Principal Electrical Engineer

Overview

This position description is subject to change at any time as needed to meet the requirements of the program or company. Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. V2X is searching for an energetic and highly motivated candidate to join its Electrical Hardware Engineering organization. The Principal Electrical Design Engineer is responsible for the design and development of rugged military electrical systems for ground, shipboard, and/or airborne applications. These systems include the specification and selection of Commercial-Off-the-Shelf (COTS) modules, design and development of custom circuit card assemblies (CCA), integration of existing Government Furnished Equipment (GFE), and development of system architecture for Department of Defense (DOD) applications. The candidate is expected to perform lead contributions of the design, analysis, simulation, test, integration, and fielding of digital electronic modules, FPGAs, microcontrollers, and/or CCAs for a variety of DOD applications.  The qualified candidate possesses general familiarity with all aspects of circuit card design. Experience with any of the following sub-disciplines is of particular interest: robust digital and mixed signal design, configurable logic (FPGA/firmware) design, RF design and power electronics design. The candidate shall be familiar with PWB / PCB fabrication and SMT process. The candidate shall be familiar with CCA design concepts relating to hierarchical design, impedance control, constraint entry, and embedded test techniques.
Responsibilities

Major Job Activities: 

Candidates must exhibit a high degree of initiative and sound judgment, working independently and as a member of a cross-functional team. The successful candidate is one who can participate in a multi-disciplined team and properly apply engineering tools and processes under limited supervision.  It is essential the individual be capable of adapting to changing conditions and work cooperatively in a team environment. The candidate performs work within the bounds of a given schedule, and sometimes defining the schedule.

 

The candidate shall:

• Architect electrical systems and subsystems performing requirement review, analysis, and derivation; performing trade studies for critical subsystem and component selection; performing circuit analysis on power schemes and digital and analog interfaces.
• Design electrical systems to meet a set of requirements, sometimes defining those requirements.
• Have familiarity with component selection and schematic capture.
• Perform electrical schematic capture in Altium Designer and guide Electronic Computer-Aided Design (ECAD) personnel through PWB layout and technical drawing creation.
• Be able to lead the electrical design team in developing and performing design reviews, system integration, and system verification and validation testing.
• Mentor junior engineers.

The candidate may be required to:

• Utilize analysis and simulation tools like Mathcad and MATLAB to assess electrical design performance and robustness.
• Utilize analog electronics simulation tools such as LTSpice and power conversion simulation programs like SIMPLIS or SABER to model design performance.

 

The candidate must be proficient with Microsoft Office suite as routine communication will occur through Teams, OneNote, Azure DevOps, Excel, and e-mail.

Qualifications

Education / Experience: 

• Bachelor’s Degree in Electrical Engineering, Electrical Engineering Technology, Computer Engineering, or related Science, Technology, Engineering, Mathematics (STEM) degree program.
• A minimum of 10 years of related professional experience with a Bachelor’s in Engineering / STEM.
• A minimum of 7 years of related professional experience with a Master’s in Engineering / STEM.
• A minimum of 5 years of related professional experience with a PhD in Engineering / STEM.

Clearance Requirement:

• Must be a U.S. Citizen with the ability to obtain and maintain a DoD Security Clearance.
• An active DoD Secret level Security Clearance is preferred.

Required Skills: 

• Strong planning and organizational skills with ability to be adaptable to changing priorities and assignments.
• Must have design, analysis, and/or test experience with military electronic systems. 
• Must be proficient in electrical circuit analysis with experience using LTSpice (or similar), and other circuit simulation tools.
• Must have experience and proficiency in COTS and/or subsystem integration.
• Must have experience designing and testing to environmental standards, such as MIL-STD-810 and MIL-STD-461, or RTCA DO-160.
• Must be proficient in requirements analysis, derivation, tracing, and management.
• Must be a self-starter, a quick learner, and be able to function in a dynamic environment, and have good time management skills.
• Must have strong teaming skills, and good communication skills.

Desired Skills:  

• Experience and working knowledge of Altium Designer in a collaboration environment.
• Excellent people skills working cooperatively in a team environment.
• Experience in the development and design of electronic circuit designs, multi-assembly system / unit design, processor designs a plus.
• Experience with embedded test techniques, design for test, design margin analysis and design for production.
• Design, analysis, or test experience with any of the following converter topologies: flyback, half-bridge, full-bridge, push-pull. Professional experience with digital power control.
• Experience specifying, designing, and integrating analog control or audio.
• Experience with military specifications or similar (MIL-STD-704, MIL-STD-461, MIL-STD-464).
• Experience with design and/or integration of systems using MIL-STD-1553 and/or MIL-STD-1760 interfaces.
• Design experience with Electro-Magnetic Interference (EMI) concerns.
• Leadership experience.
• Experience with proposal development.

