CultureStaff | Sheet Metal Bench Mechanic | phoenix, az

2 days ago

phoenix, United States CultureStaff Full time


Duties and Responsibilities: Include the following; other duties may be assigned.

  • Prepare and operate Press Brakes, Single Stroke punch presses, multi-station drill machines, saws, notchers, air powered grinders, drill motors, and hand tools to fabricate straighten and adjust detail parts and complex assemblies per drawing and work instructions for that operation.
  • Observe machine or process operation and measure parts in accordance with instructions using defined inspection media.
  • Stops machine or process and notifies supervisor when the parts do not conform to specifications.
  • Adjust machine and tool settings under minimal supervision to obtain specified results
  • Perform work in all areas of shop as designated by supervision on an as needed basis.
  • Maintain a clean work area following 5S methodologies.


Education and Experience: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.

  • High School diploma or GED; 0-2 years of demonstrated experience for Level 1 SMB Operator, 2-5 years of demonstrated experience for Level 2 SMB Operator, 5 or more years of demonstrated experience for Level 3 SMB Operator.
  • Acceptable interpretation of drawings and work orders as demonstrated at job interview.
  • Minimum vision requirements: Near and far vision of 20/30 in both eyes (corrected)
  • Manual dexterity to handle small delicate parts and hand held standard measuring equipment at the same time.



Sheet Metal Bench Operator

Experience

Expected Specialized Training

Knowledge, Skills, and Abilities

Level 1

Demonstrates the experience of 0-2 years in a position or specialization

·        Height gage

·        Digital Calipers

·        Pi tape

·        Micrometers

·        Polishing/DeBurr

·        Bench Grinder

·        Bead Blaster

·        Disc Sander

·        Belt Sander

·        Entry level position with little or no prior relevant work experience

·        Acquires basic skills to perform routine entry level operator tasks to operate

·        Work is prescribed and completed with little autonomy

·        Works with either close supervision or under clearly defined procedures

Level 2

Demonstrates 2-5 years of experience in position or specialization

All Level 1 specialized training in addition to:

·        Kick Press

·        Arbor Press

·        Omera

·        Stripit

·        Auto Roller

·        Hand Roller

·        Rivet Machine

·        Has developed knowledge and skills through training or considerable work experience

·        Works within established procedures with a moderate degree of supervision

·        Identifies the problem and all relevant issues in straightforward situations, assesses each using standard procedures, and makes sound decisions.

·        Must be capable of running the majority of jobs in the department.

Level 3

Demonstrates 5 or more years of experience in position or specialization

All level 1 and 2 specialized training in addition to:

·        Expander

·        Notcher

·        Lg Press Brake

·        Sm Press Brake

·        Milling Machine

·        Rivet Machine

·        Whiting Roll

·        Has developed specialized skills or is multi-skilled through job-related training and considerable on-the-job experience

·        Completes work with a limited degree of supervision

·        Likely to act as an informal resource for training new department operators.

·        Must be capable of running all jobs in the department.


Physical Demands: The physical demands described here are representative of those that must be met by an employee successfully perform essential functions of this job with or without reasonable accommodation.

  • While performing the duties of this job, the employee is regularly required to talk, hear, sit, use hands to finer, handle or feel. The employee is frequently required to reach with hands and arms, walk, sit, stoop, kneel, crouch, or crawl.
  • The employee is occasionally exposed to fumes or airborne particles, toxic, or caustic chemicals.
  • The noise level in the work environment is usually moderate.
  • Must be able to lift and or move up to 50lbs.

·        Ability to drive and operate a Forklift.




  • Sheet Metal Bench Mechanic

    4 days ago

    Phoenix, United States CultureStaff Full time

    Duties and Responsibilities: Include the following; other duties may be assigned. Prepare and operate Press Brakes, Single Stroke punch presses, multi-station drill machines, saws, notchers, air powered grinders, drill motors, and hand tools to fabricate straighten and adjust detail parts and complex assemblies per drawing and work instructions for that...

