General Carpentry Laborer

3 weeks ago

Ramsey, United States Cornerstone Custom Construction Full time $16 - $28
Job Title: LaborerJob Category: General Entry LevelDepartment/Group: CarpentryLocation: Ramsey, MNTravel Required: Travel RequiredLevel/Salary Range: (Based on Experience)Position Type: Part/Full-TimeHR Contact: Ulana PurcellWill Train Applicant(s): Will Train Applicant(s)
Role and Responsibilities:
  • Measuring and accurately cutting building materials (when needed).
  • Assembling structures according to specifications and direction is given by the lead.
  • Building structures with SIPs (Structural Insulated Panels), ICFs (Insulated Concrete Forms), wood framing, and supporting materials.
  • Always keep the job site clean and organized by putting away their tools and materials after use, sweeping up, and performing other cleaning tasks.

Qualifications and Education Requirements:There are no specific training requirements for this position. However, we require you to have a high school diploma or G.E.D. An ability to read and perform basic math is important to help you progress and safely perform your job.
Preferred Skills:
  • Basic math skills.
  • Ability to read and follow plans/blueprints.
  • Measuring and planning. Knowledge of building code applications.
  • Ability to lift/carry heavy pieces of material or structures.
  • Use of saws and other power tools.
  • Use of various hand tools.


About Cornerstone Custom Construction:

Cornerstone is a well-established and reputable full-service Concrete and Carpentry company focused on Residential & Light Commercial construction in the Twin Cities. We continue to experience steady growth as a direct result of our commitment to quality results and customer satisfaction. Individuals that join our team must also share the same commitment, and a commitment to continual improvement. Two (2) of our unique areas of focus, going all the way back to 1998, is ICF & SIP's Construction.

  • Maintenance personnel/handyman

    4 weeks ago

    Ramsey, United States Dunkin' - Franchisee Of Dunkin Donuts Full time

    Southpaw is currently looking for qualified Maintenance personnel to join our team. Must have general knowledge of plumbing, carpentry, and electrical. A valid Drivers License is required. Van will be provided.We are a Dunkin’ Franchisee with 45 Dunkin locations ranging from North NJ to Duchess County NY. You will help support our maintenance team. The...

  • Experienced Lead Carpenter

    3 weeks ago

    Ramsey, United States Cornerstone Custom Construction Full time $28 - $35

    Cornerstone Custom Construction is looking to hire an Experienced Lead Carpenter, to help in our Framing and performance areas of SIP's and ICF construction.Role and Responsibilities:This work is highly skilled, and you must possess exceptional knowledge of carpentry, the supervision of it, and managing an efficient crew.  This is a hands-on position....

  • Director of Field Production

    3 weeks ago

    Ramsey, United States Cornerstone Custom Construction Full time $45 - $55

    Director of Field Production - Management & Training: This position covers 3 main areas:Liaison for communications with Office, Field, & Customers:Ensure that all parties are set up for successExecute and refine the field training and career path movement of each employee:Work beside team members in each process and procedure.Train & Mentor Leadership and...

  • Validation Engineer

    3 weeks ago

    Ramsey, United States ContractTECH Inc Full time

    Our client in Ramsey, NJ is hiring a Validation Engineer that will be responsible for preperation of validation protocols (IQ/OQ) and commissioning documents for their equipment and control systems. This role will be 100% onsite. JOB RESPONSIBILITES INCLUDE BUT NOT LIMITED TO: Work with our control system programmers to develop and execute factory acceptance...

  • Validation Engineer

    2 days ago

    Ramsey, United States Glatt Group Full time

    Job description Essential Job Function: 1. Must have the ability to develop validation protocols (IQ and OQ), validation reports, and factory acceptance test documents. As such, good writing and grammar skills and attention to detail are essential. 2. Experience is required in reading and interpreting electric and pneumatic controls, technical design...

  • Validation Engineer

    1 week ago

    Ramsey, United States PEAK Technical Staffing USA Full time

    P-DPD-001 Our client in Ramsey, NJ is hiring a Validation Engineer that will be responsible for preperation of validation protocols (IQ/OQ) and commissioning documents for their equipment and control systems. This role will be 100% onsite. JOB RESPONSIBILITES INCLUDE BUT NOT LIMITED TO: Work with our control system programmers to develop and execute factory...

