![North American Stainless](https://media.trabajo.org/img/noimg.jpg)
HM Floor Operator
4 weeks ago
The position of Mill Floor Operator is responsible for the
operation of all Furnace Delivery, Roughing Mill, Finishing Mill,
down coiler and plate line equipment at the floor level in order
to obtain the proper levels of quality and productivity. This
position is also responsible for monitoring the rolling process
and the auxiliary equipment that is located in the mill bay. The
primary responsibilities of this position are outline below.
DUTIES
1. Daily monitoring and operation of the furnace delivery, roughing
mill, finishing mill, down coiler and plate line equipment at the
floor level utilizing all applicable work instructions.
2. Complete roughing mill check list minimum of once per shift,
notifying proper personnel of any abnormalities or problems.
3. Complete finishing mill check list minimum of once per shift,
notifying proper personnel of any abnormalities or problems.
4. Complete down coiler check list minimum of once per shift,
notifying proper personnel of any abnormalities or problems.
5. Complete hydraulic and lubrication check list minimum of twice
per shift, notifying proper personnel of any abnormalities or problems.
6. Perform scale pit pump checks minimum of once per shift.
7. Perform the down coiler pinch roll inspection/grinding every
campaign or as required.
8. Changing roughing mill work rolls and back-up rolls and
inspecting inside roughing mill housing at specified intervals.
9. Changing roughing mill wipers, roll cooling nozzles and
descaling nozzles.
10. Changing finishing mill work rolls and back-up rolls and
inspecting inside finishing mill housing at specified intervals.
11. Changing finishing mill wipers, roll cooling nozzles and
furnace coiler site glasses as necessary.
12. Scrap cutting and handling.
13. Change automatic bander material as required.
14. Perform automatic banding machine checks and maintenance
as required.
15. Perform all required checks on the coil marking machine.
16. Perform strip inspection as required.
17. Dumping crop buckets as required.
18. Clean out scale pits as required.
19. Clean cameras as required.
20. Perform crane inspections daily.
21. Reject slabs as required.
22. Assist operators with cobble clean up.
23. Perform plate and scrap inventory as required.
24. Perform operational spare parts inventory as required.
25. Load/unload operational material as required.
26. Properly identifying coils and plates.
27. Assist Furnace Entry with Slab Receiving and Campaign
Marking when needed.
28. General house-keeping.
29. House-keeping/maintenance work as assigned.
30. Following all prescribed safety rules.
SUPPLEMENTAL JOB FUNCTIONS:
1. All Mill Floor Operators are responsible for clearly and
thoroughly communicating all relevant information with the
personnel working in all areas of hot rolling facility within his
scheduled shift. This line of communication is also important
with the other Mill Floor Operators, hot mill shift leaders,
The Mill Unit Leader, Operations Group Leader, the Mill
Process Engineer/Supervisor responsible for his areas
and the Hot Rolling Manager.
2. All Mill Floor Operators report to their hot mill shift leader,
the mill Unit Leader, the Operations Group Leader, the
Process Engineer/Supervisor responsible for his areas.
3. All Mill Floor Operators are to take instruction from the
Lead Floor Operators. All problems are to be directed to the Mill
Turn Leader on his crew.
4. All mill operators should have the ability to work with all fellow
employees as a team. They should be able to communicate well and get
along with all personality types. They should also be able to handle
conflicts in a proper manner following their chain of command.
5. All mill operators are expected to be dependable in all manners.
They should show up to work on time, work efficiently all the time
they are scheduled, and do the best possible job they are capable of.
There should be no excessive time missed from work or the jobs they
are required to complete during their shift.
6. Other duties as assigned.
7. Participation in continuous improvement programs.
QUALIFICATIONS
MINIMUM EDUCATION, SKILLS AND EXPERIENCE:
Minimum of High School Degree or Equivalent (GED), basic computer skills, strong communication skills.
PHYSICAL ABILITIES REQUIRED:
1.) Mobility: Stand (stationary) - 60%, stand/walk - 75%,
walking - 75%, sitting - 05%.
2.) Strength and Agility: Lifting - occ. 150, carrying - con.