  • Sheet Metal Bench Mechanic

    2 weeks ago

    phoenix, United States CultureStaff Full time

    Duties and Responsibilities: Include the following; other duties may be assigned.Prepare and operate Press Brakes, Single Stroke punch presses, multi-station drill machines, saws, notchers, air powered grinders, drill motors, and hand tools to fabricate straighten and adjust detail parts and complex assemblies per drawing and work instructions for that...

  • Sheet Metal Bench Mechanic

    2 weeks ago

    Phoenix, United States CultureStaff Full time

    Duties and Responsibilities: Include the following; other duties may be assigned.Prepare and operate Press Brakes, Single Stroke punch presses, multi-station drill machines, saws, notchers, air powered grinders, drill motors, and hand tools to fabricate straighten and adjust detail parts and complex assemblies per drawing and work instructions for that...

  • Sheet Metal Bench Mechanic

    2 weeks ago

    Phoenix, United States CultureStaff Full time

    Duties and Responsibilities: Include the following; other duties may be assigned.Prepare and operate Press Brakes, Single Stroke punch presses, multi-station drill machines, saws, notchers, air powered grinders, drill motors, and hand tools to fabricate straighten and adjust detail parts and complex assemblies per drawing and work instructions for that...

  • CultureStaff | Welder | phoenix, az

    2 days ago

    phoenix, United States CultureStaff Full time

    Summary: Weld sheet metal components together with Tig and fusion gas welding equipment to fabricate sheet metal/machine parts by performing the following duties.Duties and Responsibilities: Include the following; other duties may be assigned.Welds metal parts together using both gas welding and any combination of arc welding processes.Performs related...

  • Sheet Metal Foreman

    3 months ago

    Phoenix, United States KODIAK Construction Recruiting & Staffing Full time

    SHEET METAL FOREMAN – PHOENIX, AZClient BenefitsCompetitive salary and benefits packageCareer growth and professional development401(k) with employer matchingMedical, Dental, Vision, Short-term, Long-term, Life Insurance, PTO, etc.What You Will Be DoingAre you a seasoned Sheet Metal Foreman with a passion for leading dynamic teams in the construction...

  • Sheet Metal Foreman SIGN ON BONUS

    2 months ago

    Phoenix, United States HACI Mechanical Contractors, Inc. Full time

    Job DescriptionJob DescriptionHVAC Sheet metal installers plan, lay out, fabricate, assemble, and install sheet metal duct work and related accessories and equipment. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer;...

  • Commercial Sheet Metal Shop Ductwork Builders

    2 months ago

    Phoenix, United States HACI Mechanical Contractors, Inc. Full time

    Job DescriptionJob DescriptionCommercial Sheet Metal Shop HACI Mechanical Contractors, Inc.Phoenix, AZ, USAEmployment Type Full-TimeLooking for entry level SHEET METAL SHOP ductwork builders with 1-3 years' experience.Ability to build and insulate ductwork. Ability to apply adhesive and liner pins to duct. Ability to load trucks as needed. Ability to...

  • Sheet Metal Technician

    4 weeks ago

    Phoenix, United States Modigent Full time

    Join Our Dynamic Team as a Sheet Metal Tech! Whether you are a skilled Sheet Metal Tech or looking for your first job, we are expanding our team in Phoenix and want YOU to be part of our growth!Why Choose Us? Commitment to Excellence: Our work environment prioritizes safety, quality, and productivity. We believe in doing things right the first time and...

  • Sheet Metal Technician

    3 weeks ago

    Phoenix, United States Modigent Full time

    Join Our Dynamic Team as a Sheet Metal Tech! Whether you are a skilled Sheet Metal Tech or looking for your first job, we are expanding our team in Phoenix and want YOU to be part of our growth! Why Choose Us? Commitment to Excellence: Our work environment prioritizes safety, quality, and productivity. We believe in doing things right the first time and...

  • Sheet Metal Superintendent

    4 weeks ago

    Phoenix, United States Diamond Peak Recruiting Full time

    Job Summary: The Sheet Metal Superintendent is responsible for coordinating and supervising all on-site activities related to sheet metal fabrication and installation for HVAC and mechanical systems on commercial and industrial projects. This role involves overseeing field teams, managing schedules, ensuring compliance with safety standards, and maintaining...

