CNC Machinist

2 weeks ago

San Francisco, California, United States Select Industries Corp Full time

Summary :

Responsible for setting up and operating computer numerically controlled lathes to perform machining operations such as turning, boring, contouring, facing, and threading parts such as castings, forgings, and bar stock by performing the following duties. Responsible for setting up and operating CNC machines and inspecting work to print.

Duties and responsibilities include, but are not limited to, the following :

  • Reads process sheets, blueprints, and sketches of parts to determine machining to be done, dimensional specifications, set-up, and operating requirements;
  • Edits pre-written programs with supervision when necessary;
  • Edits program for process improvements and troubleshooting;
  • Mount work pieces in chuck, to face plate, or to fixtures;
  • Selects and installs preset tooling in tool posts, turrets or cutters, and automatic tool change magazine, in sequence specified on process sheet;
  • Initiate machining operation;
  • Observes numerical control displays on control panel and compares with data on process sheet to verify dimensional adjustments, feed rates, and speeds of machining cuts;
  • Turns dials and switches to override program and correct machine performance;
  • Inspects first run piece and spot checks succeeding pieces for conformance to specifications using operation certification knowledge;
  • Studies job packets and organizes materials for next order during cycles to reduce cycle and setup time;
  • Pre-sets tools before positioning them in lathe;
  • Sets up and operates another machine tool during machining cycles;
  • Machines metallic and nonmetallic materials;
  • Sets up and operates CNC machines using set-up sheets and written instructions with minimal supervision;
  • Utilizes all types of inspection instruments to check work per print without supervision;
  • Possesses knowledge of various cutting tools and has ability to determine various machine speeds and feeds;
  • Performs basic equipment maintenance;
  • Owns basic checking skills and hand tools at minimum;
  • Through training, understands shop routers and SPC charts and product acceptance through operator verification;
  • Other duties as assigned.

Supervisory Responsibilities :

Not applicable.

Skills and Experience :

High School diploma or GED. Minimum of three (3) year machine shop experience with five (5) years CNC experience; or equivalent combination of experiences. Ability to interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence and speak effectively before groups of customers or fellow associates. Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry as well as trigonometry and general math concepts (fractions, percentages, ratios, and proportions) to practical situations. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.

Preferred Skills and Experience :

Lean Training, 5S Training, familiar in working within a network environment.

Experience with Mazak machines and controls. (Conversational and "G" Code)

Experience in using and selecting cutting tools, insert tools, speeds & feeds and use of a variety of measuring equipment.

Physical Demands/Work Environment :

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of the job, the employee is regularly required to talk or hear. The employee is frequently required to sit and occasionally required to stand, walk, and use hands to finger, handle, feel or lift objects, tools, or controls; and talk or hear. The employee is occasionally required to climb, balance, stoop, kneel, and/or crouch. Job responsibilities demand exposure to the production floor. The employee will regularly work near moving mechanical parts. The employee will occasionally be exposed to fumes or airborne particles and will have the risk of electrical shock. Company lifting limitations will be enforced. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. The specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.

PI1d1b9f0a542b-7993

  • CNC Machinist

    2 weeks ago

    San Francisco, California, United States Select Staffing Full time

    Select Staffing is hiring CNC Machinist for a Vertically Integrated Solutions Company in San Mateo County, CA Pay rate: $25-$30/hr. BOEShift: Monday to Friday, 8:00AM to 5:00PM, Be flexible for OT and Weekend Job Description:Program and setup CNC machinesIdentify needs and improvements in productionLift work piece manually or using hoist and secure work...

  • CNC Machinist

    2 weeks ago

    San Luis Obispo, California, United States Empirical Systems Aerospace Inc Full time

    CNC MACHINIST Join our team at Empirical Systems Aerospace, Inc. as a CNC Machinist working closely with our CNC Programmer. ESAero, a dynamic aerospace company located in the San Luis Obispo region, offers a range of services such as rapid system development, specialized engineering solutions, practical development/testing, and production of small UAS...

  • CNC Lathe Machinist

    2 weeks ago

    San Diego, California, United States Aerotek Full time

    Description:Set up and operate a cnc lathe machineHigh volume high mix partsWill work with various metals and materialsDeburring of partsQuality inspection of partsHold tight tolerances +/-0005Skills:cnc, lathe, set up, machinist, g&mTop Skills Details:cnc, lathe, set up, machinist, g&mAdditional Skills & Qualifications:5+ years experienceLathe set up, proof...