20, push/pull - occ.150, climbing - fre., balancing -
fre., bending - fre., stooping - occ., crouching - occ.,
kneeling - occ., crawling - occ., running - occ., twisting -
occ., turning - occ.
3.) Dexterity: Grasping (firm/strong), finger dexterity/handling, reaching.
HEALTH AND SAFETY
1.Work in compliance with the Occupational Health and Safety Act and regulations.
2.Follow Company safety rules.
3.Report the absence of or defect in any protective equipment or clothing to the Supervisor or Manager immediately.
4.Use or wear the equipment, protective devices or clothing that is required to be used or worn:
Safety shoes
Safety glasses
Hearing protection
Hard Hat
5.Report to the Safety Coordinator, Group Lead or Supervisor any contravention of the Occupational Health and Safety Act and Regulations or Company policy.
6.Must follow all Lock out Tag out (LOTO) guidelines for designated machines.
7.Maintain a clean and safe work area.
WORK ENVIRONMENT:
1.Work in compliance with the Occupational Health and Safety Act and regulations.
2.Clean, well ventilated and safe work areas.
-
EAF Floor Operator
4 weeks ago
Ghent, United States North American Stainless Full timeJob DescriptionJob DescriptionGENERAL JOB DESCRIPTION:The position of Electric Arc Furnace floor Operator is responsible for all operating functions of the Electric Arc Furnace as listed below.Complete understanding of EAF operations with the objective of utilizing the equipment to meet all of the quality and productivity standards as defined in the quality...
-
SKP Floor Operator
3 weeks ago
Ghent, United States North American Stainless Full timeJob DescriptionJob DescriptionThe Skin Pass 2 operator is responsible for all of the operating functions of the Skin Pass 2 Mill listed below. Operation of the mill must be understood in total with the focus of utilizing the equipment to meet all the quality and productivity goals as outlined in our quality system. All functions of the unit are to be carried...
-
Z Mill Floor Operator
4 weeks ago
Ghent, United States North American Stainless Full timeJob DescriptionJob DescriptionThe Z-Mill operator is responsible for all of the operating functions of the Z-Mill listed below. Operation of the mill must be understood in total with the focus of utilizing the equipment to meet all the quality and productivity goals as outlined in our quality system. All functions of the unit are to be carried out as...
-
HM Elec Mtn Shift Tech
4 weeks ago
Ghent, United States North American Stainless Full timeJob DescriptionJob DescriptionGENERAL JOB DESCRIPTION:This position is responsible for providing maintenance services to the entire plant, primarily regarding issues involving the electrical problems. The technicians primary responsibility is line breakdowns involving electrical/automation systems. In addition, the position requires work on scheduled work...
-
Forklift Operator
4 weeks ago
Ghent, United States ResourceMFG Full timesummary ResourceMFG is immediately hiring for Forklift Operator Entry Level Location: Lafayette, IN Shift:6:00am-6:00pm OR 6:00pm-6:00am Pay starts:$17.50-$18.38, potential for raises at 90 and 120 days Training Required on 8-hour days for up to 6 weeks (7am-4pm) Work Environment: Safety first, Quality over Quantity Job Summary: Work with SAP system when...
-
ZM Process Engineer
2 weeks ago
Ghent, United States North American Stainless Full timeGENERAL JOB DESCRIPTION:This position is responsible for providing engineering service and technical support to the Cold Mill operations with respect to enhancing productivity, improving yield and reducing cost. Supports the operations team, by recommending areas of improvement, supporting floor operations, and solving day-to-day issues related to yield and...
-
ZM Process Engineer
3 weeks ago
Ghent, United States North American Stainless Full timeGENERAL JOB DESCRIPTION: This position is responsible for providing engineering service and technical support to the Cold Mill operations with respect to enhancing productivity, improving yield and reducing cost. Supports the operations team, by recommending areas of improvement, supporting floor operations, and solving day-to-day issues related to yield and...
-
ZM Process Engineer
4 weeks ago
Ghent, United States North American Stainless Full timeJob DescriptionJob DescriptionGENERAL JOB DESCRIPTION:This position is responsible for providing engineering service and technical support to the Cold Mill operations with respect to enhancing productivity, improving yield and reducing cost. Supports the operations team, by recommending areas of improvement, supporting floor operations, and solving...