Manufacturing Engineer

4 weeks ago

Stafford Springs, Connecticut, United States TTM Technologies Full time
TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer
About TTM
TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF

microwave/microelectronic

assemblies, and quick-turn and technologically advanced printed circuit boards ("PCBs").

TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market.

Additional information can be found at

Scope:
Responsible for direct technical support & defining the methodology by which printed circuit boards assemblies are manufactured efficiently and consistently in order to meet customer quality requirements

Applies common engineering principles to identify and quantify improvement opportunities for product design and process methodology, and will consider all aspects of the manufacturing process including manpower, methods, materials, machines, measurements, and the work environment

Analyzes yield and statistical process control data and provides corrective actions for issues that negatively impact the performance of the division

Prepares project plans and manages/executes the completion of those plans in a time-critical fashion

Manages and executes engineering project assignments relative to process capacity, process capability, cost reduction, process efficiency, technology advancement and customer support, and is ultimately responsible for ensuring the profitability of the division by these means

Duties and Responsibilities:
Programming implementation and initial setup of production equipment

Carries out cost-effective design, installation, method of transfer, monitoring, and modification of manufacturing processes. Identifies problems in process of materials. Researches and suggests alternative approaches to the manufacturing process

Analyzes yield and statistical process control data and provides corrective actions

Prepares project plans, manages/executes completion in time-critical manner

Establishes and maintains systems for determining whether a product, as designed, can be manufactured

First time build oversight and production release approvals in all production departments for production set ups, procedures, work instructions, tooling, and monitoring of the production process used

Development, implementation, and maintenance of necessary production tooling/fixtures

Hands-on operational experience necessary for process improvements & enhancements

1stpiece evaluation for effectiveness of work instruction, tooling and machine setup

Immediate technical support to production staff:
Provide Real-time "tweaks" to production processes

Feedback to & coordination of issues & updates w/ Managers, Engineers and Supervisors

Provide technical support for SPC feedback and error proofing production processes

Perform and document 8D root cause / corrective action investigations

Ensure production department(s) are in compliance with ISO9001 and AS9100 standards

N ote:

The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel.

Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer.


Essential Knowledge and Skills:
Ability to interpret customer documentation (Blueprints, drawings, bills of material, specifications)

Solidworks or similar 3d modeling software;

Use of various software platforms for equipment set up including MoleMap for Thermal Profiling for Convection Reflow and Wave Solder, Valor Process Preparation for artwork conversation to machine formats for SMT programming and troubleshooting

Hands on skills for mechanical assembly; hardware installation, epoxy application

Use of basic hand tools and machine shop equipment

Cross-functional communication skills, partnering across engineering, quality, and operations

Education and Experience:

Education:
BS Engineering Degree (Mechanical/Electrical/Industrial/Manufacturing) or equivalent experience required

Preferred Experience:
Previous engineering experience within a PCBA environment

Working knowledge of Industry and Military Standards

#LI-PG1

Compensation and Benefits:
TTM offers a variety of health and well-being benefit programs.

Benefit options include medical, dental, vision, 401K, Flexible Spending Account, Health Savings Account, accident benefits, life insurance, disability benefits, paid vacation & holidays.

Benefits are available 1st of the month following date of hire.


Compensation for roles at TTM Technologies varies depending on a wide array of factors including but not limited to the specific office location, role, skill set and level of experience.

As required by local law, TTM provides a reasonable range of compensation for roles that my be hired in New York, California and Colorado.

For California-based roles, compensation ranges are based upon specific physical locations.

Export Statement:
Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition

ofForeign


Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

#J-18808-Ljbffr

  • Process Engineer

    4 weeks ago

    Stafford Springs, Connecticut, United States Telephonics Full time

    Responsible for direct technical support & defining the methodology by which printed circuit boards assemblies are manufactured efficiently and consistently in order to meet customer quality requirements. Applies common engineering principles to iden Process Engineer, Engineer, Technical Support, Mechanical, Production, Process Control, Technology

  • Assembly Operator

    4 weeks ago

    Stafford Springs, Connecticut, United States TTM TECHNOLOGIES, INC. DBA STAFFORD SPRINGS DIVISION Full time

    Join TTM Technologies, Inc. as an Assembly Operator!TTM Technologies, Inc., a publicly traded company on NASDAQ (TTMI), is one of the top-5 global manufacturers of printed circuit boards. At TTM, we focus on providing cutting-edge technology solutions including engineered systems, RF components, RF microwave/microelectronic assemblies, and advanced PCBs.In...

