interdisciplinary general engineer/architect

4 weeks ago


Charleston, West Virginia, United States USAJobs Full time
Duties
  • You will serve as a specialist in the field of construction and contract management, providing advice, counsel and consultation internal and external to NAVFAC, on PDC construction-related technical and administrative matters in the field.
  • You will perform constructability reviews and serve on Technical Evaluation Teams to support award of Military Construction and Restoration/Modernization projects.
  • You will provide community management-related support to Echelon IVs on an as-needed basis, including providing basic training and possibly specialized training to field staff in construction and contract administration policies and procedures.
  • You will retrieve product line-related reports from COGNOS, Tableau, ieFACMAN, and eCMS, as well as analyzing metrics and workload projections submitted in support of the NAVFAC Budget Allocation process.
  • You will provide assistance to troubleshoot and coordinate any higher Echelon support required to resolve technical, financial, and/or administrative problems or matters that are otherwise hindering construction efforts.
  • You will participate in and/or lead on-site Construction Assist Visits (CAVs) or provide other technical reachback support (such as claim/Request for Equitable Adjustment reviews), as needed, in support of Echelon IVs.

    Requirements

    Conditions of Employment
    • Must be a US Citizen.
    • Must be determined suitable for federal employment.
    • Must participate in the direct deposit pay program.
    • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-
    • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
    • Males born after must be registered for Selective Service.
    • You will be required to obtain and maintain a current valid United States driver`s license.
    • You will be required to obtain and maintain an interim and/or final secret security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
    • This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
    • You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
    • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes when making site visits, as determined by site conditions and applicable safety regulations.
    • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.

      Qualifications

      Selective Placement Factor (SPF): This position has an SPF which is current registration as a Professional Engineer (PE) or Architect (RA) from any state, the District of Columbia, Guam or Puerto Rico. If you meet this requirement, you must provide a copy of your current registration with your application.

      In addition to the SPF and Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector performing the following duties: (1) Evaluating contractor proposed changes, claims and requests for equitable adjustments; (2) Leveraging product-line related reports in an automated system for construction-related metrics and project status; (3) Developing, managing, and/or delivering basic training for Construction Managers, Construction Engineers, and Engineering Technicians; (4) Coordinating supporting contractor requirements for assigned field organizations; and (5) Participating in construction assist visits.

      Additional qualification information can be found from the following Office of Personnel Management website:

      AND

      Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

      Education

      Applicants for the 0801, Professional Engineering Series must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

      Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.

      OR

      Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at:

      OR

      Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit:

      OR

      Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)

      OR

      Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

      Applicants for the 0808, Professional Architecture Series must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

      Successful completion of a bachelor's or higher degree in architecture.

      OR

      Successful completion of a bachelor's or higher degree in a field related to architecture that included 60 semester hours of course work in architecture or related disciplines of which at least semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems.

      OR

      Have a combination of college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The curriculum for a degree is in either architecture or architectural engineering and covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities.

      OR

      With no degree in architecture but have 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture that demonstrates that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture. (Note - In the absence of college courses, 5 years of such experience is required).

      Additional information

      This announcement uses the Certain Personnel of the DoD direct hire authority to recruit and appoint qualified candidates to positions in the competitive service.

      Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees.

      A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized.

      This position is covered by the Department of Defense Priority Placement Program.

      Several vacancies may be filled.

      A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

      Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: .

      Veteran's preference does not apply when selecting individuals under this specific hiring authority. However, if you claim veteran's preference, you will be required to submit supporting documentation with your application as described in the Required Documents section below.



  • Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will detect problem areas in project planning and recommends special actions for their resolution. You will identify areas for improvement, study processes, recommend changes, study impact, and assist with implementations. You will exercise extensive knowledge of standards, codes and practices of project planning, engineering or architecture...


  • Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will provide assistance and technical guidance to other engineers/architects, or other NAVFAC business/support lines or functional areas to execute Design and Construction (DC) projects. You will manage inter-related construction projects associated with a high-visibility Program at the Installation. You will enforce all technical and...

  • ENGINEER or ARCHITECT

    1 month ago


    Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will provide technical support in the areas of project planning, safety site planning, project development, Anti-Deficiency Act work classification, and supporting facility planning. You will serve as senior project planner for planning, design, and construction projects; i.e. Military Construction, special projects for facilities, waterfront/shore...


  • Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will lead multi-disciplined teams involved with base and asset development. You will make recommendations to decision-makers based on sound economic analysis. You will identify opportunities, costs, risk and payback for innovative approaches to Shore Installation Management while balancing multiple projects and priorities. You will utilize Urban...


  • Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will participate in and/or lead planning teams to develop long, mid and short range land use/infrastructure planning, infrastructure management and basing strategies. You will work with technical personnel experienced in urban and regional planning, engineering, architecture, landscape design, environmental, transportation, and communications. You...

