![NeedleTech Products, Inc](https://media.trabajo.org/img/noimg.jpg)
Cutting Grinding Operator
3 months ago
- Prepare cutting machine for operation by cleaning work area, organizing tools, and reviewing documentation.
- Completely follows product handling procedures, all products handled with care and within procedural guidelines.
- Record measurement requirements and tolerances on router.
- Measure parts at beginning, middle and end of run (or as necessary) and records data on router.
- Use inspection microscope to verify workmanship of product.
- Monitor output during shift to ensure that standard run rates are achieved.
- Alert floor technician, work leader or supervisor of any problems with machine and/or quality of product produced.
- Complete all associated documentation required (work travelers, output logs, etc.) per Needletech Standard Operating Procedure.
- Understand attendance policy – shows up at station ready to work promptly and works specified hours.
- Review and understand daily work schedule.
- Understands importance and follows safety policies and procedures
- Communicate pertinent pass down information to the group-leader, supervisor and/or next operator.
- Clean, organize work area upon completion of shift.
- Perform other duties as required.
REQUIREMENTS
EDUCATION:
- High School diploma, GED or equivalent (required).
- Minimum of two to three years of experience operating and setting up machines.
- Previous experience working on cutting machines is preferred
- Ability to stand throughout an eight-hour shift.
- Ability to lift up to 15 pounds.
- Ability to read and understand product labels, policies, diagrams, safety instructions.
- Ability to convey detailed messages department to supervisor and other employees.
Powered by JazzHR
Z3UaXguMwv
-
Grinding Operator
3 months ago
North Attleboro, United States NeedleTech Products, Inc Full timeJob DescriptionJob DescriptionPURPOSE OF JOBGrind the points to match all required dimensions and geometries outlined in the drawing.RESPONSIBILITIESPrepare grinding machine for operation by cleaning work area, organizing tools, and reviewing documentation.Set-up grinder using no more than two strips of product to bring parts into tolerance. If adjustments...
-
Guide Wire Machine Operator
3 months ago
North Attleboro, United States NeedleTech Products, Inc Full timeJob DescriptionJob DescriptionPURPOSE OF JOBPerform conversational programming in order to create specific products for both NeedleTech Products and Galt Medical. The operator will be required to appropriately interface with programs, setup, and operate a Royal Master Generation X machine. The operator will also be required to run various other machines...
-
OD/ID Grinding Machinist
4 weeks ago
North Canton, United States Stolle Machinery Full timeProgram, set-up and operate a CNC OD/ ID Grinder. Will grind metal parts while maintaining quality and safety standards, keep accurate records and maintain equipment and supplies. PRINCIPLE ACCOUNTABILITIES: - Ability to program CNC OD/ ID Grinder th Grinding, Machinist, Operations, Manufacturing, CNC
-
Prototype Technician
1 month ago
North Canton, United States The Timken Company Full timeWhat Timken makes possible begins with you.Those who came before us helped land a man on the moon, create the world's infrastructure, and introduce renewable energy alternatives. Now you can join the Timken team to write your own unique story and help drive what's next.A career at Timken means you can have an immediate impact doing Work That Matters to the...
-
Precision Machining Specialist
2 days ago
Attleboro, Massachusetts, United States NeedleTech Products Full timeJOB SUMMARY:As a Precision Machining Specialist, you will engage in conversational programming to manufacture tailored products for NeedleTech Products. Your role will involve interfacing with software, setting up, and operating advanced machining equipment, including the Royal Master Generation X machine.Additionally, you will be responsible for operating...
-
Prototype Technician
1 month ago
North Canton, United States Lovejoy Curtis LLC Full timeWhat Timken makes possible begins with you. Those who came before us helped land a man on the moon, create the world's infrastructure, and introduce renewable energy alternatives. Now you can join the Timken team to write your own unique story and help drive what's next.A career at Timken means you can have an immediate impact doing Work That Matters to the...
-
Prototype Technician
1 month ago
North Canton, United States The Timken Company Full timeWhat Timken makes possible begins with you. Those who came before us helped land a man on the moon, create the world's infrastructure, and introduce renewable energy alternatives. Now you can join the Timken team to write your own unique story and help drive what's next. A career at Timken means you can have an immediate impact doing Work That Matters to the...
-
Prototype Technician
1 month ago
North Canton, United States Lovejoy Curtis LLC Full timeWhat Timken makes possible begins with you. Those who came before us helped land a man on the moon, create the world's infrastructure, and introduce renewable energy alternatives. Now you can join the Timken team to write your own unique story and help drive what's next. A career at Timken means you can have an immediate impact doing Work That Matters to the...
