Crane Operator
3 months ago
Company Description:
BAUER Foundation Corp. (BFC) is a Florida corporation and the U.S. subsidiary of the world-wide operating BAUER Group based in Schrobenhausen, Germany. The BAUER Group is a world-renowned foundation contractor, designer, and builder of the world’s finest foundation equipment.
BAUER Foundation Corp. as part of the BAUER construction division, is a leader in the execution of complex excavation pits, ground improvement, deep foundations and vertical seals, utilizing the most up to date equipment and installation techniques. BAUER Foundation Corp. provides all types of foundation solutions and services for industrial, commercial, residential, and governmental construction projects. BAUER Foundation Corp. promotes BAUER services and technology throughout the entire United States.
Reports to: General Superintendent/Superintendent
Position: Full time
Schedule: 6 days per week, 12 hours per day
Supervisory Responsibilities:
- None
Responsibilities of this Position:
- Operates specialized machinery such as telescope booms, lattice booms, and hydraulic cranes.
- Responsible for operation, setup and daily/weekly maintenance of assigned equipment
- Responsible for understanding all functions of the assigned crane equipment and directing the proper setup of equipment in the correct configuration to perform lifting functions safely and within the rated capacity of the assigned crane equipment
- Exhibits leadership when directing supporting mobilization crews including, riggers, signalpersons and truck drivers during the setup, operation, dismantle and hauling of assigned crane equipment
- Customer focused attitude and problem solving skills
- Must make wise and knowledgeable decisions to maintain safe work practices at all times
- Maintain, Lubricate and Clean assigned equipment regularly
- Coordinate all work in the field with Superintendent and team
- Direct and monitor apprentices assigned to the Superintendent or foremans supervision
- Follows correct lock-out and tag procedures
- Complete daily/weekly inspection logs as required by Bauer
- Fuel equipment upon return at the end of each day
- Loading and preparing all special rigging and crane accessories or tools required daily
- Report all accidents or safety concerns to Superintendent or safety department
This position will be required to travel for projects located throughout the Southeast (FL, GA, SC, NC, AL, LA, TX).
- Valid drivers license
- Travel
- NCCCO or equivalent ANSI/ASME accredited crane operator certification
- OSHA 10 Hour Construction Safety Training
- Must be fit for duty, able to navigate the jobsite and must comply with all company safety requirements and site-specific safety rules on the jobsite
- Ability to travel for work
Physical Requirements:
- Must be able to lift up to 40 pounds at times
- Excellent depth perception and reaction time
- Visual acuity to follow hand signals, maintain logs, as well as inspect and maintain machinery
- Must be able to access and navigate all areas of the construction site, in all types of weather
- Must be able to stand and sit for 10-12 hours
Education and Experience:
- High School diploma or equivalent required
- A minimum of 3 years experience operating telescope booms, lattice booms, and/or hydraulic cranes
- Ability to work independently and on a team
Compensation and benefits:
Competitive salary; exact compensation commensurate with experience.
Benefits offered: health insurance, life insurance, 401(k) plan with employer match, parental leave, tuition assistance, paid holidays and vacation.
Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor an employment Visa at this time.
BAUER Foundation Corp. is an equal opportunity employer and welcomes applications from all qualified individuals. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.
-
Heavy Equipment Crane Operator
2 weeks ago
Odessa, Texas, United States Bauer Foundation Corp Careers Full timeJob OverviewCompany Overview:BAUER Foundation Corp. (BFC) is a Florida-based corporation and the U.S. subsidiary of the globally recognized BAUER Group, headquartered in Schrobenhausen, Germany. The BAUER Group is esteemed for its expertise in foundation contracting, design, and manufacturing of premier foundation equipment.As a part of the BAUER...
