Sheet Metal Bench Mechanic

1 month ago

phoenix, United States CultureStaff Full time


Duties and Responsibilities: Include the following; other duties may be assigned.

  • Prepare and operate Press Brakes, Single Stroke punch presses, multi-station drill machines, saws, notchers, air powered grinders, drill motors, and hand tools to fabricate straighten and adjust detail parts and complex assemblies per drawing and work instructions for that operation.
  • Observe machine or process operation and measure parts in accordance with instructions using defined inspection media.
  • Stops machine or process and notifies supervisor when the parts do not conform to specifications.
  • Adjust machine and tool settings under minimal supervision to obtain specified results
  • Perform work in all areas of shop as designated by supervision on an as needed basis.
  • Maintain a clean work area following 5S methodologies.


Education and Experience: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.

  • High School diploma or GED; 0-2 years of demonstrated experience for Level 1 SMB Operator, 2-5 years of demonstrated experience for Level 2 SMB Operator, 5 or more years of demonstrated experience for Level 3 SMB Operator.
  • Acceptable interpretation of drawings and work orders as demonstrated at job interview.
  • Minimum vision requirements: Near and far vision of 20/30 in both eyes (corrected)
  • Manual dexterity to handle small delicate parts and hand held standard measuring equipment at the same time.



Sheet Metal Bench Operator

Experience

Expected Specialized Training

Knowledge, Skills, and Abilities

Level 1

Demonstrates the experience of 0-2 years in a position or specialization

·        Height gage

·        Digital Calipers

·        Pi tape

·        Micrometers

·        Polishing/DeBurr

·        Bench Grinder

·        Bead Blaster

·        Disc Sander

·        Belt Sander

·        Entry level position with little or no prior relevant work experience

·        Acquires basic skills to perform routine entry level operator tasks to operate

·        Work is prescribed and completed with little autonomy

·        Works with either close supervision or under clearly defined procedures

Level 2

Demonstrates 2-5 years of experience in position or specialization

All Level 1 specialized training in addition to:

·        Kick Press

·        Arbor Press

·        Omera

·        Stripit

·        Auto Roller

·        Hand Roller

·        Rivet Machine

·        Has developed knowledge and skills through training or considerable work experience

·        Works within established procedures with a moderate degree of supervision

·        Identifies the problem and all relevant issues in straightforward situations, assesses each using standard procedures, and makes sound decisions.

·        Must be capable of running the majority of jobs in the department.

Level 3

Demonstrates 5 or more years of experience in position or specialization

All level 1 and 2 specialized training in addition to:

·        Expander

·        Notcher

·        Lg Press Brake

·        Sm Press Brake

·        Milling Machine

·        Rivet Machine

·        Whiting Roll

·        Has developed specialized skills or is multi-skilled through job-related training and considerable on-the-job experience

·        Completes work with a limited degree of supervision

·        Likely to act as an informal resource for training new department operators.

·        Must be capable of running all jobs in the department.


Physical Demands: The physical demands described here are representative of those that must be met by an employee successfully perform essential functions of this job with or without reasonable accommodation.

  • While performing the duties of this job, the employee is regularly required to talk, hear, sit, use hands to finer, handle or feel. The employee is frequently required to reach with hands and arms, walk, sit, stoop, kneel, crouch, or crawl.
  • The employee is occasionally exposed to fumes or airborne particles, toxic, or caustic chemicals.
  • The noise level in the work environment is usually moderate.
  • Must be able to lift and or move up to 50lbs.

·        Ability to drive and operate a Forklift.




  • Sheet Metal Bench Mechanic

    1 month ago

    Phoenix, United States CultureStaff Full time

    Duties and Responsibilities: Include the following; other duties may be assigned.Prepare and operate Press Brakes, Single Stroke punch presses, multi-station drill machines, saws, notchers, air powered grinders, drill motors, and hand tools to fabricate straighten and adjust detail parts and complex assemblies per drawing and work instructions for that...

  • Sheet Metal Bench Mechanic

    1 month ago

    Phoenix, United States CultureStaff Full time

    Duties and Responsibilities: Include the following; other duties may be assigned.Prepare and operate Press Brakes, Single Stroke punch presses, multi-station drill machines, saws, notchers, air powered grinders, drill motors, and hand tools to fabricate straighten and adjust detail parts and complex assemblies per drawing and work instructions for that...

