Process Technician
2 weeks ago
SUMMARY
Works on assignments that are complex in nature where considerable judgment and initiative are required in resolving problems and making recommendations. Responsibilities are across all Workcell diagnostic/troubleshooting from with ICT or FVT perspective.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
· Analyze daily process yield reports that will include, but not limited to the following: operator errors, defective product, test equipment/test defects, RMA product defects, and spear corrective actions.
· Increase production yields by understanding and reducing operator errors and driving manufacturing and test engineering defects back to the appropriate department.
· Assist Test Engineer in developing preventative maintenance program and assure compliance to reduce downtime and increase process yields throughout the process.
· Analyze downtime sheets recording downtime of a station to set guidelines for preventative maintenance scheduling.
· Ensure all process bibles are maintained properly.
· Review all 5x5’s to ensure that they were performed and adhered to.
· Perform walkthroughs, inspections, product evaluation and testing as needed.
· Conduct NPI test evaluations.
· Proactively prevent test escapes.
· Ensure product testing completeness and reliability.
· Update and generate documentation as required.
· Assist Project Test Engineer with test process review.
· Evaluates test probes.
· Set-up equipment to perform any required programming and verification test following established procedures for the specified operations to be performed.
· Ensure quality (work meets or exceeds Jabil Workmanship Standards) and improve efficiency through the use of the SPC system when available.
· Operates automated electronic test equipment on manufactured circuit board assemblies and subassemblies.
· Responsible for maintaining a continuous flow of the manufacturing line and meeting production goals while performing the assigned test duties.
· Correctly label and stamp boards, and fill out tags.
· Advise supervisor of any recurring test failure so that prompt corrective action may be taken.
· Ensure assemblies are properly handled and marked.
· Ensure daily logs and move/production tickets are accurately maintained.
· Follows simple, standardized and routine written directions for assigned test operations.
· Adhere to all safety and health rules and regulations
· Comply and follow all procedures within the company security policy
MINIMUM REQUIREMENTS
· AS degree, Technical School Certification, or equivalent and 5 to 10 years experience, or equivalent combination of work experience and education. · Knowledge and understanding of all test engineering department’s procedures pertaining to the individual’s job.
BE AWARE OF FRAUD: When applying for a job at Jabil you will be contacted via correspondence through our official job portal with a jabil.com e-mail address; direct phone call from a member of the Jabil team; or direct e-mail with a jabil.com e-mail address. Jabil does not request payments for interviews or at any other point during the hiring process. Jabil will not ask for your personal identifying information such as a social security number, birth certificate, financial institution, driver’s license number or passport information over the phone or via e-mail. If you believe you are a victim of identity theft, contact the Federal Bureau of Investigations internet crime hotline (www.ic3.gov), the Federal Trade Commission identity theft hotline (www.identitytheft.gov) and/or your local police department. Any scam job listings should be reported to whatever website it was posted in.
Jabil, including its subsidiaries, is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, genetic information, veteran status, or any other characteristic protected by law.
Accessibility Accommodation If you are a qualified individual with a disability, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access Jabil.com/Careers site as a result of your disability. You can request a reasonable accommodation by sending an e-mail to or calling with the nature of your request and contact information. Please do not direct any other general employment related questions to this e-mail or phone number. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to.
#whereyoubelong
#AWorldofPossibilities
#EarlyCareer
-
Process Technician
4 weeks ago
Avery Creek, United States Jabil Full timeJob SummaryWe are seeking a skilled Process Technician to join our team at Jabil. As a Process Technician, you will play a critical role in ensuring the quality and efficiency of our manufacturing processes.Key ResponsibilitiesAnalyze daily process yield reports to identify areas for improvement and implement corrective actions.Collaborate with Test...
-
Process Technician
1 month ago
Oyster Creek, Texas, United States Olin Full timeJob SummaryOlin is seeking a highly skilled Process Technician to join our team at the Oyster Creek, TX plant. As a Process Technician, you will play a critical role in ensuring the safe and efficient operation of our chemical production plant.Key ResponsibilitiesMonitor and control process conditions, equipment, and control systems to ensure optimal plant...
-
Process Technician
1 day ago
Oyster Creek, Texas, United States Olin Full timeJob Title: Process TechnicianOlin Chlor Alkali Products and Vinyls is seeking a highly skilled Process Technician to join our team at the Oyster Creek, TX plant. As a Process Technician, you will play a critical role in ensuring the safe and efficient operation of our chemical production plant.Job Summary:We are looking for a Process Technician who is...
-
Process Technician
4 weeks ago
Cherry Creek, United States SilverTech Full timeProcess Technician (m/f/d) Plastic and Rubber TechnologySilverTech is a leading manufacturer in the field of industrial lining, with over 300 employees and around 25 locations worldwide. We are seeking a skilled Process Technician (m/f/d) to join our dynamic team in Höhr Grenzhausen.Key Responsibilities:Production of individual plastic components for...
-
Process Technician
5 months ago
Oyster Creek, United States Olin Full timeOlin Chlor Alkali Products and Vinyls has an opening at the Oyster Creek, TX plant for full time Process Technicians. The Oyster Creek Plant is looking for top-caliber, technically capable Process Technicians who are action oriented, can make decisions quickly and possess excellent trouble shooting skills. Job Purpose: Perform work in a team...
-
Process Technician
4 weeks ago
Oyster Creek, Texas, United States Olin Full timeJob Summary:Olin is seeking a skilled Process Technician to join our team at the Oyster Creek, TX plant. As a Process Technician, you will play a critical role in ensuring the safe and efficient operation of our chemical production plant.Key Responsibilities:Monitor and control process conditions, equipment, and control systems to ensure optimal plant...
