Sheet Metal Mechanic

1 month ago

Greenville, United States Thomas Mechanical Full time
Job DescriptionJob Description

Thomas Mechanical is an established mechanical construction company located in Laurens. We serve all over South Carolina but primarily the Upstate as well as North Georgia and Western North Carolina. Thomas Mechanical works at some of the most prominent job sites and many reputable general contractors in the state.

Thomas Mechanical does HVAC Design Build layout and installs, HVAC Commercial/Industrial Air Conditioning, Residential Air Conditioning for houses, Process Piping for natural gas and compressed air, Fire Sprinkler Systems, and Service and Maintenance of HVAC equipment.

RESPONSIBILITIES:

The duties and responsibilities of this position include, but are not limited to:

  • Fabricate, assemble, measure, install, and repair sheet metal products and equipment, such as ductwork, plenums, and flashing.
  • Installation of ductwork and HVAC equipment in commercial and industrial settings.
  • Set up and operate fabricating tools to cut, bend, and straighten sheet metal.
  • Review plans and specifications to understand requirements.
  • Familiarity with various duct connections – snaplock, TDC, ductmate, slip & drive, etc.
  • Familiarity with ductwork takeoff and submittals.

REQUIREMENTS:

  • 3 plus years of experience
  • Lift certifications
  • Personal PPE
  • Ability to do onsite modifications and fabrications as needed
  • Valid driver’s license with a clean driving record
  • Ability to understand and carry out instructions furnished in written, oral or diagram form
  • Demonstrated ability to communicate with a variety of personalities
  • Work independently as well as in a team environment

PHYSICAL DEMANDS:

  • Moderate to heavy physical effort required including sitting, standing, walking, kneeling, squatting, climbing steps or ladders, grasping, fine and course manipulation, reaching both forward and above head level,
  • Must be able to push, pull and/or lift up to 50 pounds; and safely operate assigned machinery.
  • Must be able to stand and work for long periods
  • Must be able to work at heights
  • Must be able to work in varying temperatures

BENEFITS:

  • Competitive pay based upon experience
  • Health, Dental and Vision Insurance
  • Holiday and Vacation Pay
  • 401(k) Program

SCHEDULE:

  • 4 – 10 hour shifts (Monday-Thursday 7:00 am – 5:30 pm)
  • Overtime on Fridays and weekends as needed

WORK LOCATION: Multiple locations

JOB TYPE:

  • Full-time
Company DescriptionThomas Mechanical is an established mechanical construction company located in Laurens. We serve all over South Carolina but primarily the Upstate as well as North Georgia and Western North Carolina. Thomas Mechanical works at some of the most prominent job sites and many reputable general contractors in the state.Company DescriptionThomas Mechanical is an established mechanical construction company located in Laurens. We serve all over South Carolina but primarily the Upstate as well as North Georgia and Western North Carolina. Thomas Mechanical works at some of the most prominent job sites and many reputable general contractors in the state.

  • Sheet Metal Mechanic

    2 weeks ago

    Greenville, United States The Staffing Resource Group Inc Full time

    Sheet Metal MechanicHourly: $34 - $38/hr Location: Greenville, SC Shift: 1 st , 2 nd , and weekend shift available Industry: Government/Defense Employment Type: Long-term contract with potential for permanent employment Qualifications: High school diploma. 6-8 years experience working on aviation production drilling/structures. Experience working...

  • Sheet Metal Mechanic

    2 weeks ago

    Greenville, United States Butler America Full time

    Sheet Metal Mechanic (12 openings)Location: Greenville, SC (29607)Job ID: #69640Pay Range: $34 - $38US Citizens and Us Perm Residents onlyExperience: 6 - 8 years Minimum Aviation production drilling / structuresTHE COMPANY: Work with one of the World's Largest American Owned Aerospace & Defense Companies. SUMMARY:Aircraft Model / Type of Work: F-16...