  • Sheet Metal Fabrication Specialist

    3 weeks ago

    Phoenix, Arizona, United States CultureStaff Full time

    About the JobCultureStaff is seeking a skilled Sheet Metal Bench Mechanic to join our team. As a key member of our fabrication department, you will play a vital role in ensuring the successful completion of our projects.Job DescriptionWe are looking for an experienced Sheet Metal Bench Mechanic with excellent technical skills and attention to detail. The...

  • Skilled Tradesperson

    15 hours ago

    Phoenix, Arizona, United States QLM, Skilled Staffing Solutions Full time

    About the RoleWe are looking for a skilled tradesperson to join our team as a Sheet Metal Mechanic. As an HVAC Sheet Metal mechanic, you will work on various projects, including installing ductwork, repairing existing systems, and making plans and material estimates for each project.Key ResponsibilitiesFastening metal seams, welding, bolting, creating...

  • HVAC Sheet Metal Mechanic

    15 hours ago

    Phoenix, Arizona, United States QLM, Skilled Staffing Solutions Full time

    Job Summary:We are seeking an experienced HVAC Sheet Metal Mechanic to join our team at QLM, Skilled Staffing Solutions in North Phoenix. As a key member of our crew, you will be responsible for installing, repairing, and maintaining sheet metal systems for residential and commercial projects.About the Role:You will work independently and as part of a team...

  • HVAC Sheet Metal Mechanic

    16 hours ago

    Phoenix, Arizona, United States QLM, Skilled Staffing Solutions Full time

    Job OverviewWe are seeking an experienced HVAC Sheet Metal Mechanic to join our team in North Phoenix.ResponsibilitiesInstall ductwork for remodel projects, ensuring seamless connections and efficient airflow.Repair existing systems, diagnosing issues and implementing effective solutions.Create detailed plans and estimates for each project, considering...

  • HVAC Sheet Metal Technician

    15 hours ago

    Phoenix, Arizona, United States QLM, Skilled Staffing Solutions Full time

    Job OverviewWe are seeking an experienced HVAC Sheet Metal Mechanic to join our team in North Phoenix. As an HVAC Sheet Metal mechanic, you will work independently and as part of a team to ensure all work meets the highest standards of safety and quality.ResponsibilitiesInstalling ductwork for remodel projectsRepairing existing systemsMaking plans and...

  • HVAC Sheet Metal Mechanic

    3 weeks ago

    Phoenix, Arizona, United States QLM, Skilled Staffing Solutions Full time

    About the JobWe are seeking an experienced HVAC Sheet Metal Mechanic to join our team in North Phoenix.ResponsibilitiesInstall ductwork for remodel projects, ensuring high-quality results.Repair existing systems to maintain optimal performance.Create plans and material estimates for each project, considering factors like safety and efficiency.Test and...

  • Sheet Metal Technician

    15 hours ago

    Phoenix, Arizona, United States QLM, Skilled Staffing Solutions Full time

    About the Position:We are seeking an experienced HVAC Sheet Metal Mechanic to join our team at QLM, Skilled Staffing Solutions in North Phoenix. This is a great opportunity to work in a dynamic and growing company that values its employees and provides them with the necessary tools and support to succeed.Your Key Responsibilities:Installing and repairing...

  • CultureStaff | Sheet Metal Bench Mechanic | phoenix, az

    4 weeks ago

    phoenix, United States CultureStaff Full time

    Duties and Responsibilities: Include the following; other duties may be assigned.Prepare and operate Press Brakes, Single Stroke punch presses, multi-station drill machines, saws, notchers, air powered grinders, drill motors, and hand tools to fabricate straighten and adjust detail parts and complex assemblies per drawing and work instructions for that...

  • Sheet Metal Foreman SIGN ON BONUS

    6 days ago

    Phoenix, United States HACI Mechanical Contractors, Inc. Full time

    Job DescriptionJob DescriptionHVAC Sheet metal installers plan, lay out, fabricate, assemble, and install sheet metal duct work and related accessories and equipment. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer;...

