Current jobs related to Mechanical Inspector I - Oklahoma City - City of Oklahoma City

  • Electrical Inspector I

    1 month ago

    Oklahoma City, United States City of Oklahoma City Full time

    $25.55 - $39.61 HourlyNote: The normal starting pay for this position is the minimum of the pay range listed above. A higher rate of pay may be considered, dependent on the qualifications and experience of the selected applicant and/or the City’s step placement policy.Full-time City employees will receive preference in the following order: major division...

  • Quality Inspector I

    4 weeks ago

    Oklahoma City, United States FASTENER DISTRIBUTION HOLDINGS LLC Full time

    FDH Aero is a trusted global supply chain partner for aerospace and defense companies. With more than 55 years of experience, it specializes in c-class components that include hardware, electrical, chemical, and consumable products and services for global OEM and aftermarket customers. At FDH Aero, we understand that the strength of our brand comes from our...

  • Quality Inspector I

    1 month ago

    Oklahoma City, United States FASTENER DISTRIBUTION HOLDINGS LLC. Full time

    Job DescriptionJob DescriptionFDH Aero is a trusted global supply chain partner for aerospace and defense companies. With more than 55 years of experience, it specializes in c-class components that include hardware, electrical, chemical, and consumable products and services for global OEM and aftermarket customers. At FDH Aero, we understand that the...

  • Mechanical and Plumbing Project Coordinator

    2 weeks ago

    Kansas City, Missouri, United States Benchmark Mechanical LLC Full time

    Mechanical and Plumbing Project CoordinatorWe are seeking a qualified Mechanical and Plumbing Project Coordinator to oversee the management of diverse projects within our organization. This position entails the responsibility of directing the planning, scheduling, and implementation of various mechanical and plumbing initiatives.Core Responsibilities:Oversee...

  • Mechanical Construction Inspector

    3 weeks ago

    New York City, United States Maania Consultancy Services Full time

    Required Skills:Minimum 10 years of experience is required.Minimum of one of the relevant credentials listed as follows:a)Licensed Professional Engineerb)Master Mechanical (HVACR) License Mechanical Construction Inspector Recommended Skills Construction Licensed Professional Engineer Apply to this job.Think you're the perfect candidate? Apply on company...

  • Municipal Building Inspector I or II

    3 weeks ago

    Cedar City, Utah, United States Cedar City Full time

    Job OverviewCedar City is looking for a dedicated professional to join our team as a Building Inspector I or II.Position Summary: This role operates under general oversight to ensure adherence to relevant codes, regulations, and ordinances. The inspector will be responsible for evaluating construction projects to guarantee compliance with established...

  • Quality Inspector

    4 months ago

    Union City, United States RJO Consulting Full time

    Job DescriptionJob DescriptionGreetings,Our client in Union City/Fremont area, CA is hiring a QA Mechanical Inspector II & III. This is a full time employee position with great opportunity to work on challenging assignments and grow your career. There are 1st and 2nd shift positions available.REPORT TO: Quality Inspection SupervisorSUMMARY:The QA Mechanical...

  • Construction Standards Inspector I or II

    3 weeks ago

    Cedar City, Utah, United States Cedar City Full time

    Job OverviewCedar City is looking for a skilled individual to take on the role of Building Inspector I or II.Position Summary: This role operates under general oversight to ensure adherence to relevant codes, regulations, and ordinances. For comprehensive details, please refer to the full job description.COMPENSATION AND BENEFITS: The salary range for...

  • Quality Inspector I-A2/B2

    2 weeks ago

    Salt Lake City, United States Manpower Full time

    Our client, a leading manufacturer in the medical device industry, is seeking a Quality Inspector I-A2/B2 to join their team. As a Quality Inspector I-A2/B2, you will be part of the Quality Assurance department supporting product compliance and evaluation. The ideal candidate will have attention to detail, strong communication skills, and the ability to...