  • Sheet Metal Mechanic

    2 weeks ago

    Greenville, United States Butler America Aerospace L.L.C. Full time

    Sheet Metal Mechanic (12 openings)Location:Greenville, SC (29607)Job ID: #69640Pay Range: $34 - $38US Citizens and Us Perm Residents onlyExperience: 6 - 8 years Minimum Aviation production drilling / structuresTHE COMPANY: Work with one of the World's Largest American Owned Aerospace & Defense Companies.SUMMARY:Aircraft Model / Type of Work: F-16 Production...

  • Aircraft Sheet Metal/Structural Mechanic Specialist

    4 days ago

    Greenville, South Carolina, United States Strategic Support Solutions Full time

    Job SummaryWe are seeking a highly skilled Aircraft Sheet Metal/Structural Mechanic to join our team at Strategic Support Solutions. As a key member of our maintenance team, you will be responsible for performing a variety of tasks related to aircraft sheet metal and structural repair and fabrication.Key ResponsibilitiesPerform mechanical stripping of paint...

  • Aircraft Sheet Metal/Structural Mechanic

    3 months ago

    Greenville, United States Strategic Support Solutions Full time

    Job DescriptionJob DescriptionJob Description:The Aircraft Sheet Metal Mechanic needs to be proficient in mechanical stripping of paint materials on aircraft panels and surfaces; corrosion repair and mitigation of aircraft panels and structural components; modifications to and structural repair of aircraft panels and structural components. Qualified...

  • Sheet Metal Mechanic

    4 days ago

    Greenville, United States The Structures Company Full time

    Job DescriptionJob DescriptionJob Description: Plans, lays out, fabricates, assembles, installs, and repairs both internal and external aircraft structures and surfaces for aircraft modification in accordance with technical manuals, engineering drawings, and FAA regulations. F-16 Production line structures and assembly. Installing fasteners, drilling...

  • Aircraft Sheet Metal Technician

    2 weeks ago

    Greenville, South Carolina, United States HSGI, Inc. Full time

    Job OverviewWe are seeking a skilled Aviation Sheetmetal Mechanic for a long-term opportunity with HSGI, Inc.. This position requires a high level of expertise in metal fabrication and assembly within the aviation sector.Key ResponsibilitiesPerform sheet metal repairs and installations on aircraft structures.Ensure compliance with safety and quality...

  • Aircraft Sheet Metal/Structural Mechanic

    2 months ago

    Greenville, United States Strategic Support Solutions Full time

    Job DescriptionJob DescriptionJob Description:The Aircraft Sheet Metal Mechanic in government maintenance needs to be proficient in mechanical stripping of paint materials on aircraft panels and surfaces; corrosion repair and mitigation of aircraft panels and structural components; modifications to and structural repair of aircraft panels and structural...

  • Aerospace Sheet Metal Specialist

    2 weeks ago

    Greenville, South Carolina, United States Strategic Support Solutions Full time

    Position OverviewStrategic Support Solutions is seeking a skilled Aircraft Sheet Metal Mechanic to enhance our government maintenance operations.Key ResponsibilitiesPerform mechanical stripping of paint materials on aircraft panels and surfaces.Conduct corrosion repairs and modifications to structural components.Utilize a variety of tools including hammers,...

  • Metal Handler

    4 weeks ago

    Greenville, United States Elwood Staffing Full time

    Metal Handler Elwood Staffing is looking for a hardworking metal handler for our Fountain Inn SC client. Company Profile Work for a company with 70 years experience and leading manufacturer of commercial and industrial sheet metal ductwork. What's in it for you? Elwood Staffing associates are eligible for a comprehensive and competitive benefits package...

  • Maintenance Mechanic Factory

    3 months ago

    Greenville, United States El Milagro Inc. Full time

    Job DescriptionJob DescriptionPrimary Role:Assist with fabricating / welding structures in the plant or in the maintenance shop. To assure maximum efficiency and safety of mechanic equipment. Assist with installation and maintenance of mechanical equipment, system diagnosis and repair of breakdowns.Primary Responsibilities: Taking lead on larger projects and...

