MECHANICAL ENGINEER with Security Clearance

Summary This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer. Duties * You will assist other engineers and technicians contributing to the timeliness and accuracy of completion of projects, products and services of the organization. * You will provide complete, technically correct analysis of work package requirements to resolve technical issues or develop engineered solutions to problems related to complex systems or equipment. * You will meet project deliverable deadlines as a Design Manager on low- to medium- complexity projects while under the supervision of senior engineers and supervisors. * You will assist in developing and preparing working drawings, diagrams, drawing revisions, lists of materials, test specifications, memos, sketches, simple calculations and associated functions for convention systems. * You will exercise judgement in selecting appropriate guidelines and deciding among alternative approaches and refer situations where existing guidelines are inadequate to the supervisor. * You will identify and analyze problems, using resources and technical knowledge to develop solutions. Requirements Conditions of Employment * Must be a US Citizen. * Must be determined suitable for federal employment. * Must participate in the direct deposit pay program. * New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov * Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326. * Males born after 12-31-59 must be registered for Selective Service. * This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time. * This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes. * You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal. * You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases. Qualifications GS-07: In addition to the basic requirements for this position, your resume must also demonstrate that you have at least one year of specialized experience at or equivalent to the GS-05 grade level or pay band in the Federal service or equivalent experience in the private or public sector as a Professional Engineer, providing engineering support of technical, mechanical or electrical services for components, support equipment or facilities associated with an engineering program. GS-09: In addition to the basic requirements for this position, your resume must also demonstrate that you have at least one year of specialized experience at or equivalent to the GS-07 grade level or pay band in the Federal service or equivalent experience in the private or public sector as a Professional Engineer providing engineering support of technical, mechanical or electrical services for components, support equipment or facilities associated with an engineering program. Additional qualification information can be found from the following Office of Personnel Management website: Mechanical Engineering Series 0830 (opm.gov) Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education You can qualify for this position with the following education, in lieu of specialized experience: FOR THE GS-07:
One full academic year of graduate education, law school
OR
Superior Academic Achievement (SAA) through the following method (only one). No more than 10% of academic credit can be based on pass/fail or similar non-traditional grading systems.
2.95 GPA overall or higher or in last 2 years (= or less than 10% Pass/Fail)
3.45 GPA or higher in major or in last 2 years in major (= or less than 10% Pass/Fail)
Upper 1/3 ranking in graduating class (You must submit proof with your application)
National Scholastic Honor Society. Membership in a freshman honor society cannot be used to meet the requirements of this provision. (You must submit proof with your application) FOR THE GS-09:
Successful completion of a master's or equivalent graduate degree
OR
Successful completion of two full years of progressively higher level graduate education leading to a master's degree
OR
Possession of an LL.B. or J.D. that is related to this position being filled.
https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/students/federal-occupations-by-college-major/
OR
A combination of specialized experience at the GS-07 level and graduate education as described above that equates to one year of experience. Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Basic Requirements: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) Note: An applicant who meets the basic requirements as specified in A or B above, except as noted under B.1., may qualify for positions in any branch of engineering unless selective factors indicate otherwise. Additional information This announcement uses the Post-Secondary Students and Recent Graduates direct hire authority to recruit and appoint qualified candidates to certain positions in the competitive service. This is an advanced entry-level position and is considered 100% training. Vacancies filled from this announcement may be filled at any grade level listed. Certain incentives (such as Recruitment or Student Loan Repayment) may be authorized to eligible selectees. If

---