  • Quality Inspector I-A2/B2

    2 weeks ago

    Salt Lake City, United States Manpower Group Inc. Full time

    Our client, a leading manufacturer in the medical device industry, is seeking a Quality Inspector I-A2/B2 to join their team. As a Quality Inspector I-A2/B2, you will be part of the Quality Assurance department supporting product compliance and evaluation. The ideal candidate will have attention to detail, strong communication skills, and the ability to...

  • Quality Inspector I

    2 weeks ago

    Salt Lake City, United States Intellectt Inc Full time

    Job Title: Quality Inspector ILocation: 4455 Atherton Drive, Salt Lake City, UT, USA, 84123Duration: 12 monthsShift & Schedule: Salt Lake City, UT|B1 (12 hr) rotating shift|6:30AM-6:30PMShift Times:06:30 AM-06:30 PM Job Description:Able to perform entry level inspection, repetitive tasks associated with visual inspections and basic functional testing...

  • HVAC/ Refrigeration Mechanic I

    3 weeks ago

    Oklahoma City, United States Oklahoma State University-Oklahoma City Full time

    Job DescriptionPosition Details Req ID: req18225 Position Title: HVAC/ Refrigeration Mechanic I Position Type: Staff Full-Time Position Number: 632594 OSU Campus: Stillwater Department: CT-MEP Location Address: Stillwater, Oklahoma, 74075United States Hiring Supervisor: Craig Caselman Hiring Range (Contingent upon available funding): 21.00 - 26.00, Hourly...

  • Missouri Automotive Inspector and Mechanic

    2 weeks ago

    Kansas City, Missouri, United States SILVER EAGLE AUTO MALL INC Full time

    Job OverviewSilver Eagle Auto Mall Inc is seeking a qualified Missouri Automotive Inspector and Mechanic. An MVI license is essential, or candidates must be willing to take the examination and demonstrate the ability to pass it.We require an individual capable of performing general mechanical tasks within a large used car dealership environment. The...

  • HVAC/ Refrigeration Mechanic I

    2 months ago

    Oklahoma City, United States InsideHigherEd Full time

    Position Details Req ID: req18225 Position Title: HVAC/ Refrigeration Mechanic I Position Type: Staff Full-Time Position Number: 632594 OSU Campus: Stillwater Department: CT-MEP Location Address: Stillwater, Oklahoma, 74075United States Hiring Supervisor: Craig Caselman Hiring Range (Contingent upon...

  • Aviation Safety Inspector

    4 weeks ago

    Oklahoma City, United States Federal Aviation Administration Full time

    Summary Serves as an Airworthiness Instructor at the FAA Academy. Conducts training programs for field personnel concerning regulations, policies, procedures, specialized training on airworthiness, surveillance, and certification of aircraft, airmen and air agencies. Responsibilities Develops and conducts courses of indoctrination for newly hired Flight...

  • Construction Inspector I

    1 week ago

    Arizona City, Arizona, United States City of Mesa, AZ Full time

    About the JobThe City of Mesa, AZ is seeking a skilled Construction Inspector I to join our team. As a Construction Inspector I, you will be responsible for inspecting and coordinating construction activities for various projects, ensuring compliance with contract documents, applicable codes, and industry standards.Key ResponsibilitiesInspect construction...

  • Mechanical Quality Assurance Inspector

    3 weeks ago

    Kansas City, Missouri, United States SQA Services Full time

    Job OverviewAt SQA Services, we are seeking a skilled Mechanical Quality Assurance Inspector to join our esteemed team. This role is essential for ensuring the highest standards of quality in the aerospace sector. Role Responsibilities:The successful candidate will be an integral part of a worldwide inspection unit dedicated to maintaining the quality of...

  • Construction Inspector II

    4 weeks ago

    Oklahoma City, United States City of Oklahoma City Full time

    $26.75 - $41.46 HourlyNote: The normal starting pay for this position is the minimum of the pay range listed above. A higher rate of pay may be considered, dependent on the qualifications and experience of the selected applicant and/or the City’s step placement policy.Full-time City employees will receive preference in the following order: major division...