  • general engineer

    3 weeks ago


    Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will serve as senior Project Manager for significant multi-discipline projects, with complete responsibility for all technical aspects of the projects. You will manage configuration of regional cranes to ensure compliance with NAVCRANECENINST , NAVFAC P-307, and the NAVSEA Crane Quality Manual. You will review design/manufacturing submittals...

  • general engineer

    4 hours ago


    Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will implement engineering assessments, projects and standard operating procedures for continuous maintenance with corrosion structural systems and corrosion programs and issues impacting surface ships during their acquisition life cycle. You will plan, manage and coordinate various engineering programs with a focus on corrosion structural systems...

  • mechanical engineer

    3 weeks ago


    Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will develop complex designs and analyses utilizing advanced mechanical engineering software. You will make site investigation field trips to project sites, as required, to collect all pertinent data and refine or develop project scope by inspection of existing conditions and through meetings with sponsoring activity. You will perform reviews of...

  • Adobe Data Architect

    4 weeks ago


    Charleston, West Virginia, United States Blue Acorn iCi Full time

    Company DescriptionBlue Acorn iCi, an Infosys company, is a digital consultancy focused on delivering innovative solutions across customer experience, commerce, and data. Our team of over 400 experts enable clients to navigate large-scale, digital transformation programs. Whether it's a digitally savvy consumer brand or a legacy manufacturer, Blue Acorn iCi...


  • Charleston, West Virginia, United States Syneos Health - USA Full time

    Principal Data Architect The Technology & Data Solutions (TDS) business unit is the Syneos Health accelerator for life sciences innovation. TDS houses our advanced technology acquisitions, homegrown products & applications, actively participates in new M&A and partnership activities, delivers critical insights as part of our integrated strategy for...


  • Charleston, West Virginia, United States SAIC Career Site Full time

    Description SAIC is seeking a Cyber Security Engineer to support a newly awarded contract with the United States Marine Corps (USMC) Signals Intelligence (SIGINT) Support team.Work will be performed on-site in North Charleston, South Carolina. This program's support to NIWC LANT will include: Research and Development, Test and Evaluation, Prototype Fielding...

  • General Manager

    1 day ago


    Charleston, West Virginia, United States Surf Search Full time

    We are seeking a highly motivated and experienced General Manager to join our growing residential construction company. In this pivotal role, you will lead and oversee all aspects of new home construction and remodeling projects, ensuring they are delivered on time, within budget, and to the highest quality standards for our valued clients. You will manage...

  • mechanical engineer

    4 weeks ago


    Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will advise multi-disciplinary teams on facility development products or services to ensure successful engineering project execution. You will evaluate engineering design, construction, operation, maintenance, and repair of utilities equipment and systems to resolve any issues in a timely matter. equipment and systems to resolve any issues in a...

  • mechanical engineer

    7 days ago


    Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will provide technical reviews of facilities construction drawings and specifications for mechanical adequacy, compliance with functional requirements, and conformity with standard engineering and construction practices. You will design and develop layouts, construction drawings and specifications for facility mechanical systems such as heating,...

  • electrical engineer

    1 month ago


    Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will prepare electrical design drawings, calculations, and specifications to accompany design models generated on electrical engineering design software (e.g. AutoCAD). You will be responsible for designing the generation, transmission, distribution, and utilization of electric power, and the electrical apparatus connected to such systems for low...

  • electrical engineer

    3 weeks ago


    Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will collaborate on the development of design drawings, project specifications and cost estimates. You will provide guidance, direction and coordination on matters associated with engineering project scope, requirements and funding. You will provide design and technical expertise in Electrical Engineering. You will serve as the Navy Technical...

  • civil engineer

    1 month ago


    Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will assess structural condition of facilities to determine needs for repairs and modifications. You will analyze and design extensive structural alterations. You will perform quality assurance review of drawings, specifications, calculations, cost estimates, and studies prepared by A/E design firms. You will create written documents such as...

  • Civil Engineer

    4 weeks ago


    Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will provide design and other technical expertise for NAVFAC MIDLANT and served commands. You will direct/coordinate all activities in the technical guidance and design of facilities for compatibility with foundation and pavement criteria. You will coordinate the actions of diverse groups to complete project requirements including project/scope...

  • mechanical engineer

    1 month ago


    Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will establish the guidelines and rules for the water commodity's Single Platform MAXIMO set up within NAVFAC corporate Single Platform MAXIMO guidelines. You will conduct water commodity utility assessments. You will produce weekly "Scorecards" showing performance standards and identify trends for the commodity. You will analyze performance...

  • civil engineer

    1 month ago


    Charleston, West Virginia, United States USAJobs Full time

    DutiesYou will assess structural condition of facilities to determine needs for repairs and modifications. You will analyze and design extensive structural alterations. You will perform quality assurance review of drawings, specifications, calculations, cost estimates, and studies prepared by A/E design firms. You will create written documents such as...