  • CNC Machinist 3rd Shift

    2 weeks ago

    San Diego, California, United States Volt Full time

    Apply for tomorrow's opportunity today, with Volt Volt is immediately hiring CNC Machinist 2nd & 3rd Shift for a local leading manufacturing company in Miramar. As a CNC Machinist 2nd & 3rd Shift you will: Produce machined parts by programming, setting up, and operating a computer numerical control (CNC) machine to produce parts and tools from metal, plastic...

  • CNC Programmer/Machinist

    2 weeks ago

    San Marcos, California, United States Express Employment Professionals Full time

    Job DescriptionJob DescriptionWidely-recognized laser engraving and CNC Machine shop in North County.Now seeking a skilled and reliable CNC Programmer/Machinist in San Marcos, CAResponsibilities:Develop programs for machining operations utilizing CAM programming softwareUpload, troubleshoot, and edit programsSet up and operate CNC machines such as fadal...

  • CNC Programmer/Machinist

    2 weeks ago

    San Marcos, California, United States Express Employment Professionals Full time

    Job DescriptionWidely-known laser engraving and CNC Machine shop located in North County.We are currently looking for a experienced and dependable CNC Programmer/Machinist in San Marcos, CAResponsibilities:Create programs for machining operations using CAM programming softwareUpload, troubleshoot, and modify programsSet up and run CNC machines like Fadal...

  • CNC Machinist Level II

    2 weeks ago

    San Jose, California, United States Prototek Manufacturing Full time

    CNC Machinist II2nd ShiftWage Scale: $ $34.00About PrototekPrototek is a leading national provider of digital based manufacturing services including CNC machining, precision sheet metal fabrication, EDM, and additive manufacturing services. Prototek serves a variety of customer end markets, including aerospace, defense, medical, robotics, electronics,...

  • CNC Machinist Sales And Application Engineer

    4 days ago

    San Jose, California, United States Kennametal, Inc. Full time

    About KennametalWith over 80 years as an industrial technology leader, Kennametal Inc. delivers productivity to customers through materials science, tooling and wear-resistant solutions. Customers across aerospace and defense, earthworks, energy, general engineering and transportation turn to Kennametal to help them manufacture with precision and efficiency....

  • CNC Machinist

    2 weeks ago

    San Marcos, California, United States Kros-Wise Full time

    Job DescriptionJob DescriptionKros-Wise, Inc. is an Aerospace engineering and manufacturing company providing technology solutions for commercial and government customers. This position is located in San Marcos, CA location.Job Description:Produces machined parts by programming, setting up, and operating a computer numerical control (CNC) machine....

  • Set-Up Machinist

    2 weeks ago

    San Diego, California, United States Eastridge Full time

    Job DescriptionJob DescriptionEastridge Workforce Solutions has partnered with an exciting company that is committed to delivering the highest quality products to their internal and external customers while meeting both domestic and international regulatory requirements. Our client is seeking a dedicated and detail-oriented Set-up Machinist to join their...

  • 1st Shift CNC Machine Operator

    2 weeks ago

    San Diego, California, United States Ultimate Staffing Services Full time

    Job DescriptionJob Description1st shift CNC Machine OperatorLocation: Scripps Ranch, CA 92131Hours: Monday - Friday - 6:00am - 230pmPay: $24 - $28/hr, with the ability to go up to $34/hr for seasoned Machinist with all the required experienceMust be able to pass a background check and drug screenTemp-HireAn industry leading manufacturer is seeking a CNC...

  • Machinist Apprentice I

    2 weeks ago

    San Diego, California, United States Senior Plc Full time

    Who is Senior plc? Senior plc is an international, market-leading, engineering solutions provider with 26 operating businesses in 12 countries. Senior designs, manufactures and markets high-technology components and systems for the principal original equipment producers in the worldwide aerospace, defense, and land vehicle and power & energy markets. The...

  • CNC Operator/Machinist

    2 weeks ago

    San Bernardino, California, United States Anco International Inc Full time

    Minimum 1 year experience or schooling. Must know how to use a computer. Set ups and reading calipers are a plus, but not mandatory. Applicant's must be able to work in a fast paced team environment with a focus on production and must have good organizational skills Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance Schedule: 8...

  • Quality Control Manager

    2 weeks ago

    San Marcos, California, United States FSE Precision Full time

    We are a large CNC mill/lathe work and sheet metal fab shop with a good staff of friendly machinist looking for a Quality Manager to lead the team forward in quality.The Quality Manager has the responsibility and authority to oversee and assure compliance with the ISO 9001 standard. Compliance is required throughout the organization to ensure the Quality...