  • Construction Inspector II

    4 days ago

    Oklahoma City, Oklahoma, United States City of Oklahoma City Full time

    {"title": "Job Summary", "content": "This position is located in the Field Services Division of the Public Works Department within the City of Oklahoma City and is under the general direction of a Chief Construction Inspector.Employees of this classification assist the Chief Construction Inspector with supervision and training of Construction Inspectors I in...

  • Electrical Compliance Inspector

    2 weeks ago

    Oklahoma City, Oklahoma, United States City of Oklahoma City Full time

    Hourly Compensation: $39.61Note: The initial salary for this role is set at the minimum of the stated pay range. A higher compensation may be offered based on the qualifications and experience of the chosen candidate, in accordance with the City's step placement policy.Preference in Hiring: Full-time City employees will be prioritized in the following order:...

Mechanical Inspector I

4 months ago

Oklahoma City, United States City of Oklahoma City Full time

$24.66 - $38.23 Hourly

Note: The normal starting pay for this position is the minimum of the pay range listed above. A higher rate of pay may be considered, dependent on the qualifications and experience of the selected applicant and/or the City’s step placement policy.

Full-time City employees will receive preference in the following order: major division first, then department, then all other full-time City employees. Part-time/year-round City employees will receive preference next. If there are no qualified full-time City employees or part-time/year-round City employees, external applicants will then be considered.

Important Application Information: Completion of the supplemental questions is required. Applicant responses to supplemental questions must specifically answer the questions asked. Responses to supplemental questions must be supported by work history/information listed on the application/resume. Applications may not be reviewed if specific responses to supplemental questions have not been provided.

This job classification has been designated as a safety sensitive job classification in accordance with the Oklahoma Medical Marijuana and Patient Protection Act, 63 O.S., § 427.1 et seq., (OSCN 2019), effective August 29, 2019. This means employees in this job classification can be subject to disciplinary action up to and including termination if they test positive for marijuana components or metabolites, even if they possess a medical marijuana license.

JOB SUMMARY

This posting will be used to fill a current vacancy in the Inspections Services Section of the Development Services Department within the City of Oklahoma City and is under the direction of the Chief Mechanical Inspector. However, an eligibility list will be established or supplemented for filling future vacancies in the department, per provisions of the AFSCME collective bargaining agreement. . Journeyman level skill and knowledge relevant to the mechanical field must be acquired prior to assuming the duties of this position. Essential job functions include: traveling to various construction sites to conduct ground, overhead and final inspections on all mechanical systems to ensure compliance with safety and quality regulations as are specified and required by the Oklahoma City Mechanical Codes. The incumbent is responsible for ensuring that mechanical systems are properly installed in order to provide for the safety, health and welfare of the general public. Mechanical systems may include, but are not limited to heating systems; ventilating systems; cooling systems; steam and water heating systems; water heaters; process piping, gas piping, boilers and pressure vessels; venting systems; mechanical refrigeration system; fireplaces and barbecues; incinerators and crematories; and air pollution control systems. The employee performs external structural inspections of boilers as well as inspection for proper initial installation. All mechanical inspections are performed independently with unusual problems or situations referred to the Mechanical Inspector II and/or the Chief Mechanical Inspector. The employee must exhibit tact and diplomacy in communicating with citizens, contractors, building owners or managers, and departmental personnel concerning relevant aspects of work performed. Work products are periodically reviewed at the discretion of the Mechanical Inspector II and/or Chief Mechanical Inspector.

VETERANS PREFERENCE

Honorably discharged veterans of the United States Active Duty Armed Forces, National Guard, and Reserve Forces who are not currently employed full-time by the City of Oklahoma City and who meet the qualifications for the position shall be given preference. To receive preference, veterans must submit verification of honorable discharge from the United States military service (Department of Defense Form DD214 or NGB Form 22) prior to the closing date of the vacancy announcement. 