-
Sterile Processing Technician
3 days ago
Coconut Creek, Florida, United States HealthTrust Workforce Solutions Full timeJoin Our Team as a Sterile Processing TechnicianWe are seeking a skilled and compassionate Sterile Processing Technician to join our team at HCA Florida Northwest Hospital in Margate, FL.About the Role:Assist in the preparation and sterilization of medical equipment and instrumentsEnsure the highest standards of cleanliness and sterility in the operating...
-
Equipment Maintenance Technician
1 week ago
avery creek, United States Jabil Full timeAt Jabil we strive to make ANYTHING POSSIBLE and EVERYTHING BETTER. We are proud to be a trusted partner for the world's top brands, offering comprehensive engineering, manufacturing, and supply chain solutions. With over 50 years of experience across industries and a vast network of over 100 sites worldwide, Jabil combines global reach with local expertise...
-
Equipment Maintenance Specialist
3 weeks ago
Avery Creek, United States Jabil Full timeJob SummaryAs an Equipment Maintenance Technician at Jabil, you will play a crucial role in ensuring the smooth operation of our manufacturing processes. Working under close supervision, you will perform a variety of tasks, including scheduled preventive maintenance, feeder maintenance, repair, and data tracking. You will also train employees in the...
-
Sterile Processing Technician
1 day ago
Walnut Creek, California, United States Surgery Partners Full timeAbout the RoleWe are seeking a detail-oriented and skilled Sterile Processing Technician to join our team at Surgery Partners. As a Sterile Processing Technician, you will play a critical role in ensuring the highest level of patient safety and care by preparing and sterilizing medical equipment for use in surgical procedures.Key ResponsibilitiesCollect and...
-
Electro-Mechanical Equipment Technician
1 month ago
Avery Creek, United States Jabil Full timeJob SummaryAs a key member of our team, you will perform a variety of tasks under close supervision, following detailed work instructions that require limited judgment and decision-making to complete.Essential Duties and ResponsibilitiesPerform scheduled preventive maintenance to ensure optimal equipment performance.Conduct feeder maintenance, repair, and...
-
Restoration Process Technician
2 months ago
Battle Creek, United States SERVPRO of North Calhoun County, Northwest Jackson County Full timeJob OverviewARE YOU READY TO EMBARK ON A NEW CAREER PATH?Become an integral part of our Franchise as a Production Technician. In this role, you will contribute significantly to our mission of restoring properties affected by fire and water damage, ensuring that our clients experience a seamless recovery process.We are in search of individuals who thrive in...
-
Certified Sterile Processing Technician
2 weeks ago
Brushy Creek, Texas, United States Ascension Full timeJob SummaryWe are seeking a highly skilled and detail-oriented Certified Sterile Processing Technician to join our team at Ascension Seton. As a key member of our sterile processing department, you will be responsible for ensuring the quality and safety of surgical instruments and equipment.ResponsibilitiesInspect, assemble, and evaluate surgical instruments...
-
Central Sterile Processing Technician
3 weeks ago
Battle Creek, Michigan, United States AdventHealth Georgia Full timeJob SummaryWe are seeking a highly skilled Central Sterile Reprocessing Technician to join our team at AdventHealth Gordon. As a key member of our Sterile Processing department, you will be responsible for ensuring the highest level of patient care by maintaining the cleanliness and sterility of medical instruments and equipment.Key...
-
Chemical Process Technician
3 weeks ago
Goose Creek, South Carolina, United States DCL Full timeJob Title: Chemical OperatorWe are seeking a highly skilled and experienced Chemical Operator to join our team at DCL Corporation.Job SummaryThe Chemical Operator will be responsible for the safe and efficient operation of complex chemical processing equipment, including reactors, distillation columns, and filtration systems. This role requires a strong...
-
Chemical Process Technician
2 weeks ago
Goose Creek, South Carolina, United States DCL Full timeJob Title: Chemical OperatorWe are seeking a highly skilled and experienced Chemical Operator to join our team at DCL Corporation.Job SummaryThe Chemical Operator will be responsible for the safe and efficient operation of complex chemical processing equipment, including reactors, distillation columns, and filtration systems. The successful candidate will...
-
Chemical Process Technician
2 weeks ago
Goose Creek, South Carolina, United States DCL Full timeChemical Operator Job DescriptionDCL Corporation is a leading manufacturer of high-quality pigments, seeking a skilled Chemical Operator to join our team in Bushy Park industrial complex.The successful candidate will be responsible for the safe and efficient operation of complex chemical processing equipment, including reactors, distillation columns, and...
-
Sterile Processing Specialist
1 day ago
Johns Creek, Georgia, United States Emory HealthcareEmory University Full timeJob SummaryWe are seeking a highly skilled Sterile Processing Technician to join our team at Emory Johns Creek Hospital. As a key member of our Central Sterile Processing department, you will be responsible for ensuring the highest standards of quality and safety in the reprocessing of surgical instruments and trays.Key ResponsibilitiesProvides on-site...
-
Certified Sterile Processing Specialist
2 weeks ago
Brushy Creek, Texas, United States Ascension Full timeJob SummaryWe are seeking a highly skilled Certified Sterile Processing Technician to join our team at Ascension Seton in Austin, Texas. As a key member of our Sterile Processing department, you will be responsible for ensuring the highest quality of surgical instruments and equipment.ResponsibilitiesInspect and assemble surgical instruments and instrument...
-
Certified Sterile Processing Technician
2 months ago
Brushy Creek, United States Ascension Full timeDetails Department: Sterile Processing Schedule: Full time day/evening shift. Rotating hours with rotation for overnight call, weekend call, and holiday call. Flex as needed.Hospital: DCMC NorthLocation: Austin, TX Benefits Paid time off (PTO) Various health insurance options & wellness plans Retirement benefits including employer match plans Long-term &...