  • Metal Roofing Manufacturing Specialist

    2 weeks ago

    Phoenix, Arizona, United States Western States Metal Roofing Full time

    Job SummaryWe are seeking a skilled Metal Machine Operator to join our team at Western States Metal Roofing. As a key member of our production team, you will be responsible for setting up and operating manufacturing machines to produce high-quality metal roofing and siding products.Key Responsibilities:Setup and operate manufacturing machines to produce...

  • Field Estimation

    2 weeks ago

    phoenix, United States Gulfstream Strategic Placements Full time

    Job Title: Field Estimation & Sales Manager (HVAC)Location: Phoenix, AZOverviewWe seek an experienced Field Estimation & Sales Manager specializing in HVAC systems to join our dynamic team in Phoenix, AZ. This role is ideal for a seasoned professional with hands-on experience in the mechanical trades, including HVAC, plumbing, pipe fitting, or sheet metal,...

  • Field Estimation

    1 month ago

    Phoenix, United States Gulfstream Strategic Placements Full time

    Job Title: Field Estimation & Sales Manager (HVAC)Location: Phoenix, AZOverviewWe seek an experienced Field Estimation & Sales Manager specializing in HVAC systems to join our dynamic team in Phoenix, AZ. This role is ideal for a seasoned professional with hands-on experience in the mechanical trades, including HVAC, plumbing, pipe fitting, or sheet metal,...

  • Sr Field Sales Estimating Executive

    2 weeks ago

    phoenix, United States Gulfstream Strategic Placements Full time

    Job Title: Sr. Field Sales Estimating ExecutiveLocation: Phoenix, AZJob SummaryWe seek a highly skilled Sr. Field Sales Estimating Executive with extensive experience in commercial mechanical trades to join our team in Phoenix, AZ. The ideal candidate has a strong plumbing, pipe fitting, HVAC, or sheet metal background and has transitioned into sales,...

  • Sr Field Sales Estimating Executive

    2 weeks ago

    phoenix, United States Gulfstream Strategic Placements Full time

    Job Title: Sr. Field Sales Estimating ExecutiveLocation: Phoenix, AZJob SummaryWe seek a highly skilled Sr. Field Sales Estimating Executive with extensive experience in commercial mechanical trades to join our team in Phoenix, AZ. The ideal candidate has a strong plumbing, pipe fitting, HVAC, or sheet metal background and has transitioned into sales,...

  • Sr Field Sales Estimating Executive

    1 month ago

    Phoenix, United States Gulfstream Strategic Placements Full time

    Job Title: Sr. Field Sales Estimating ExecutiveLocation: Phoenix, AZJob SummaryWe seek a highly skilled Sr. Field Sales Estimating Executive with extensive experience in commercial mechanical trades to join our team in Phoenix, AZ. The ideal candidate has a strong plumbing, pipe fitting, HVAC, or sheet metal background and has transitioned into sales,...

  • Special Project Sales Executive

    2 weeks ago

    phoenix, United States Gulfstream Strategic Placements Full time

    Job Title: Special Projects Sales ExecutiveLocation: Phoenix, AZJob OverviewWe seek a highly skilled Special Projects Sales Executive to join our dynamic team in Phoenix, AZ. This role is essential for driving sales and managing client relationships within the commercial mechanical construction sector. The ideal candidate will have hands-on experience in...

  • Special Project Sales Executive

    1 month ago

    Phoenix, United States Gulfstream Strategic Placements Full time

    Job Title: Special Projects Sales ExecutiveLocation: Phoenix, AZJob OverviewWe seek a highly skilled Special Projects Sales Executive to join our dynamic team in Phoenix, AZ. This role is essential for driving sales and managing client relationships within the commercial mechanical construction sector. The ideal candidate will have hands-on experience in...

  • Special Project Sales Executive

    1 month ago

    phoenix, United States Gulfstream Strategic Placements Full time

    Job Title: Special Projects Sales ExecutiveLocation: Phoenix, AZJob OverviewWe seek a highly skilled Special Projects Sales Executive to join our dynamic team in Phoenix, AZ. This role is essential for driving sales and managing client relationships within the commercial mechanical construction sector. The ideal candidate will have hands-on experience in...