair, troubleshooting, calibration, and preventative maintenance procedures on equipment. This position also assists engineers in developing and refining manufacturing processes. The MET2 must be able to work...

  • Sheetmetal Tech II

    2 weeks ago

    Mesa, AZ, United States Gulfstream Aerospace Corporation Full time

    Sheetmetal Tech II in GAC Mesa Unique Skills: P145 MRO structures/sheetmetal repair and maintenance experience or military aviation structures/sheetmetal repair and maintenance experience preferred   Education and Experience Requirements High School Diploma or GED required. 2 years experience of sheetmetal and/or fabrication experience. Valid...

  • Interior Install Tech II

    2 weeks ago

    Mesa, AZ, United States Gulfstream Aerospace Corporation Full time

    Interior Install Tech II in GAC Mesa Unique Skills: Previous experience with corporate or Gulfstream aircraft interiors desired.   Education and Experience Requirements High School Diploma or GED required. 2 years of applicable installation, fabrication or related experience. Experience in aerospace industry preferred.. Position Purpose : The...

  • Interior Install Tech II

    6 days ago

    Mesa, AZ, United States Gulfstream Aerospace Corporation Full time

    Interior Install Tech II -in -GAC Mesa Unique Skills: Previous experience with corporate or Gulfstream aircraft interiors desired. - - Education and Experience Requirements High School Diploma or GED required. 2 years of applicable installation, fabrication or related experience. Experience in aerospace industry preferred.. Position...

  • Manufacturing Tech I

    5 days ago

    Mesa, United States Special Devices Full time

    SUMMARYThe Manufacturing Engineering Technician I (MET I) supports all aspects of automated manufacturing equipment set up, calibration, and preventative maintenance procedures on production equipment. The MET I assists in all aspects of the day to day maintenance support of the production areas. The MET I works under direct supervision. This position...

  • Manufacturing Tech I

    3 days ago

    Mesa, United States Special Devices, Inc. Full time

    Job DescriptionJob DescriptionSUMMARYThe Manufacturing Engineering Technician I (MET I) supports all aspects of automated manufacturing equipment set up, calibration, and preventative maintenance procedures on production equipment. The MET I assists in all aspects of the day to day maintenance support of the production areas. The MET I works under direct...

  • Mobile Diesel Technician II

    5 days ago

    Mesa, Arizona, United States Fleet Services by Cox Automotive Full time

    Fleet Services by Cox Automotive: A Leader in Mobile Maintenance and RepairWe are seeking a highly skilled Mobile Diesel Technician II to join our team at Fleet Services by Cox Automotive. As a leading provider of on-site mobile maintenance and repair services nationwide, we offer a unique opportunity for individuals to work with a variety of vehicles and...

  • Logistics Coordinator II

    2 weeks ago

    Mesa, Arizona, United States Special Devices Full time

    Job SummaryWe are seeking a highly skilled Logistics Coordinator II to join our team at Special Devices. The successful candidate will be responsible for coordinating and executing logistics operations, ensuring timely and efficient delivery of goods to customers, suppliers, and testing facilities.Key ResponsibilitiesCoordinate and prepare shipments,...

  • Avionics/Electrical Technician II

    3 days ago

    Mesa, Arizona, United States Gulfstream Aerospace Corporation Full time

    Job SummaryGulfstream Aerospace Corporation is seeking a highly skilled Avionics/Electrical Technician II to join our team. As a key member of our maintenance team, you will be responsible for providing technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact.This is a full-time...

  • Logistics Coordinator II

    3 weeks ago

    Mesa, Arizona, United States Special Devices Full time

    Job SummaryWe are seeking a highly skilled Logistics Coordinator II to join our team at Special Devices. The successful candidate will be responsible for coordinating the packaging, labeling, and preparation of shipments, as well as ensuring compliance with regulatory requirements.Key ResponsibilitiesCoordinate the packaging, labeling, and preparation of...

  • Avionics/Elec Tech II, Mesa, Arizona, 3137

    1 month ago

    Mesa, United States Aviation Technology Associates, LLC Full time

    Aviation Technology Associates (AVTECH) is looking for an Avionics/Elec Tech II in Mesa, AZ Position Purpose: Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and...