mechanical engineer

1 month ago

Charleston, West Virginia, United States USAJobs Full time
Duties
  • You will establish the guidelines and rules for the water commodity's Single Platform MAXIMO set up within NAVFAC corporate Single Platform MAXIMO guidelines.
  • You will conduct water commodity utility assessments.
  • You will produce weekly "Scorecards" showing performance standards and identify trends for the commodity.
  • You will analyze performance standards and identifying trends for the commodity.
  • You will project future workload volume for the commodity based on historical data, current work execution strategies, and anticipated funding levels.
  • You will develop new ways to provide water service, establish a maintenance program, develop Standard Operating Procedures, and establish various other criteria and policies covering water distribution.

    Requirements

    Conditions of Employment
    • Must be a US Citizen.
    • Must be determined suitable for federal employment.
    • Must participate in the direct deposit pay program.
    • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-
    • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
    • Males born after must be registered for Selective Service.
    • You will be required to obtain and maintain a current waterworks license equal to the highest rated system NAVFAC MIDLANT Utilities standards.
    • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
    • This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). You must be certified as a Career Field Facilities Engineering Level III. Certification is required within 24 months of appointment.
    • You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
    • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
    • The position is within a regional command and the incumbent serving in this position may at any time, be assigned to any site or workstation within NAVFAC MIDLANT AOR. Travel will be required to other sites within the NAVFAC MIDLANT AOR.

      Qualifications

      This position has a Selective Placement Factor which is: Registration as a Professional Engineer (PE). It is required that you provide a copy of your current registration with your application.

      Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Identifying and recommending opportunities for improvements in the process for work induction, production control, and actual execution of services related to water distribution; 2) Utilizing technical expertise to develop proposals on the efficient utilization of systems, machinery, equipment, and personnel; 3) Preparing and presenting briefings to various levels of personnel to effectively communicate proposals, data analysis, and recommendations; 4) Preparing cost projections based on tend analysis; and 5) Establishing and maintaining the water commodity's reliability, and customer safety at the highest possible state. (NOTE: This information must be supported in your resume to be considered for the position).

      Additional qualification information can be found from the following Office of Personnel Management website:
      AND

      Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

      PHYSICAL DEMANDS:
      Office work involves standing, walking, bending, and moving items, mostly under 25 pounds.
      Fieldwork requires considerable walking, bending, climbing, and work around hazardous materials/wastes, in industrial areas and confined spaces. Work in the field may require the use of personal protective equipment (PPE), including a hard hat, steel-toed shoes, protective goggles, respirators, and other protective clothing.

      WORKING ENVIRONMENT:
      At least 75% of the work will be performed in an office setting. Fieldwork will be required approximately 25% of the time. Fieldwork requires typical precaution taken when working in and around industrial areas and construction sites. The work may require working around moving equipment, high levels of noise, and hot and cold temperatures.

      Education

      Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

      Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.

      OR

      Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at:

      OR

      Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit:

      OR

      Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)

      OR

      Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

      Additional information

      This announcement uses the Certain Personnel of the DoD/Modified direct hire authority to recruit and appoint qualified candidates to certain positions in the competitive service.

      A 40-hour work week is typical of this position.

      Recruitment incentives may be authorized to eligible new hires.

      A relocation incentive is generally a single payment intended to offset some of the relocation cost experienced by the selectee.

      A relocation incentive may be authorized. This position is eligible for part time, full time, or ad-hoc telework at the discretion of management.

      This position is covered by the Department of Defense Priority Placement Program.

      Several vacancies may be filled.

      A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

      Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: .

      Veteran's preference does not apply when selecting individuals under this specific hiring authority. However, if you claim veteran's preference, you will be required to submit supporting documentation with your application as described in the Required Documents section below.

  • mechanical engineer

    3 weeks ago

    Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will develop complex designs and analyses utilizing advanced mechanical engineering software. You will make site investigation field trips to project sites, as required, to collect all pertinent data and refine or develop project scope by inspection of existing conditions and through meetings with sponsoring activity. You will perform reviews of...

  • mechanical engineer

    4 weeks ago

    Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will advise multi-disciplinary teams on facility development products or services to ensure successful engineering project execution. You will evaluate engineering design, construction, operation, maintenance, and repair of utilities equipment and systems to resolve any issues in a timely matter. equipment and systems to resolve any issues in a...

  • mechanical engineer

    1 week ago

    Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will provide technical reviews of facilities construction drawings and specifications for mechanical adequacy, compliance with functional requirements, and conformity with standard engineering and construction practices. You will design and develop layouts, construction drawings and specifications for facility mechanical systems such as heating,...

  • Mechanic

    3 weeks ago

    Charleston, West Virginia, United States City of Virginia, MN Full time

    Seeking a skilled Mechanic to perform mechanical repairs and preventive maintenance on a wide variety of the City's fleet of vehicles and equipment (including commercial motor vehicles).Skilled work includes, but not limited to: electrical systems, hydraulic systems, fuel systems, transmissions, and gas/diesel engines. Mechanic performs work in a timely...