-
Heavy Equipment Crane Operator
2 weeks ago
Odessa, Texas, United States Bauer Foundation Corp Careers Full timeJob OverviewCompany Overview:BAUER Foundation Corp. (BFC) is a prominent Florida-based corporation and the U.S. subsidiary of the globally recognized BAUER Group, headquartered in Schrobenhausen, Germany. The BAUER Group is esteemed for its expertise in foundation contracting, design, and the construction of top-tier foundation equipment.As a key player in...
-
Heavy Equipment Crane Operator
2 weeks ago
Odessa, Texas, United States Bauer Foundation Corp Careers Full timeJob OverviewCompany Overview:BAUER Foundation Corp. (BFC) is a Florida-based corporation and the U.S. subsidiary of the globally recognized BAUER Group, headquartered in Schrobenhausen, Germany. The BAUER Group is esteemed for its expertise in foundation contracting, design, and the manufacturing of premier foundation equipment.As part of the BAUER...
-
Crane Operator I
1 month ago
Odessa, United States LUFKIN Industries, Inc. Full timeLufkin is seeking a Crane Operator I for their Odessa, TX location who will be responsible for operating a mobile crane to lift, move, position, and reposition loads providing support to the Field Supervisor/ Manager related to all areas of operation and repairing of Oilfield Pumping Unit equipment. The Crane Operator I will provide the safe operation of the...
-
Crane Operator I
2 months ago
Odessa, United States Lufkin US Acquisition Company LLC Full timeJob DescriptionJob DescriptionLufkin is seeking a Crane Operator I for their Odessa, TX location who will be responsible for operating a mobile crane to lift, move, position, and reposition loads providing support to the Field Supervisor/ Manager related to all areas of operation and repairing of Oilfield Pumping Unit equipment. The Crane Operator I will...
-
Crane Operator I
5 days ago
Odessa, United States Lufkin US Acquisition Company LLC Full timeJob DescriptionJob DescriptionLufkin is seeking a Crane Operator I for their Odessa, TX location who will be responsible for operating a mobile crane to lift, move, position, and reposition loads providing support to the Field Supervisor/ Manager related to all areas of operation and repairing of Oilfield Pumping Unit equipment. The Crane Operator I will...
-
Seal Repair Technician
3 weeks ago
Odessa, United States John Crane Full time $18 - $28Job DescriptionJob DescriptionJob DescriptionUnder general supervision, the Seal Repair Technician is responsible for all processes related to disassembly and assembly of rotating equipment. The Seal Repair Technician follows instruction from a Repair job packet and router to perform DCI (Dismantle Clean and Inspect) and gives a written description of the...
-
Seal Repair Technician
2 weeks ago
Odessa, United States John Crane Full time $18 - $28Job DescriptionJob DescriptionJob DescriptionUnder general supervision, the Seal Repair Technician is responsible for all processes related to disassembly and assembly of rotating equipment. The Seal Repair Technician follows instruction from a Repair job packet and router to perform DCI (Dismantle Clean and Inspect) and gives a written description of the...
-
Production Operator
4 weeks ago
Odessa, United States Rogue Industrial Group Full timeJob DescriptionJob DescriptionTitle: Lease OperatorSchedule: 10/4 (10 days on, 4 days off)Hours: 12 hr daysPay: $30- 45Hierarchy Breakdown:Reports to: Directly to Production Foreman Works Directly Alongside: All Production team and Mechanics on location to resolve relevant troubleshooting issues.*** Please Be Aware this is not an “Office” Position, This...
-
Production Operator
3 months ago
Odessa, United States Rogue Industrial Group Full timeJob DescriptionJob DescriptionTitle: Lease OperatorSchedule: 10/4 (10 days on, 4 days off)Hours: 12 hr daysPay: $30- 45Hierarchy Breakdown:Reports to: Directly to Production Foreman Works Directly Alongside: All Production team and Mechanics on location to resolve relevant troubleshooting issues.*** Please Be Aware this is not an “Office” Position, This...
