Mechanic

3 weeks ago

Casper, United States FLANDERS Full time
Job DescriptionJob Description

The FLANDERS team is looking for Mechanic to join the Casper, WY team  This over-all Mechanic can disassemble, inspect, clean, repair, test, reassemble basic and routine AC and DC electromechanical motors and equipment. Learn to work in multiple areas but not limited to: Balancing, Machining, Wielding and Winding.

Here's What You'll Learn to Perform Under Supervision.

  • Disassembly: Disassemble complex electromechanical equipment noting parts identification, configuration, condition, problems, and failures.
    • Properly mark parts, take photos, and thoroughly complete documentation on iPad, to ensure accurate job completion that meets company and ISO standards.
  •  Assembly: Assist level II or III Mechanics with the final assembly of motors per instructions for each specific job
    • Assemble basic to complex motors and equipment including ball, roller, and sleeve bearings.
    • Pre-test electrical, mechanical, and ensure proper lubrication is used per customer/job requirements.
  • Testing: Perform basic test of electromechanical equipment and document accordingly. Troubleshoot known or suspected problems.
    • Be aware of any abnormalities in test run (rubbing, noise, end play, brush noise, and commutation, etc.).
  • Clean & Inspect: Clean electromechanical equipment assemblies as needed using various methods and steps including but not limited to parts washers/steamers, caustic tanks, and glass beaders.
  • Repairs: Repair or replace defective mechanical or electromechanical parts including but not limited to bearings, brushes, brush holders, motor leads, gears, seals, couplers, overspeeds, brake assemblies and drums, tachs, fans, and end shields.
  • Documentation: Maintain thorough documentation on iPad throughout entire repair process, including all test sheets from receiving unit description to Quality Control Checklist. Record accurately and on a timely basis.

Other Areas – Learn to perform under supervision.

  • Welding/Fabricating: Assist in welding various pieces of routine/basic equipment and machinery. Learn to create and fabricate basic motor parts and equipment using blueprints.  Perform basic and routine welding including Tig, Mig and ARC (stick) welding, .
  • Balancing: Learn balancing basic/routine rotating equipment including all in house and on-site rotating equipment.
  • Winding: Assist on various AC and DC winding jobs including removing original winding, inspecting for winding failure damage, recording data from the original winding, performing voltage testing on standard/basic windings, and assist in rewinding.
  • Machining: Learn milling operations such as drilling, tapping, boring, broaching, and conventional milling and lathe work using various engine lathes including but not limited to horizontal and vertical mills and horizontal boring mills.
  •  Other
    • Perform and promote ISO standards and requirements.
    • Observe all safety procedures and use proper safety equipment including but not limited to eye, ear, and hand protection including showing leadership by promoting safety. Operate and maintain equipment in a safe manner at all times.
    • Maintain a clean, neat, and safe work environment at all times.
    • Assist other mechanics or other employees in skilled or non-skilled duties as requested.
    • Perform other duties as requested 

      Here's What You'll Need:

      Education: High school diploma or equivalent.

      Experience: Minimum of three years hands-on experience with mechanical or electrical equipment. 

      Other:

    •     Ability to perform basic math functions including addition, subtraction, multiplication, division including         understanding fractions and percentages.
    •     Ability to read, write, and comprehend simple written and verbal instructions.
    •     Ability to use iPad and computer.
    •     Ability to understand, perform, and retain various job related training, operational, and safety procedures.
    •     Ability to exercise initiative, judgment, and decision making related to routine duties within set company standards.
    •     Ability to operate overhead cranes, fork lift trucks, and other equipment following proper procedures
    •     Ability to operate various hand tools.
    •    Ability to receive respirator clearance.
    •    Ability to read tape measures, dial calipers, and micrometers.

  • Mechanical Engineer

    2 weeks ago

    Casper, United States Gateway Recruiting Full time

    This position involves mechanical engineering, as well as project management and business development. Job Responsibilities: Mechanical Engineering: HVAC, plumbing, and fire suppression system design, as well as energy analysis, building system assessments, and construction administration. Project Management: Supervision of design and drafting staff,...

