Current jobs related to Tool Room Technician - Angola - Autoform Tool & MFG. LLC
-
Angola, Indiana, United States Elwood Staffing Full timeJob Title: Experienced Tool Room TechnicianWe are seeking an experienced Tool Room Technician to join our team at Elwood Staffing in Angola.Job Summary:As a Tool Room Technician, you will be responsible for maintaining and repairing tools and equipment in our facility. This is a great opportunity to work with a reputable company in the fuel delivery system...
-
Maintenance Technician 1st shift
2 months ago
Angola, United States Autoform Tool & MFG. LLC Full timeJob DescriptionJob Description Summary: Conducts machine setup, troubleshooting, repairs and preventive maintenance service. Essential Duties and Responsibilities include, but are not limited to the following: Provides emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment...
-
Maintenance Technician 2nd and 3rd shifts
3 months ago
Angola, United States Autoform Tool & MFG. LLC Full timeJob DescriptionJob Description Summary: Conducts machine setup, troubleshooting, repairs and preventive maintenance service. Essential Duties and Responsibilities include, but are not limited to the following: Provides emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment...
-
Lead Mechanical Technician
1 week ago
Angola, Indiana, United States Transocean Full timeCompany Overview:Transocean is dedicated to being the preferred employer in the drilling sector. We continuously strive to enhance our company's performance through innovative technologies and a deep commitment to our work.Position Summary:The Lead Mechanical Technician plays a crucial role in executing preventative maintenance inspections, promptly...
-
Crane Technician
2 months ago
Angola, United States Lift Solutions Holdings, LLC Full timeJob DescriptionJob DescriptionDescription:Position SummaryLooking to advance your career with a company that values real skills? Lift Solutions has an opportunity for you. Lift Solutions provides end-to-end industrial lifting solutions. We offer OSHA compliance inspections, crane equipment, aftermarket services and parts for overhead cranes and other lifting...
-
Hospital Environmental Services Associate
1 week ago
Angola, Indiana, United States Cameron Memorial Community Hospital Full timeCameron Memorial Community Hospital is actively looking for an Environmental Services Technician to contribute to our facility's operations. In this vital role, you will be tasked with ensuring the hospital environment and its equipment are kept in pristine condition.Key Responsibilities:Execute cleaning tasks across various sections of the hospitalEmploy...
-
Hospital Sanitation Specialist
1 week ago
Angola, Indiana, United States Cameron Memorial Community Hospital Full timeCameron Memorial Community Hospital is in search of a dedicated Environmental Services Technician. This role is vital to ensuring that our healthcare environment remains clean and safe for all.Key Responsibilities:Execute cleaning tasks across various sections of the hospital.Employ appropriate methods and tools for disinfecting surfaces effectively.Support...
-
Maintenance Technician
1 week ago
Angola, United States Tenneco Full timeMaintenance Essential Duties and Responsibilities Ability to diagnose, trouble shoot and correctly repair production line equipment in timely manner. Basic understanding of Robotics, PLC's, Sensor's, VFD's, Ladder logic to diagnose, trouble shoot and repair in timely manner. Basic understanding of low voltage and high voltage (up to 480V) systems. Basic...
-
Maintenance Operations Supervisor
4 days ago
Angola, United States Flex-N-Gate Corporation Full timeCompany OverviewFlex-N-Gate Corporation stands as a prominent manufacturer and supplier of automotive components, recognized for its significant contributions to the industry. Our commitment to excellence creates a rewarding environment for dedicated and skilled professionals.Position OverviewThe Maintenance Operations Supervisor is responsible for...
Tool Room Technician
3 months ago
Summary: Assists in the day-to-day operations of the tool room and prototype build departments. Reports directly to the Engineering Manager and executes duties as assigned. Duties will vary daily depending on needs. On-the-job training will be provided for entry level candidates as needed.
Essential Duties and Responsibilities may include but are not limited to the following:
*Weld, assemble and fabricate equipment with minimal direction
*Assemble and test prototype fuel rails and pipes
*Assist in engineering projects
*Assemble electrical cabinets & wiring from wiring schematics
*Layout, specify and assemble hydraulic, pneumatic, and electrical systems
*Read prints including GD&T
*Surface plate layout
*Work overtime as required to support production equipment needs
*Go for part runs on short notice (must hold a valid driver license and be able to operate company vehicles safely)
*Update and maintain work requests
*Maintain safety protocols when building equipment
*Use micrometers, calipers, and scales
Qualifications:
To perform this job successfully, an individual must have a basic knowledge of technical, mechanical, and electrical systems and be able to perform each essential duty satisfactorily after proper on the job training. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
Minimum of a high school diploma or GED is required. Trade school certificate in machine build / fabrication or proof of equivalent machine building experience are preferred, but not required.
Language Ability:
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals written in English. Applicant must be able to communicate verbally in English to support work duties.
Supplies required:
Applicant must be willing to supply or to purchase own hand tools, related supplies, micrometers, calipers, scales, and basic machinists’ tools as required to complete job functions.
Work Environment:
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job the employee is frequently exposed to moving mechanical parts. The noise level in the environment is moderate and may require ear protection at times. Safety glasses are required in all work areas.
Physical Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Lifting to 50 pounds and standing for prolonged periods of time are typical of the work environment.
Company DescriptionPark-Ohio Assembly Components Group (ACG) is a leader in manufacturing of highly engineered components used in the final product of major OEM’s assemblies, such as: automobiles, agricultural, commercial trucks, forklifts, engines or industrial equipment. Assembly Components specializes in metallic tube manipulation, hose extrusion, molding of rubber and plastic products, hose assemblies, as well as low and high pressure fuel rails and direct injection lines used in Port Fuel Injection and Gasoline Direct Injection Systems. Assembly Components’ products are used in numerous applications in various end markets.Company DescriptionPark-Ohio Assembly Components Group (ACG) is a leader in manufacturing of highly engineered components used in the final product of major OEM’s assemblies, such as: automobiles, agricultural, commercial trucks, forklifts, engines or industrial equipment. Assembly Components specializes in metallic tube manipulation, hose extrusion, molding of rubber and plastic products, hose assemblies, as well as low and high pressure fuel rails and direct injection lines used in Port Fuel Injection and Gasoline Direct Injection Systems. Assembly Components’ products are used in numerous applications in various end markets.
