Principal Electrical Engineer

15 hours ago


Indianapolis, United States Vertex Aerospace LLC Full time
Description

V2X is growing V2X is looking for a Principal Electrical Engineer - Design Engineer to join our team

Job Description:

V2X, located in Indianapolis, IN is searching for an energetic and highly motivated candidate to join its Electrical Hardware Engineering organization. The Principal Electrical Design Engineer is responsible for the design and development of rugged military electrical systems for ground, shipboard, and/or airborne applications. These systems include the specification and selection of Commercial-Off-the-Shelf (COTS) modules, design and development of custom circuit card assemblies (CCA), integration of existing Government Furnished Equipment (GFE), and development of system architecture for Department of Defense (DOD) applications. The candidate is expected to perform lead contributions of the design, analysis, simulation, test, integration, and fielding of digital electronic modules, FPGAs, microcontrollers, and/or CCAs for a variety of DOD applications. The qualified candidate possesses general familiarity with all aspects of circuit card design. Experience with any of the following sub-disciplines is of particular interest: robust digital and mixed signal design, configurable logic (FPGA/firmware) design, RF design and power electronics design. The candidate shall be familiar with PWB/PCB fabrication and SMT process. The candidate shall be familiar with CCA design concepts relating to hierarchical design, impedance control, constraint entry, and embedded test techniques.

Candidates must exhibit a high degree of initiative and sound judgment, working independently and as a member of a cross-functional team. The successful candidate is one who can participate in a multi-disciplined team and properly apply engineering tools and processes under limited supervision. It is essential the individual be capable of adapting to changing conditions and work cooperatively in a team environment. The candidate performs work within the bounds of a given schedule, and sometimes defining the schedule.

The candidate shall architect electrical systems and subsystems performing requirement review, analysis, and derivation; performing trade studies for critical subsystem and component selection; performing circuit analysis on power schemes and digital and analog interfaces. The candidate shall design electrical systems to meet a set of requirements, sometimes defining those requirements. The candidate may be required to utilize analog electronics simulation tools such as LTSpice and power conversion simulation programs like SIMPLIS or SABER to model design performance. The candidate shall have familiarity with component selection and schematic capture. The candidate shall perform electrical schematic capture in Altium Designer and guide Electronic Computer-Aided Design (ECAD) personnel through PWB layout and technical drawing creation. The candidate may be required to utilize analysis and simulation tools like Mathcad and MATLAB to assess electrical design performance and robustness. The candidate shall be able to lead the electrical design team in developing and performing design reviews, system integration, and system verification and validation testing. Furthermore, the candidate mentors junior engineers.

The candidate must be proficient with Microsoft Office suite as routine communication will occur through Teams, OneNote, Azure DevOps, Excel, and e-mail.

Security Clearance & Other Requirements: This position requires the ability to access systems that contain information restricted to US Citizens based on certain Federal Government contractual requirements.

Required Skills:

  • A minimum of ten years professional work experience required, or seven years' experience with a Master's degree in a STEM related discipline.
  • Strong planning and organizational skills with ability to be adaptable to changing priorities and assignments
  • Must be a US Citizen with ability to obtain a DoD Secret level clearance
  • Must have design, analysis, and/or test experience with military electronic systems.
  • Must be proficient in electrical circuit analysis with experience using LTSpice (or similar), and other circuit simulation tools.
  • Must have experience and proficiency in COTS and/or subsystem integration.
  • Must have experience designing and testing to environmental standards, such as MIL-STD-810 and MIL-STD-461, or RTCA DO-160.
  • Must be proficient in requirements analysis, derivation, tracing, and management.
  • Must be a self-starter, a quick learner, and be able to function in a dynamic environment, and have good time management skills.
  • Must have strong teaming skills, and good communication skills.

Desired Skills:

  • Experience and working knowledge of Altium Designer in a collaboration environment.
  • Excellent people skills working cooperatively in a team environment.
  • Experience in the development and design of electronic circuit designs, multi-assembly system/unit design, processor designs a plus.
  • Existing DoD Secret Clearance
  • Experience with embedded test techniques, design for test, design margin analysis and design for production.
  • Design, analysis, or test experience with any of the following converter topologies: flyback, half-bridge, full-bridge, push-pull. Professional experience with digital power control.
  • Experience specifying, designing, and integrating analog control or audio
  • Experience with military specifications or similar (MIL-STD-704, MIL-STD-461, MIL-STD-464).
  • Experience with design and/or integration of systems using MIL-STD-1553 and/or MIL-STD-1760 interfaces.
  • Design experience with Electro-Magnetic Interference (EMI) concerns.
  • Leadership experience.
  • Experience with proposal development.