-
Precision CNC Operator
2 weeks ago
Odessa, Texas, United States Metals USA Full timePosition OverviewThe CNC Machining Specialist plays a crucial role in our manufacturing operations, demonstrating a high level of expertise in material handling and machine operation. This position requires a combination of technical skills and attention to detail to ensure quality production outcomes.Key Responsibilities1. Operate various CNC machines to...
-
Production Equipment Operator
1 month ago
Odessa, Texas, United States Triple - S Steel Full timeAt Triple-S Steel we live and work by our core values.Chemistry : We foster and nurture an entrepreneurial spirit throughout the Triple-S family.This non-exempt (hourly) position typically reports directly to the Warehouse Supervisor or Manager and has no supervisory responsibilities.The position requires working in accordance with Triple-S Steel job...
-
Operations Support Specialist
1 week ago
Odessa, Texas, United States Kirby Smith Machinery Full timeAbout UsKirby-Smith Machinery, Inc. stands as a premier distributor of heavy machinery and cranes throughout the central United States. We are committed to leading the charge in the growth of the construction sector, offering numerous exciting career opportunities for skilled and motivated individuals who aspire to be part of our #WeAre1KirbySmith...
-
Service Technician for Field Operations
1 week ago
Odessa, Texas, United States Tundra Technical Solutions Full timePOSITION RESPONSIBILITIES:· Responsible for the installation, testing, and repair of both new and refurbished products, including equipment and tools.· Address customer feedback, inquiries, and issues promptly and effectively.· Provide sales assistance, ensuring that customers are well-informed about all job-related aspects. Complete necessary...
-
Service Technician for Field Operations
1 week ago
Odessa, Texas, United States Tundra Technical Solutions Full timePOSITION RESPONSIBILITIES:· Responsible for the installation, testing, and repair of both new and refurbished products, including equipment and tools.· Address customer inquiries, requests, and complaints promptly and effectively.· Provide sales assistance, ensuring customers are well-informed about all job-related aspects. Complete necessary...
-
CNC Machining Specialist
2 weeks ago
Odessa, Texas, United States Metals USA Full timePosition OverviewThe CNC Machining Specialist plays a crucial role in our manufacturing operations, utilizing advanced skills in material handling and machine operation.Key Responsibilities1. Operate a variety of machines for processing materials, including cutting, grinding, and milling.2. Set up and adjust machines by installing specified tools and...
-
Mechanical Technician
1 month ago
Odessa, United States LEAD Staffing Full timeJob DescriptionJob DescriptionJob descriptionOperates stationary and moving overhead cranes, forklifts, and any equipment needed to perform job within safety guidelines. Reads and interprets assembly blueprints and schematics and plans assembly or building operations.Duties:–Sets and verifies parts clearances. Verify material per bill of...
-
Mechanical Technician
6 days ago
Odessa, United States LEAD Staffing Full timeJob DescriptionJob DescriptionJob descriptionOperates stationary and moving overhead cranes, forklifts, and any equipment needed to perform job within safety guidelines. Reads and interprets assembly blueprints and schematics and plans assembly or building operations.Duties:Sets and verifies parts clearances. Verify material per bill of material.-capable of...
-
Mechanical Technician
1 month ago
Odessa, United States LEAD Staffing Full timeJob DescriptionJob DescriptionJob descriptionOperates stationary and moving overhead cranes, forklifts, and any equipment needed to perform job within safety guidelines. Reads and interprets assembly blueprints and schematics and plans assembly or building operations.Duties:–Sets and verifies parts clearances. Verify material per bill of...
-
Advanced CNC Technician
1 week ago
Odessa, Texas, United States Metals USA Full timePosition OverviewThe CNC Machining Specialist plays a crucial role in our manufacturing operations, utilizing advanced skills to handle various production tasks effectively. This position requires a high level of expertise in material management and machine operation, developed through extensive training and experience.Key Responsibilities1. Operate a...