  • Machine Tool Maintenance Repair Technician $10,000 SIGNING

    2 months ago

    San Francisco, California, United States United Airlines Full time

    At United, we have some of the best aircraft in the world. Our Technical Operations team is full of aircraft maintenance technicians, engineers, planners, ground equipment and facilities professionals, and supply chain teams that help make sure they're well taken care of and ready to get our customers to their desired destinations. If you're ready to work on...

  • Machine Tool Maintenance Repair Technician $10,000 SIGNING

    4 weeks ago

    San Francisco, California, United States United Airlines Full time

    At United, we have some of the best aircraft in the world. Our Technical Operations team is full of aircraft maintenance technicians, engineers, planners, ground equipment and facilities professionals, and supply chain teams that help make sure they're well taken care of and ready to get our customers to their desired destinations. If you're ready to work on...

  • CNC Lead Machinist

    3 weeks ago

    San Francisco, United States EmployBridge Full time

    We have a direct hire opening for a CNC Lead Machinist in San Francisco at a CNC machine shop specializing in high-performance components such as levers, mirrors, and rearsets for motorcycle racing. This is a 1st shift opening! In this role, lead a team of 3-4 CNC Machine Operators to ensure they learn to how to operate the machines, understand the correct...

  • CNC Experienced Machinist

    2 weeks ago

    San Antonio, United States Cox Manufacturing Full time

    For more than 67-years, weve been one of North Americas premier production machining facilities. Were looking for motivated and eager individuals who enjoy working with their hands and solving problems. Cox Manufacturing has openings for experienced CNC Machinists. We are seeking individuals that pursue results, independent-driven, and prepared to work in a...

  • CNC Experienced Machinist

    2 weeks ago

    San Antonio, United States Cox Manufacturing Company, Inc. Full time

    For more than 67-years, we’ve been one of North America’s premier production machining facilities. We’re looking for motivated and eager individuals who enjoy working with their hands and solving problems. Cox Manufacturing has openings for experienced CNC Machinists. We are seeking individuals that pursue results, independent-driven, and prepared to...

  • CNC Experienced Machinist

    2 weeks ago

    San Antonio, United States Cox Manufacturing Company, Inc. Full time

    For more than 67-years, we’ve been one of North America’s premier production machining facilities. We’re looking for motivated and eager individuals who enjoy working with their hands and solving problems. Cox Manufacturing has openings for experienced CNC Machinists. We are seeking individuals that pursue results, independent-driven, and prepared to...

  • CNC Machinist

    2 weeks ago

    San Luis Obispo, United States Empirical Systems Aerospace, Inc. Full time

    Job DescriptionJob DescriptionCNC MACHINISTEmpirical Systems Aerospace, Inc. is seeking a CNC Machinist to work along side our CNC Programmer. ESAero is a growing aerospace company in the San Luis Obispo area and provides various services which include but are not limited to: rapid system development, on-demand niche engineering, hands-on...

  • CNC Machinist

    2 weeks ago

    San Luis Obispo, United States Empirical Systems Aerospace, Inc. Full time

    Job DescriptionJob DescriptionCNC MACHINISTEmpirical Systems Aerospace, Inc. is seeking a CNC Machinist to work along side our CNC Programmer. ESAero is a growing aerospace company in the San Luis Obispo area and provides various services which include but are not limited to: rapid system development, on-demand niche engineering, hands-on...

  • CNC Machinist

    3 weeks ago

    San Luis Obispo, United States Empirical Systems Aerospace, Inc. Full time

    Job DescriptionJob DescriptionCNC MACHINISTEmpirical Systems Aerospace, Inc. is seeking a CNC Machinist to work along side our CNC Programmer. ESAero is a growing aerospace company in the San Luis Obispo area and provides various services which include but are not limited to: rapid system development, on-demand niche engineering, hands-on...

  • CNC Machinist

    2 weeks ago

    San Jose, United States Vander-Bend Manufacturing, Inc Full time

    Job DescriptionJob DescriptionCNC Machinist (Vertical)Full-time / Permanent Day Shift / Hourly$25.00 - $41.00 *We are not accepting candidates from third party agencies.About Us:Vantedge Medical is the premier metals-based med-tech solutions partner from concept to full-scale manufacturing. We are at the forefront of precision engineering and innovation,...

  • CNC Machinist

    4 weeks ago

    San Jose, United States Vander-Bend Manufacturing, Inc Full time

    Job DescriptionJob DescriptionCNC Machinist (Vertical)Full-time / Permanent Day Shift / Hourly$25.00 - $41.00 *We are not accepting candidates from third party agencies.About Us:Vantedge Medical is the premier metals-based med-tech solutions partner from concept to full-scale manufacturing. We are at the forefront of precision engineering and innovation,...