JOB REQUIREMENTS 

Knowledge of Mechanical Codes and Standards. Knowledge of materials used in the installation of mechanical systems covered by the Mechanical Codes. Knowledge of operation and maintenance requirement for various types of boilers. Knowledge of and skill in following safety procedures. Skill in assessing the overall condition of different types of boilers. Skill in recording information accurately. Skill in communicating verbally and in writing using tact and diplomacy. Skill in reading and interpreting blueprints, plans, and drawings. Ability to interpret and apply knowledge of Mechanical Codes to work performed. Ability to conduct ground, overhead, and final inspections. Ability and willingness to enforce Oklahoma City Mechanical Codes. Ability to work independently in the performance of assigned tasks. Ability and willingness to make objective decisions. Five years’ experience as a licensed mechanical journeyman in a municipality of 20,000 or larger population. Possession of a valid State Mechanical Journeyman License.* Possession of a valid driver license (Operator). 

*NOTE: City Ordinance (Chapter 29 Mechanical Code, Section 29-22) requires that the employee possess the following and that it has been in force for five (5) years. Valid State Mechanical Journeyman Licenses in air conditioning, process piping, refrigeration, heating, gas fitting, and sheet metal.

NOTE: State Law and/or City Ordinance require that the employee possess or obtain a permanent State Mechanical Inspector License within one (1) year of hire/promotion/transfer/demotion. If an individual who is selected does not possess a permanent State Mechanical Inspector License, that individual will be classified as a Provisional Trades Inspector and be compensated at the Provisional Trades Inspector salary range until such time as the license is obtained. Continued employment is contingent upon obtaining a State Mechanical Inspector License within one (1) year from the date of hire/promotion/transfer/demotion.

COMPETENCIES

Execution and Results: (1) Sets well-defined and realistic goals and high standards of performance for self or self and others; (2) displays a high level of initiative, effort, and commitment toward performing work; (3) completes assignments in a thorough, accurate, and timely manner, and delivers results; (4) works with minimal supervision, is motivated to achieve, and demonstrates responsible behavior; (5) demonstrates understanding of all aspects of the job (as specified on the approved job description) and application of accrued knowledge in carrying out duties and responsibilities; technical knowledge; skill in the techniques, equipment, procedures, and work required. Conduct: (1) Conducts oneself with the utmost integrity and professionalism; (2) demonstrates humility; (3) encourages people to share their perspectives, ideas, and opinions; (4) makes decisions based on a sense of shared purpose; (5) takes responsibility for actions and decisions; (6) resilient; (7) leans in to challenges and problems with creative solutions; (8) speaks up and challenges the status quo; (9) relies on the character, ability, strength, truth, and transparency of others and the organization. Teamwork/Team Oriented: (1) Recognizes, values, and leverages the ideas, opinions, and perspectives of others; (2) participates willingly and effectively as a team lead or team member; (3) builds consensus; fosters team commitment, spirit, pride, and trust; (4) collaborates with others to accomplish goals and objectives and achieve results; (5) expresses facts, ideas, messages, and information (technical and non-technical) to individuals or groups clearly, concisely, accurately, understandably, with honesty, tact, and diplomacy and in a manner that is appropriate for the intended audience; (6) actively listens, clarifies information as needed. Customer Centric: (1) Demonstrates commitment to public service; (2) serves and satisfies internal and external customers in a timely and effective manner; (3) establishes, commits to, and maintains high standards for producing quality work products and being responsive to customers; (4) supports the Department/City's mission; develops and executes strategies with the customer in mind. Safety: (1) Complies with all safety policies and practices; (2) promotes a safe work environment; (3) participates in safety meetings; current on completion of safety trainings. Workplace Standards: (1) Takes meal periods and breaks according to policy; (2) ensures sick leave usage does not negatively impact productivity of work unit; (3) notifies supervisor of unscheduled absences; (4) accepts suggestions and supervision with a positive approach; (5) completes work timely and correctly.