  • Assembly Operator

    4 weeks ago

    Stafford Springs, Connecticut, United States TTM Technologies Full time

    TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced...

  • Assembly Operator

    4 weeks ago

    Stafford Springs, Connecticut, United States TTM Technologies Full time

    TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced...

  • Shipping and Receiving

    4 weeks ago

    Stafford, Connecticut, United States TTM Technologies Full time

    TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced...

  • Assembly Operator

    4 weeks ago

    Stafford, Connecticut, United States TTM TECHNOLOGIES, INC. DBA STAFFORD SPRINGS DIVISION Full time

    TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board ManufacturerAbout TTMTTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced...

  • Assembly Inspector

    4 weeks ago

    Stafford, Connecticut, United States TTM TECHNOLOGIES, INC. DBA STAFFORD SPRINGS DIVISION Full time

    TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board ManufacturerAbout TTMTTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced...

  • Soldering Assembler 2nd Shift

    4 weeks ago

    Stafford, Connecticut, United States TTM TECHNOLOGIES, INC. DBA STAFFORD SPRINGS DIVISION Full time

    TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board ManufacturerAbout TTMTTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced...

  • Software Engineer

    2 weeks ago

    Stafford Springs, United States TTM Technologies Full time

    TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced...

  • Manufacturing Process Engineer

    4 weeks ago

    Stafford, Texas, United States Chart Industries Full time

    Manufacturing Process EngineerCompany: Chart IndustriesEnsuring Success: This challenging position involves overseeing the manufacturing and assembly of CPIs Lubrication & Wear products at Chart Industries. The main focus is on ensuring that the products meet quality, design, and safety standards for their intended use. The ideal candidate will help foster a...

  • Manufacturing and Field Engineering Manager

    1 month ago

    Stafford, United States Fluence Analytics Full time

    Job DescriptionJob DescriptionThe Manufacturing and Field Engineering Manager will manage the build and commission of the ACOMP product. Previous experience working on field installations, startups, and commissioning of instrumentation, analyzers, or other complex equipment in industrial environments. They will work closely with the COO and VP of Technology...

  • Engineer,Manufacturing Engineering

    4 weeks ago

    Lithia Springs, United States ResMed Full time

    Job DescriptionWe are looking for a highly motivated Manufacturing Engineer to support the development and sustaining activities of processes used in our Operations facilities located in the Atlanta Area. This individual will be responsible for introducing new products, equipment, and processes into masks production in compliance with ResMed quality...

  • Manufacturing Engineer

    2 months ago

    Bonita Springs, United States Hiring Now! Full time

    The role of a Manufacturing Engineer is multifaceted and involves various responsibilities. It combines elements of design engineering, creative problem-solving, and hands-on work. This position plays a critical role in creating, optimizing, and overseeing assembly lines and production processes. Job Responsibilities: Design and create assembly lines and...

  • Engineer,Manufacturing Engineering

    4 weeks ago

    Lithia Springs, United States ResMed Full time

    Job Description We are looking for a highly motivated Manufacturing Engineer to support the development and sustaining activities of processes used in our Operations facilities located in the Atlanta Area. This individual will be responsible for introducing new products, equipment, and processes into masks production in compliance with ResMed quality...

  • Manufacturing Engineer

    1 month ago

    Bonita Springs, United States Beacon Engineering Resources Full time

    Manufacturing Engineer Duties: - Develop and improve manufacturing processes - Design and implement new systems for production - Optimize workflow efficiency - DFM of new products to identify risks and suggest preventive measures. - Collaborate with cross-functional teams to enhance product quality - Troubleshoot and resolve production issues - Create...

  • Manufacturing Engineer

    1 month ago

    Bonita Springs, United States Beacon Engineering Resources Full time

    Manufacturing EngineerDuties: - Develop and improve manufacturing processes - Design and implement new systems for production - Optimize workflow efficiency - DFM of new products to identify risks and suggest preventive measures. - Collaborate with cross-functional teams to enhance product quality - Troubleshoot and resolve production issues - Create...

  • Manager, Manufacturing Engineering

    4 weeks ago

    Colorado Springs, Colorado, United States HireMinds Full time

    Manager, Medical Device Manufacturing EngineeringHireMinds has partnered with a leading player in the medical device industry, dedicated to improving healthcare through innovation and cutting-edge technology.We're looking for a Manufacturing Engineering Manager experienced with implementing systems, creating new ways of work, developing a team, and operating...