  • Maintenance Mechanic Factory

    3 months ago

    Greenville, United States El Milagro Inc. Full time

    Job DescriptionJob DescriptionPrimary Role:Assist with fabricating / welding structures in the plant or in the maintenance shop. To assure maximum efficiency and safety of mechanic equipment. Assist with installation and maintenance of mechanical equipment, system diagnosis and repair of breakdowns.Primary Responsibilities: Taking lead on larger projects and...

  • Aircraft Structures Mechanic

    5 days ago

    Greenville, South Carolina, United States Aerotek Full time

    Aircraft Structures Mechanic Job DescriptionJob SummaryWe are seeking an experienced Aircraft Structures Mechanic to join our team at Aerotek. As an Aircraft Structures Mechanic, you will be responsible for performing structural aircraft assembly, repairs, re-work, and modifications on F-16 aircraft.Key ResponsibilitiesPlan, lay out, fabricate, assemble,...

  • Aircraft Maintenance Mechanic

    7 days ago

    Greenville, South Carolina, United States Strategic Support Solutions Full time

    Position OverviewStrategic Support Solutions is seeking a skilled Aircraft Sheet Metal Mechanic to enhance our government maintenance team.Key ResponsibilitiesThe successful candidate will be responsible for:Expertly stripping paint materials from aircraft panels and surfaces.Conducting corrosion repairs and modifications to structural components.Utilizing a...

  • Aircraft Metal Fabrication Specialist

    2 weeks ago

    Greenville, South Carolina, United States HSGI, Inc. Full time

    Position OverviewThis role presents a long-term opportunity within the aviation sector, focusing on sheet metal fabrication and maintenance.RequirementsPlate Test: Candidates must successfully complete a plate test prior to employment.Compensation: Pay will be based on experience (BOE).Tools: Applicants are required to possess their own tools for the job.Per...

  • Mechanical Design Engineer

    3 months ago

    Greenville, United States The Hayes Approach Full time

    Job DescriptionJob DescriptionSalary: $80,000 and up depending on experienceOur Company manufactures tools for electrical contractors, offering more than 100 products, including cable pullers, conduit benders, and knockout sets.  We are based in Upstate Greenville, South Carolina off of 85 and Hwy 29, and the Company is proud of its national connections, as...

  • Aircraft Mechanic

    3 months ago

    Greenville, United States Strategic Support Solutions Full time

    Job DescriptionJob DescriptionStrategic Support Solutions is seeking experienced Aircraft Mechanics to fill aircraft maintenance positions in Greenville, SC. Second shift positions will receive $5 per hour shift differential. Successful candidates will receive a $500 bonus after 6 months of employment.Primary Duties: Inspect parts, systems, and airframe as...

  • Mechanical and Electrical Assembly Technician

    2 weeks ago

    Greenville, South Carolina, United States Barry-Wehmiller Group Full time

    Company Overview:Barry-Wehmiller Group is a leading global provider of engineering consulting and manufacturing technology tailored for the packaging, corrugating, sheeting, and paper-converting sectors. Our mission is to leverage business as a force for good, fostering a culture of people-centric leadership and operational excellence.Position Summary:The...

  • Heavy Equipment Mechanic

    2 weeks ago

    Greenville, South Carolina, United States RoadSafe Traffic Full time

    We are seeking a dedicated and skilled **Heavy Equipment Mechanic** to join our team. This full-time, hourly role requires a proficient mechanic experienced in diesel and mobile equipment repair, capable of diagnosing and addressing a variety of mechanical issues. The position involves significant physical activity, including prolonged standing, bending,...

  • HVAC Project Mechanic Apprentice

    1 week ago

    Greenville, United States Johnson Controls Full time

    Are you looking to increase your HVAC knowledge and learn firsthand from some of the top HVAC teams? Our team will give you this opportunity, in addition we provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement, increased incentive opportunity for executed pull-through work,...