  • Sheet Metal Foreman SIGN ON BONUS

    3 months ago

    Phoenix, United States HACI Mechanical Contractors, Inc. Full time

    Job DescriptionJob DescriptionHVAC Sheet metal installers plan, lay out, fabricate, assemble, and install sheet metal duct work and related accessories and equipment. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer;...

  • Aircraft Sheet Metal Repair Specialist

    3 weeks ago

    Phoenix, Arizona, United States Nickerson Talent Solutions Full time

    Job OverviewWe are seeking a skilled Aircraft Sheet Metal Repair Specialist to join our team at Nickerson Talent Solutions.Key Responsibilities:Troubleshoot and inspect aircraft structural components to identify areas requiring repair or maintenance.Perform routine inspections and conduct thorough analyses of aircraft structures to ensure compliance with...

  • Sheet Metal Operations Supervisor

    2 days ago

    Phoenix, Arizona, United States Modigent Full time

    Job TitleWe are seeking an experienced Sheet Metal Operations Supervisor to join our team at Modigent. This role will be responsible for supervising sheet metal operations, leading a team of technicians, and working closely with project managers and superintendents to ensure successful project outcomes.SalaryThe estimated salary for this position is $34-38...

  • Commercial Construction Sheet Metal Installer

    3 weeks ago

    Phoenix, United States Sunstate Mechanical Services Full time

    Job DescriptionJob DescriptionCommercial Sheet Metal Installer/Fabricator at Sunstate Mechanical Services Shift: Monday – Fridays 8am-4:30pm (Some Saturdays dependent on job site) Hourly Rate: $22-35 (DOE) Location: Office Location is 2507 W. Erie Dr., Suite 103 Tempe, AZ 85282. This job does require travelling across the greater Pheonix Area (sites...

  • Aerospace Sheet Metal Fabrication Specialist

    3 weeks ago

    Phoenix, Arizona, United States JCO Workforce Solutions Full time

    At JCO Workforce Solutions, we are seeking an experienced Aerospace Sheet Metal Fabrication Specialist to join our dynamic team. With a strong background in aerospace manufacturing, this role offers the opportunity to work on critical projects and contribute to quality craftsmanship.Job Overview:This is a full-time position that requires working 2nd shift,...

  • Sheet Metal and CNC Inspector

    4 hours ago

    Phoenix, Arizona, United States Amtec Direct Hire Full time

    Responsibilities and RequirementsThis is a direct-hire opportunity with a competitive salary range of $60,000 - $80,000 per year. As a Quality Inspector, you will be responsible for conducting 1st piece and final inspections for fabricated sheet metal and precision machined parts.The ideal candidate will have experience in geometric dimensions and...

  • Commercial Sheet Metal Shop Ductwork Builders

    3 months ago

    Phoenix, United States HACI Mechanical Contractors, Inc. Full time

    Job DescriptionJob DescriptionCommercial Sheet Metal Shop HACI Mechanical Contractors, Inc.Phoenix, AZ, USAEmployment Type Full-TimeLooking for entry level SHEET METAL SHOP ductwork builders with 1-3 years' experience.Ability to build and insulate ductwork. Ability to apply adhesive and liner pins to duct. Ability to load trucks as needed. Ability to...

  • Senior Operations Manager

    3 weeks ago

    Phoenix, Arizona, United States Modigent Full time

    Job SummaryWe are seeking an experienced Senior Operations Manager to lead our Sheet Metal team. This role requires a strong understanding of construction operations, project management, and team leadership.About UsModigent is a leading provider of sheet metal services. We pride ourselves on delivering exceptional quality and customer service to our...

  • Sheet Metal Deburr/Grinder

    2 months ago

    Phoenix, United States SVS Group Full time

    Job DescriptionJob DescriptionSVS Group is currently looking to hire an Experienced Sheetal Metal Grinder - Deburr on 1st shift for one of our Aerospace Clients. 1st Shift - Monday - Friday 5:30am - 2pm plus overtime as needed.$24-$28/per hour. You will have typical Sheet Metal Grinding and Deburring job duties to include:Experience with Sheet Metal is a...