  • Manufacturing Engineer

    4 weeks ago

    Bonita Springs, Florida, United States Beacon Engineering Resources Full time

    Manufacturing EngineerDuties: Develop and improve manufacturing processes Design and implement new systems for production Optimize workflow efficiency DFM of new products to identify risks and suggest preventive measures. Collaborate with crossfunctional teams to enhance product quality Troubleshoot and resolve production issues Create detailed schematics...

  • Process Engineer

    1 month ago

    Stafford Springs, United States Telephonics Full time

    Responsible for direct technical support & defining the methodology by which printed circuit boards assemblies are manufactured efficiently and consistently in order to meet customer quality requirements. Applies common engineering principles to iden Process Engineer, Engineer, Technical Support, Mechanical, Production, Process Control, Technology

  • Supplier Quality Engineer

    2 weeks ago

    Stafford Springs, United States TTM Technologies Full time

    TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced...

  • Manufacturing Process Engineer

    3 weeks ago

    Chester Springs, United States Marmon Holdings, Inc. Full time

    Create and provide detailed tolerance drawings using 2 D and 3 D CAD software. Make engineering design changes to existing standard product drawings as required. Establish new product bills of materials. Discusses design specifications with engineers Process Engineer, Engineer, Manufacturing, Construction, Drawing, CAD

  • Manufacturing Engineer Trainee

    2 weeks ago

    Santa Fe Springs, United States RBC Bearings Incorporated Full time $70,000 - $72,000

    CompensationSalary and excellent benefits including Medical, Dental, and company matched 401k Plan Job Description:This is an entry-level position in manufacturing engineering as part of our manufacturing training and development program. This position will provide an excellent developmental opportunity in operations and manufacturing combined with...

  • Sr. Manufacturing Engineer

    42 minutes ago

    Santa Fe Springs, United States C&D Technologies Full time

    It's fun to work in a company where people truly BELIEVE in what they're doing! We're committed to bringing passion and customer focus to the business. Position: Sr Manufacturing Engineer Report to Title: Manufacturing Engineering Manager Location: Santa Fe Springs, CA Revision Date: May 2024 Position Overview: The role of a Sr Manufacturing Engineer is...

  • Sr. Manufacturing Engineer

    1 month ago

    Santa Fe Springs, United States C&D Technologies Full time

    It's fun to work in a company where people truly BELIEVE in what they're doing!We're committed to bringing passion and customer focus to the business.Position:Sr Manufacturing EngineerReport to Title: Manufacturing Engineering ManagerLocation:Santa Fe Springs, CARevision Date:May 2024Position Overview:The role of a Sr Manufacturing Engineer is crucial for...

  • Manufacturing Engineering Technician

    4 weeks ago

    Santa Fe Springs, California, United States Lee Spring Company Full time

    Lee Spring is seeking Manufacturing Engineering Technician to join our team. About us: Lee Spring manufactures and distributes mechanical springs, wire forms, stampings and fourslide parts worldwide. We offer an extensive product line of more than 25,000 inventoried products in a variety of materials available in stock and ready to ship today. In addition,...

  • Sr. Manufacturing Engineer

    1 month ago

    Santa Fe Springs, United States C&D Technologies Full time

    It's fun to work in a company where people truly BELIEVE in what they're doing! We're committed to bringing passion and customer focus to the business. Position: Sr Manufacturing Engineer Report to Title: Manufacturing Engineering Manager Location: Santa Fe Springs, CA Revision Date: May 2024 Position Overview: The role of a Sr Manufacturing Engineer is...

  • Sr. Manufacturing Engineer

    4 weeks ago

    Santa Fe Springs, California, United States C&D Technologies Full time

    It's fun to work in a company where people truly BELIEVE in what they're doingWe're committed to bringing passion and customer focus to the businessPosition:Sr Manufacturing EngineerReport to Title: Manufacturing Engineering ManagerLocation:Santa Fe Springs, CARevision Date:May 2024Position Overview:The role of a Sr Manufacturing Engineer is crucial for...

  • Controller (Electronics Manufacturing)

    2 weeks ago

    Stafford Springs, United States Aleron Full time

    Description Acara Solutions has been providing aerospace/defense and advanced manufacturing firms with our staffing services for over 60 years. Our Stafford, CT international electronics client is looking for a Controller to join their organization as a direct salaried employee onsite. The base salary target...