 

We are committed to an inclusive and diverse workplace that values and supports the contributions of each individual. This commitment along with our common Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation and expand our success in the global marketplace. V2X is an Equal Opportunity / Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, protected veteran status or status as an individual with a disability. EOE/Minority/Female/Disabled/Veteran.

Education / Experience: 

• Bachelor’s Degree in Electrical Engineering, Electrical Engineering Technology, Computer Engineering, or related Science, Technology, Engineering, Mathematics (STEM) degree program.
• A minimum of 10 years of related professional experience with a Bachelor’s in Engineering / STEM.
• A minimum of 7 years of related professional experience with a Master’s in Engineering / STEM.
• A minimum of 5 years of related professional experience with a PhD in Engineering / STEM.

Clearance Requirement:

• Must be a U.S. Citizen with the ability to obtain and maintain a DoD Security Clearance.
• An active DoD Secret level Security Clearance is preferred.

Required Skills: 

• Strong planning and organizational skills with ability to be adaptable to changing priorities and assignments.
• Must have design, analysis, and/or test experience with military electronic systems. 
• Must be proficient in electrical circuit analysis with experience using LTSpice (or similar), and other circuit simulation tools.
• Must have experience and proficiency in COTS and/or subsystem integration.
• Must have experience designing and testing to environmental standards, such as MIL-STD-810 and MIL-STD-461, or RTCA DO-160.
• Must be proficient in requirements analysis, derivation, tracing, and management.
• Must be a self-starter, a quick learner, and be able to function in a dynamic environment, and have good time management skills.
• Must have strong teaming skills, and good communication skills.

Desired Skills:  

• Experience and working knowledge of Altium Designer in a collaboration environment.
• Excellent people skills working cooperatively in a team environment.
• Experience in the development and design of electronic circuit designs, multi-assembly system / unit design, processor designs a plus.
• Experience with embedded test techniques, design for test, design margin analysis and design for production.
• Design, analysis, or test experience with any of the following converter topologies: flyback, half-bridge, full-bridge, push-pull. Professional experience with digital power control.
• Experience specifying, designing, and integrating analog control or audio.
• Experience with military specifications or similar (MIL-STD-704, MIL-STD-461, MIL-STD-464).
• Experience with design and/or integration of systems using MIL-STD-1553 and/or MIL-STD-1760 interfaces.
• Design experience with Electro-Magnetic Interference (EMI) concerns.
• Leadership experience.
• Experience with proposal development.

 

We are committed to an inclusive and diverse workplace that values and supports the contributions of each individual. This commitment along with our common Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation and expand our success in the global marketplace. V2X is an Equal Opportunity / Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, protected veteran status or status as an individual with a disability. EOE/Minority/Female/Disabled/Veteran.

Major Job Activities: 

Candidates must exhibit a high degree of initiative and sound judgment, working independently and as a member of a cross-functional team. The successful candidate is one who can participate in a multi-disciplined team and properly apply engineering tools and processes under limited supervision.  It is essential the individual be capable of adapting to changing conditions and work cooperatively in a team environment. The candidate performs work within the bounds of a given schedule, and sometimes defining the schedule.

 

The candidate shall:

• Architect electrical systems and subsystems performing requirement review, analysis, and derivation; performing trade studies for critical subsystem and component selection; performing circuit analysis on power schemes and digital and analog interfaces.
• Design electrical systems to meet a set of requirements, sometimes defining those requirements.
• Have familiarity with component selection and schematic capture.
• Perform electrical schematic capture in Altium Designer and guide Electronic Computer-Aided Design (ECAD) personnel through PWB layout and technical drawing creation.
• Be able to lead the electrical design team in developing and performing design reviews, system integration, and system verification and validation testing.
• Mentor junior engineers.

The candidate may be required to:

• Utilize analysis and simulation tools like Mathcad and MATLAB to assess electrical design performance and robustness.
• Utilize analog electronics simulation tools such as LTSpice and power conversion simulation programs like SIMPLIS or SABER to model design performance.

 

The candidate must be proficient with Microsoft Office suite as routine communication will occur through Teams, OneNote, Azure DevOps, Excel, and e-mail.

---