  • Validation Engineer

    1 week ago

    Ramsey, United States PEAK Technical Staffing USA Full time

    P-DPD-001 Our client in Ramsey, NJ is hiring a Validation Engineer that will be responsible for preperation of validation protocols (IQ/OQ) and commissioning documents for their equipment and control systems. This role will be 100% onsite. JOB RESPONSIBILITES INCLUDE BUT NOT LIMITED TO: Work with our control system programmers to develop and execute factory...

  • Validation Engineer

    4 weeks ago

    Ramsey, United States Glatt Group Full time

    Job descriptionEssential Job Function:1. Must have the ability to develop validation protocols (IQ and OQ), validation reports, and factory acceptance test documents. As such, good writing and grammar skills and attention to detail are essential.2. Experience is required in reading and interpreting electric and pneumatic controls, technical design documents,...

  • Validation Engineer

    4 weeks ago

    Ramsey, United States Glatt Group Full time

    Job descriptionEssential Job Function:1. Must have the ability to develop validation protocols (IQ and OQ), validation reports, and factory acceptance test documents. As such, good writing and grammar skills and attention to detail are essential.2. Experience is required in reading and interpreting electric and pneumatic controls, technical design documents,...

  • Validation Engineer

    1 week ago

    Ramsey, United States Glatt Group Full time

    Job description Essential Job Function: 1. Must have the ability to develop validation protocols (IQ and OQ), validation reports, and factory acceptance test documents. As such, good writing and grammar skills and attention to detail are essential. 2. Experience is required in reading and interpreting electric and pneumatic controls, technical design...

  • Plumbing Journeyman and Experienced Apprentice

    3 weeks ago

    Ramsey, United States Logan Companies Full time

    Job DescriptionJob DescriptionLogan Companies is a growing company looking for dedicated hard-working individuals to join our team. We are interviewing for Licensed plumbers and apprentices. We take great pride in providing our customers with high quality work and are looking for someone who strives to do the same. If you are a quality-oriented Plumber who...

  • Controls Engineer

    1 week ago

    Ramsey, United States PEAK Technical Staffing USA Full time

    Controls Engineer Essential Job Function: 1. The ability to develop (not modify), test, and commission Allen Bradley PLC (ControlLogix and/or PLC-5) control system applications using RS Logix. Recent experience is a must. Higher level skills that are required include analog data handling, data exchanges, recipe handling, etc. 2. The ability to develop (not...

  • Controls Engineer

    1 week ago

    Ramsey, United States ContractTECH Inc Full time

    Controls Engineer Essential Job Function: 1. The ability to develop (not modify), test, and commission Allen Bradley PLC (ControlLogix and/or PLC-5) control system applications using RS Logix. Recent experience is a must. Higher level skills that are required include analog data handling, data exchanges, recipe handling, etc. 2. The ability to develop (not...

  • Controls Engineer

    4 weeks ago

    Ramsey, United States Glatt Group Full time

    Essential Job Function: 1. The ability to develop (not modify), test, and commission Allen Bradley PLC (ControlLogix and/or PLC-5) control system applications using RSLogix. Recent experience is a must. Higher level skills that are required include analog data handling, data exchanges, recipe handling, etc. 2. The ability to develop (not modify), test, and...

  • Controls Engineer

    4 weeks ago

    Ramsey, United States Glatt Group Full time

    Essential Job Function: 1. The ability to develop (not modify), test, and commission Allen Bradley PLC (ControlLogix and/or PLC-5) control system applications using RSLogix. Recent experience is a must. Higher level skills that are required include analog data handling, data exchanges, recipe handling, etc. 2. The ability to develop (not modify), test, and...

  • Controls Engineer

    1 week ago

    Ramsey, United States PEAK Technical Staffing USA Full time

    Controls Engineer Essential Job Function: 1. The ability to develop (not modify), test, and commission Allen Bradley PLC (ControlLogix and/or PLC-5) control system applications using RS Logix. Recent experience is a must. Higher level skills that are required include analog data handling, data exchanges, recipe handling, etc. 2. The ability to ...

  • Controls Engineer

    4 weeks ago

    Ramsey, United States Glatt Group Full time

    Essential Job Function: 1. The ability to develop (not modify), test, and commission Allen Bradley PLC (ControlLogix and/or PLC-5) control system applications using RSLogix. Recent experience is a must. Higher level skills that are required include analog data handling, data exchanges, recipe handling, etc. 2. The ability to develop (not modify), test, and...