  • Heavy Equipment

    7 hours ago

    Casper, United States Tri-State Truck & Equipment, Inc. Full time

    The Service Technician independently repairs machines in the shop. This role removes, installs, repairs, and performs failure analysis of all engines, electrical systems, hydraulics, transmissions, and electronic and computer applications.ESSENTIAL FUNCTIONS:Conducts necessary machine performance and diagnostic tests, interprets results and makes an...

  • Heavy Equipment

    14 hours ago

    Casper, United States Tri-State Truck & Equipment, Inc. Full time

    The Service Technician independently repairs machines in the shop. This role removes, installs, repairs, and performs failure analysis of all engines, electrical systems, hydraulics, transmissions, and electronic and computer applications.ESSENTIAL FUNCTIONS:Conducts necessary machine performance and diagnostic tests, interprets results and makes an...

  • Senior Project Engineer

    1 week ago

    Casper, United States RDAS Full time

    I følge Casper motiverer arbejdet og kollegaerne hos R&D hinanden til at levere innovative løsninger, hvilket gør, at han aldrig møder ind og tænker, at det bliver en lang dag. Til dagligt arbejder Casper som Senior Project Engineer i R&D Test Systems på hovedkontoret i Hinnerup. De seneste par år har hans rolle hos R&D været Technical Lead på...

  • AC/DC Winder

    7 days ago

    Casper, United States Flanders Full time

    This position is responsible for assisting Winding Department on various AC and DC winding jobs including removing original winding, inspecting for winding failure damage, recording data from the original winding, making new coils, and performing voltage testing on standard/basic windings. * Read winding data card for each job. * Inspect various kinds of...

  • Manual Machinist

    2 weeks ago

    Casper, United States FLANDERS ELECTRIC MOTOR SERVICE LLC Full time

    DescriptionFLANDERS is looking for a Manual Machinist to join the team in Casper, WYThe Manual Machinist role is responsible to perform basic lathe/milling operations by utilizing medium size machines including manual lathes/mills and inspect basic/routine parts for defects and wear. Please note: This position requires vocation skills and is not a machine...

  • Surveillance Technician

    2 weeks ago

    Casper, United States STI LLC Full time

    STI provides inspection services of all Downhole Tubular Goods. We provide the highest level of technology, combined with superiorly trained inspectors, to provide our customers with the reassurance that their tools are ready for service. The job requirements for the Surveillance Technician / Monitor are as follows:Minimum Requirements:Technical background...

  • Condition Monitoring Advisor

    7 days ago

    Casper, United States Wyoming Machinery Company Full time

    ESSENTIAL FUNCTIONS * Aggregates and correlates the five elements of condition monitoring, where all are available. * Utilize Cat Foresight application to monitor equipment performance and condition data to make and track recommendations * Utilize DBS, Cat Inspect, Visionlink, fluid analysis, equipment inspections, repair history to provide recommendations...

  • Wyoming Cardiopulmonary seeks Interventional Cardiologist to join their team in Casper, Wyoming

    1 week ago

    Casper, United States CS Wyoming Cardiopulmonary Services PC Full time

    Wyoming Cardiopulmonary seeks Interventional Cardiologist to join their team in Casper, Wyoming!Opportunity Highlights:Buy-in OptionsFull Spectrum of Interventional Cardiovascular CareMechanical SupportLarge Case VolumeOpportunity Requirements:MD/DOBC/BELicensed in Wyoming or ability to obtainOpportunity Benefits:Full Medical Benefits-Health, Dental, Vision,...

  • Account Manager

    3 days ago

    Casper, United States LONG Building Technologies Full time

    Description Why LONG? Throughout our 50+ year history, we have worked hard to make LONG an enjoyable and rewarding place to work. In addition to competitive salaries, comprehensive benefits, and tangible career growth, our people enjoy career stability and company loyalty envied throughout the industry. With average employee tenure of 10+ years, our culture...