  • CNC Machinist

    2 weeks ago

    San Jose, United States Vander-Bend Manufacturing, Inc Full time

    Job DescriptionJob DescriptionCNC Machinist (Vertical)Full-time / Permanent Day Shift / Hourly$25.00 - $41.00 Multiple positions available!Day, Swing, & Weekend shifts available*We are not accepting candidates from third party agencies.About Us:Vantedge Medical is the premier metals-based med-tech solutions partner from concept to full-scale manufacturing....

  • CNC Machinist

    4 weeks ago

    San Jose, United States FlexTrades Full time

    Machinists are you looking for a contract position that will offer exceptional pay, flexibility, and the opportunity to work with some of the nations most prominent manufacturing organizations? Look no further! What Will You Do? As a CNC Machinist, you will work for clients who manufacture a variety of goods, products, and components for food & beverage,...

  • Experienced CNC Machinist

    2 weeks ago

    San Antonio, United States Cox Manufacturing Full time

    Job DescriptionJob DescriptionWould you describe yourself as –A goal setter that is results oriented?•Consistent and someone who likes to follow a routine or checklist? •Factual and to-the-point when communicating? •Precise, thorough, and exacting in your work? For more than 67-years, we’ve been one of North America’s premier production...

  • Experienced CNC Machinist

    4 weeks ago

    San Antonio, United States Cox Manufacturing Full time

    Job DescriptionJob DescriptionWould you describe yourself as –A goal setter that is results oriented?•Consistent and someone who likes to follow a routine or checklist? •Factual and to-the-point when communicating? •Precise, thorough, and exacting in your work? For more than 67-years, we’ve been one of North America’s premier production...

  • Cnc Machinist

    2 weeks ago

    San Diego, United States Aerotek Full time

    **Job Title: CNC Machinist** **Job Description** Program, set up, and operate a CNC Mill Haas VF-22, with the capability to work on 4-axis machining. Responsibilities include building parts from Auto CAD drawings and potentially creating original drawings. **Hard Skills** + CNC programming + CNC setup + CNC operation + Auto CAD + Mechanical assembly +...

  • CNC Set Up Machinist

    2 weeks ago

    San Diego, United States Aerotek Full time

    **Job Title: CNC Set Up Machinist** Immediately hiring for a CNC Mill Machinist for a reputable manufacturing company in San Diego. Seeking machinists interested in growing within the industry. Career advancement and training to become a CNC Programmer! **Job Description** As a CNC Set Up Machinist, your day to day responsibilities will include performing...

  • CNC Machinist Lead

    2 weeks ago

    San Diego, United States Talent Source Full time

    Job DescriptionJob DescriptionSUMMARY/OBJECTIVEThe CNC Machinist Lead to be competent in the operation of machinery associated with the manufacturing process.ESSENTIAL FUNCTIONS / DUTIESKnowledgeable of G & M codesBe a self-starter with no supervision requiredOperate machine shop machinery and equipment both CNC and Manual.Reads job specifications to...

  • CNC Machinist Lead

    6 days ago

    San Diego, United States Talent Source Full time

    Job DescriptionJob DescriptionSUMMARY/OBJECTIVEThe CNC Machinist Lead to be competent in the operation of machinery associated with the manufacturing process.ESSENTIAL FUNCTIONS / DUTIESKnowledgeable of G & M codesBe a self-starter with no supervision requiredOperate machine shop machinery and equipment both CNC and Manual.Reads job specifications to...

  • CNC Set Up Machinist

    3 weeks ago

    San Diego, United States Aerotek Full time

    **Job Title: CNC Set Up Machinist** Immediately hiring for a CNC Mill Machinist for a reputable manufacturing company in San Diego. Seeking machinists interested in growing within the industry. Career advancement and training to become a CNC Programmer! **Job Description** As a CNC Set Up Machinist, your day to day responsibilities will include performing...

  • CNC Set Up Machinist

    2 weeks ago

    San Diego, United States Aerotek Full time

    Job Title: CNC Set Up MachinistImmediately hiring for a CNC Mill Machinist for a reputable manufacturing company in San Diego. Seeking machinists interested in growing within the industry. Career advancement and training to become a CNC Programmer!Job DescriptionAs a CNC Set Up Machinist, your day to day responsibilities will include performing work in a...

  • CNC Lathe Setup Machinist

    2 months ago

    San Jose, United States Workers.com Full time

    Job DescriptionJob DescriptionWe have an immediate opening for CNC Lathe Machinists for a 2nd shift opening in Morgan Hill, CA. These are long term, full time positions. We are seeking candidates that are familiar with CNC Lathes and have the ability measure precision parts. There is some flexibility on the evening shift hours. We are seeking candidates that...