-
Die Cut/Digital Operator
3 months ago
North Syracuse, United States Beneficial Talent Source Full timeQUALIFICATIONSGood manual dexterity for cutting, grasping, guiding, pressing, pulling, pushing, rolling, typing, turning knobsMust be able to stand for long periods of time on varied surfaces and reach, twist, bend and stretch when requiredAbility to use/handle a strobe light to find errors; must not have light sensitivity issuesExcellent hand-eye...
-
Guide Wire Machine Operator
4 weeks ago
North Attleborough, United States NeedleTech Products Full timePURPOSE OF JOB Perform conversational programming in order to create specific products for both NeedleTech Products and Galt Medical. The operator will be required to appropriately interface with programs, setup, and operate a Royal Master Generation X machine. The operator will also be required to run various other machines to include; Guide Wire Cutting,...
-
Forklift Operator
3 months ago
North Attleboro, United States Clutter Full timeAt Iron Mountain we know that work, when done well, makes a positive impact for our customers, our employees, and our planet. That’s why we need smart, committed people to join us. Whether you’re looking to start your career or make a change, talk to us and see how you can elevate the power of your work at Iron Mountain. We provide expert, sustainable...
-
Polisher
1 month ago
North Attleboro, United States The Alpha Group Full timeJob DescriptionJob DescriptionCurrently Seeking a Polisher for a full-time temporary to permanent position in North Attleboro, MA.Responsibilities of Polisher:-Safely operate hand polisher and other power tools-conduct sanding, pumice, and stoning tasks-Perform grinding, sanding, and polishing of objects- Assist in polishing palm sized metal materials and...
-
Polisher
1 month ago
North Attleboro, United States The Alpha Group Full timeJob DescriptionJob DescriptionCurrently Seeking a Polisher for a full-time temporary to permanent position in North Attleboro, MA.Responsibilities of Polisher:-Safely operate hand polisher and other power tools-conduct sanding, pumice, and stoning tasks-Perform grinding, sanding, and polishing of objects- Assist in polishing palm sized metal materials and...
-
Precision CNC Operator
1 day ago
North Tonawanda, New York, United States Buffalo Pumps Full timeJob OverviewELIGIBLE FOR $1000 EMPLOYMENT BONUSAvailable Shifts: Second and ThirdShift Differential: $1.50/hr for 2nd and 3rd shiftsVoluntary Overtime Opportunities - Union Environment (USW)Position SummaryWe are seeking skilled individuals to operate cutting-edge Mazak machines, specifically the Integrex i450 and i250 series. Additional responsibilities...
-
Manufacturing Assembly Technician
2 days ago
North Prairie, Wisconsin, United States Aerotek Full timeJob Title: Manufacturing Assembly Technician*Job DescriptionEngage in a variety of assembly and construction tasks to fabricate all types of water pumping stations, enclosures, and component sub-assemblies or equipment while adhering to precise tolerances and stringent inspection standards. Execute fabrication processes including cutting, grinding, sanding,...
-
Metal Fabrication Machine Operator
3 months ago
North Attleboro, United States NeedleTech Products, Inc Full timeJob DescriptionJob DescriptionPURPOSE OF JOBRun crimping, bending, buffing, flaring, welding, soldering, laser welding, and laser cutting machines assigned in order to produce quality product at optimal machine efficiency. RESPONSIBILITIESPrepare workstation for operation by cleaning work area, organizing tools, and reviewing documentation.Operate machine,...
-
Slitter Operator
2 months ago
Attleboro, United States Engineered Materials Solutions Full timeJob DescriptionJob DescriptionPosition Summary:Set up and operate a slitting machine to slit and/or trim a wide variety of clad and mono-metals to close tolerance. Handle material and package cuts for delivery to next operation.Responsibilities:Process material through slitterInspect and release slit materialComplete setups, routine maintenance, and other...
-
Machine Operator
1 month ago
Attleboro, Massachusetts, United States Rust-Oleum Corporation Full timeJOB DESCRIPTION As our Machine Operator you are to package paint and related products by operating, setting up, adjusting, and performing QC checks while tending to machines/hand fills to package paint in a safe, consistent, and efficient manner, according to specifications. Solving challenges is the very foundation of who we are. After all, in the...
-
Tool & Die Maker
3 months ago
North Lawrence, United States Crown Cork & Seal USA, Inc. Full timeCOMPANY OVERVIEW: CROWN Cork & Seal USA, Inc., a wholly owned company of Crown Holdings, Inc. is a global leader in the design, manufacture, and sale of packaging products for consumer goods. At Crown, we are passionate about helping our customers build their brands and connect with consumers around the world. We do this by delivering innovative packaging...
-
Belt Machine Operator
1 day ago
Lincolnton, North Carolina, United States Bosch Group Full timePosition Overview:As a key member of the production team, you will play a vital role in the operation of the Belt & Pack machinery, ensuring efficient and high-quality output.Key Responsibilities:Collaborate within a team to facilitate the production process by managing various stations of the Belt & Pack machine.Perform tasks including Cut to Length,...