  • Solids Control Operator

    3 weeks ago

    Casper, United States NOV Full time

    JOB DESCRIPTIONJOB RESPONSIBILITIES: Complete Solids Control rig ups, rig downs, troubleshooting, and minor repair Perform Solids Control Analysis of equipment Perform electrical rig ups, rig downs and minor repairs Possess satisfactory knowledge of Solids Control and Vacuum Unit jobs Follow proper sampling procedure Complete daily reports and communicate...

  • Manual Machinist

    3 weeks ago

    Casper, United States FLANDERS Full time

    Job DescriptionJob DescriptionFLANDERS is looking for a Manual Machinist to join the team in Casper, WY. The Manual Machinist role is responsible to perform basic lathe/milling operations by utilizing medium size machines including manual lathes/mills and inspect basic/routine parts for defects and wear.Please note: This position requires vocation skills and...

  • Manual Machinist

    6 hours ago

    Casper, United States FLANDERS ELECTRIC MOTOR SERVICE LLC Full time

    DescriptionFLANDERS is looking for a Manual Machinist to join the team in Casper, WYThe Manual Machinist role is responsible to perform basic lathe/milling operations by utilizing medium size machines including manual lathes/mills and inspect basic/routine parts for defects and wear. Please note: This position requires vocation skills and is not a machine...

  • AC/DC Winder

    3 weeks ago

    Casper, United States FLANDERS Inc. Full time

    This position is responsible for assisting Winding Department on various AC and DC winding jobs including removing original winding, inspecting for winding failure damage, recording data from the original winding, making new coils, and performing voltage testing on standard/basic windings. Read winding data card for each job.Inspect various kinds of...

  • CT Technologist

    1 week ago

    Casper, United States e CancerCare Full time

    Job Purpose: The CT Technologist is critical to the overall performance and efficiency of the imaging center. This prepares patients for diagnostic procedures and positions patients to correctly capture the images requested by the physician. Essential Functions: Performs diagnostic CT procedures to aid in diagnosis determination. Produces diagnostic CT...

  • Warehouse Associate F/T

    2 weeks ago

    Casper, United States Admiral Beverage Full time

    Admiral Beverage believes in investing in its people, business partners, and communities, to continually grow and offer the best products and services in the region. With the strength of a large company combined with a small-town, friendly, family-driven mindset; we are here to grow with you. Admiral offers: competitive wages, a full-scale benefit program...

  • Senior Project Manager

    3 weeks ago

    Casper, United States Sletten Companies Full time

    SLETTEN CONSTRUCTION COMPANY OF WYOMING, LLC Position Announcement Sletten Construction is looking for a Senior Project Manager to support current and future construction projects. The Senior Project Manager is responsible for the day-to-day operations and oversight of multiple projects within the Laramie area. He/She will provide leadership to take charge...

  • Certified Occupational Therapist Assistant

    2 weeks ago

    Casper, United States Life Care Center of Casper Full time

    Position Details:* Employment Status: PRN* Shift: DayPosition Summary:The COTA Certified Occupational Therapist Assistant provides direct rehab care in occupational therapy to patients upon physician referral under the supervision of a licensed Occupational Therapist (OT) in accordance with all applicable laws, regulations, and Life Care standards.Education,...

  • Director of Rehabilitation Services

    2 weeks ago

    Casper, United States Life Care Centers of America Full time

    Life Care Center of Casper, WY * $10,000 sign-on bonus! * In-house rehab programs with empowering work environments * Part of a network of nearly 200 facilities in 26 states * Continuing education and growth opportunities Position Summary The Director of Rehabilitation Services directs the three rehab departments of physical, occupational, and speech...

  • Fire Sprinkler Inspector

    7 days ago

    Casper, United States Rapid Fire Protection Full time

    Casper, WY Fire Sprinkler Inspector / Service Fitter Saving Lives, one Life Safety System at a time. * It takes the Best in each of us to bring out the Best in all of us - THE OPPORTUNITY Since 1993, Rapid Fire Protection has stamped our footprint in commercial, residential, and industrial fire suppression and detection. Through core values of...