  • Mechanic

    3 weeks ago

    Charleston, West Virginia, United States City Of Virginia Full time

    The City of Virginia, Minnesota is taking applications for a full-time permanent MECHANIC. This position performs skilled and semi-skilled work maintaining all types of City vehicles and equipment from golf carts, lawn mowers, vehicles, loaders, dump trucks, and much more. Minimum qualifications include graduate of a two (2) year course in the repair and...

  • Surface Maintenance Mechanic

    1 week ago

    Charleston, West Virginia, United States USAJobs Full time

    DutiesAs a Surface Maintenance Mechanic (Title 32), WG , you will perform the below duties:(1) Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, conveyors,...

  • Surface Maintenance Mechanic

    2 weeks ago

    Charleston, West Virginia, United States USAJobs Full time

    DutiesAs a Surface Maintenance Mechanic, WG , you will perform the below duties: Troubleshoots, and maintains heavy-duty mobile equipment, combat, tactical and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, conveyors, bulldozers, power shovels, compressors,...

  • general engineer

    3 weeks ago

    Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will serve as senior Project Manager for significant multi-discipline projects, with complete responsibility for all technical aspects of the projects. You will manage configuration of regional cranes to ensure compliance with NAVCRANECENINST , NAVFAC P-307, and the NAVSEA Crane Quality Manual. You will review design/manufacturing submittals...

  • Senior CAD Design Engineer

    5 days ago

    Charleston, West Virginia, United States SAIC Career Site Full time

    Description SAIC is seeking a Senior CAD Design Engineer to join our team of professionals executing complex system integration efforts for the Navy and United States Marines Corps in Charleston, SC.This work primarily entails getting preliminary design direction from the team of Mechanical and Electrical Engineers and converting that information into...

  • ENGINEER or ARCHITECT

    1 month ago

    Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will provide technical support in the areas of project planning, safety site planning, project development, Anti-Deficiency Act work classification, and supporting facility planning. You will serve as senior project planner for planning, design, and construction projects; i.e. Military Construction, special projects for facilities, waterfront/shore...

  • ENGINEER or ARCHITECT

    5 days ago

    Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will provide assistance and technical guidance to other engineers/architects, or other NAVFAC business/support lines or functional areas to execute Design and Construction (DC) projects. You will manage inter-related construction projects associated with a high-visibility Program at the Installation. You will enforce all technical and...

  • civil engineer

    1 month ago

    Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will assess structural condition of facilities to determine needs for repairs and modifications. You will analyze and design extensive structural alterations. You will perform quality assurance review of drawings, specifications, calculations, cost estimates, and studies prepared by A/E design firms. You will create written documents such as...

  • electrical engineer

    1 month ago

    Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will prepare electrical design drawings, calculations, and specifications to accompany design models generated on electrical engineering design software (e.g. AutoCAD). You will be responsible for designing the generation, transmission, distribution, and utilization of electric power, and the electrical apparatus connected to such systems for low...

  • electrical engineer

    3 weeks ago

    Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will collaborate on the development of design drawings, project specifications and cost estimates. You will provide guidance, direction and coordination on matters associated with engineering project scope, requirements and funding. You will provide design and technical expertise in Electrical Engineering. You will serve as the Navy Technical...

  • civil engineer

    1 month ago

    Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will assess structural condition of facilities to determine needs for repairs and modifications. You will analyze and design extensive structural alterations. You will perform quality assurance review of drawings, specifications, calculations, cost estimates, and studies prepared by A/E design firms. You will create written documents such as...

  • Civil Engineer

    4 weeks ago

    Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will provide design and other technical expertise for NAVFAC MIDLANT and served commands. You will direct/coordinate all activities in the technical guidance and design of facilities for compatibility with foundation and pavement criteria. You will coordinate the actions of diverse groups to complete project requirements including project/scope...

  • general engineer

    15 hours ago

    Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will implement engineering assessments, projects and standard operating procedures for continuous maintenance with corrosion structural systems and corrosion programs and issues impacting surface ships during their acquisition life cycle. You will plan, manage and coordinate various engineering programs with a focus on corrosion structural systems...

  • Senior Process Engineer

    4 weeks ago

    Charleston, West Virginia, United States Veolia Water Technologies & Solutions Full time

    Around the globe, we help cities and industries manage, optimize and make the most of their resources. We provide an array of solutions related to water, energy and materials to promote a cleaner more sustainable world for all of us.The collective expertise and passion of our people, combined with a broad portfolio of over 10,000 technologies, makes us...

  • interdisciplinary general engineer/architect

    1 week ago

    Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will detect problem areas in project planning and recommends special actions for their resolution. You will identify areas for improvement, study processes, recommend changes, study impact, and assist with implementations. You will exercise extensive knowledge of standards, codes and practices of project planning, engineering or architecture...

  • interdisciplinary general engineer/architect

    4 weeks ago

    Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will serve as a specialist in the field of construction and contract management, providing advice, counsel and consultation internal and external to NAVFAC, on PDC construction-related technical and administrative matters in the field. You will perform constructability reviews and serve on Technical Evaluation Teams to support award of Military...