WORKING CONDITIONS 

Outside, frequently exposed to heat, cold, humidity, rain, etc. Occasionally works on or around slippery surfaces such as wet floors in boiler rooms, etc. Intermittent to occasional work in areas where temperature is above 90 degrees. Exposed to temperature changes of 20 to 30 degrees or more when entering or leaving boiler rooms. Exposed to high humidity in boiler rooms. Occasionally required to work on ladders, platforms, or mechanical systems twelve (12) feet or more above ground level. Frequently required to work in confined or cramped body positions when conducting inspections on mechanical systems. Will work near objects such as vehicles, construction equipment, and mechanical systems. Frequently exposed to steady and loud noises caused by construction equipment and mechanical systems. Will work around steam boilers where internal boiler temperature can be as high as 325 degrees. Occasionally exposed to large amounts of dust at construction sites. Occasionally exposed to poisonous spiders, bee/wasp stings; poison oak and ivy and pollen which may cause allergic reactions; may also be exposed to toxic gases. May work near equipment that under certain conditions may explode, i.e., operating high pressure boilers under 60 to 100 pounds of pressure. Will work near mechanical and electrical systems that can produce electrical shocks. Occasionally required to work irregular hours including weekends and holidays and be on 24-hour call. Local travel on a daily basis. 

Note: Typical City employee working hours are 8:00 a.m. to 5:00 p.m., Monday through Friday. However, working hours vary (may require work to begin before 8:00 a.m. and/or end beyond 5:00 p.m., and/or may require work on weekends and holidays), and are subject to change, based on the duties and location of the position and the business needs of the assigned work unit/department.

PHYSICAL REQUIREMENTS 

Strength enough to climb into and out of mechanical systems and carry a ladder weighing up to 40 pounds. Flexibility and balance enough to conduct inspections of mechanical systems while standing on a ladder. Extent flexibility and mobility enough to bend, twist, and crawl around mechanical systems to complete inspection duties. Mobility enough to continuously move oneself from place to place. Near vision enough to read items such as blueprints, code books, manufacturers manuals, labels, etc. Far vision enough to drive a vehicle on the street and highway. Hearing enough to understand conversation in a noisy environment and to be able to communicate in person, by telephone, and by two-way radio. Speech enough to communicate in person, by telephone, and in a noisy environment.

OTHER DETAILS

Attachments: Applicants may upload only two attachments. Applicants may choose to combine documents into one file for upload.

Note: An eligibility list will be established from this posting consisting of applicants who receive a score of 70 percent or better. Multiple selection procedures may be utilized; a minimum of 70 percent or better will be required on each; and the results of multiple selection procedures will be equally weighted. The eligibility list will be in effect for 180 days from the date of the final selection procedure and will be used to fill future vacancies.

Pay Method: City employees are required to receive pay electronically, either via direct deposit or pay card.

Background Investigation, Drug Testing, Physical Examination: Upon a conditional offer of employment/acceptance of position, the City of Oklahoma City will conduct a criminal history background check for external applicants. Applicants will be provided contact information for any third-party reporting agencies used to collect background information in connection with conditional offers of employment.

If the position accepted includes a driver license (commercial or non-commercial) Job Requirement, the City of Oklahoma City will obtain a Motor Vehicle Report for internal and external applicants. 

If the position accepted is safety sensitive and/or a driving position, internal and external applicants will be provided a copy of the City of Oklahoma City's Drug and Alcohol Testing Policy prior to being directed for a drug test.

If the position accepted is cyber security sensitive, internal and external applicants will be subject to a Criminal Justice Information Services (CJIS) Interstate Identification Index (III) Fingerprint Background check. Additionally, employees in this job classification must complete Level 4 Security Awareness Training and pass an online certification test.

If the position accepted includes a lift/push/pull/carry Physical Requirement of 25 pounds and greater, internal and external applicants will be directed for a physical examination.