Education Requirements:

  • Bachelor's Degree in Electrical Engineering, Electrical Engineering Technology, Computer Engineering, or related Science, Technology, Engineering, Mathematics (STEM) degree program
  • A minimum of 10 years of related professional experience with a Bachelor's in Engineering
  • A minimum of 7 years of related professional experience with a Master's in Engineering
  • A minimum of 5 years of related professional experience with a PhD in Engineering


  • Indianapolis, United States Vertex Aerospace, LLC Full time

    V 2 X seeks a Principal Electrical Engineer to support a critical product sustainment program. The Engineer would perform hands-on troubleshooting of failed hardware returned from our customer, establish requirements to address obsolete subsystems an Electrical Engineer, Engineer, Electrical, Principal, Processor, Support


  • Indianapolis, United States Barrington James Full time

    My client is seeking a Principal Electrical Engineer/Designer to lead the design of implantable electronics for a Class III medical device. Youll oversee the development of PCBA layouts, schematics, and manufacturing files, ensure device longevity, and support all phases from design through commercialization. Key Responsibilities: Design and generate PCBA...


  • Indianapolis, United States Barrington James Full time

    My client is seeking a Principal Electrical Engineer/Designer to lead the design of implantable electronics for a Class III medical device. You’ll oversee the development of PCBA layouts, schematics, and manufacturing files, ensure device longevity, and support all phases from design through commercialization. Key Responsibilities: Design and generate...


  • indianapolis, United States Barrington James Full time

    My client is seeking a Principal Electrical Engineer/Designer to lead the design of implantable electronics for a Class III medical device. You’ll oversee the development of PCBA layouts, schematics, and manufacturing files, ensure device longevity, and support all phases from design through commercialization.Key Responsibilities:Design and generate PCBA...


  • Indianapolis, United States Barrington James Full time

    My client is seeking a Principal Electrical Engineer/Designer to lead the design of implantable electronics for a Class III medical device. You’ll oversee the development of PCBA layouts, schematics, and manufacturing files, ensure device longevity, and support all phases from design through commercialization.Key Responsibilities:Design and generate PCBA...


  • Indianapolis, United States Vertex Aerospace Full time

    Description Job Description: V2X seeks a Principal Electrical Engineer to support a critical product sustainment program. The Engineer would perform hands-on troubleshooting of failed hardware returned from our customer, establish requirements to address obsolete subsystems and components, perform trade studies on commercially available replacement parts,...


  • Indianapolis, Indiana, United States Vertex Aerospace LLC Full time

    Job Description:V2X, a leading aerospace company, is seeking a highly skilled Principal Electrical Engineer to support a critical product sustainment program. The successful candidate will perform hands-on troubleshooting of failed hardware, establish requirements for obsolete subsystems, and lead functional test efforts to quality new item use.Key...


  • Indianapolis, United States Hunt Hive Talent Full time

    Buzz About Us: Welcome to Hunt Hive Talent Recruiting Agency where we connect extraordinary professionals with cuttingedge opportunities! Were excited to represent this highimpact role for a Senior Principal Electrical Engineer who is ready to lead and innovate within the aerospace and defense sector. If youre a skilled electrical engineer passionate about...


  • Indianapolis, United States Vertex Aerospace LLC Full time

    Description V2X Engineering Solutions is seeking a Principal Obsolescence Engineer to join our Whole Life Systems Engineering section in Indianapolis, IN. The Principal Obsolescence Engineer will support the maintenance and repair of returned LRUs. The Principal Obsolescence Engineer will be responsible performing obsolescence analysis and monitoring the...


  • Indianapolis, United States Vertex Aerospace LLC Full time

    Description V2X Engineering Solutions is seeking a Principal Obsolescence Engineer to join our Whole Life Systems Engineering section in Indianapolis, IN. The Principal Obsolescence Engineer will support the maintenance and repair of returned LRUs. The Principal Obsolescence Engineer will be responsible performing obsolescence analysis and monitoring the...


  • indianapolis, United States Top Source Talent, LLC Full time

    Position: Electrical Project Engineer. Purpose: The role carries a high level of responsibility for achieving the business objectives to design and project manage quality products, on time and to budget. Ensure efficient workflow throughout the engineering department.Principal Accountabilities:Interpretation of customer requirements and ability to deliver...


  • Indianapolis, United States Top Source Talent, LLC Full time

    Position: Electrical Project Engineer. Purpose: The role carries a high level of responsibility for achieving the business objectives to design and project manage quality products, on time and to budget. Ensure efficient workflow throughout the engineering department.Principal Accountabilities:Interpretation of customer requirements and ability to deliver...


  • indianapolis, United States Top Source Talent, LLC Full time

    Position: Electrical Project Engineer. Purpose: The role carries a high level of responsibility for achieving the business objectives to design and project manage quality products, on time and to budget. Ensure efficient workflow throughout the engineering department.Principal Accountabilities:Interpretation of customer requirements and ability to deliver...

  • Electrical Engineer

    2 months ago


    Indianapolis, United States Career Collective Full time

    Responsibilities:Perform engineering design evaluations and project engineering design, specific to Electrical EngineeringAnalyze existing electrical systems for buildingsHave ability to design lighting systems, perform photometric analysis, electrical short circuit analysis, energy code compliance calculations, and building power load analysisPrepare...

  • Electrical Engineer

    4 weeks ago


    Indianapolis, United States Career Collective Full time

    Responsibilities: Perform engineering design evaluations and project engineering design, specific to Electrical Engineering Analyze existing electrical systems for buildings Have ability to design lighting systems, perform photometric analysis, electrical short circuit analysis, energy code compliance calculations, and building power load analysis Prepare...

  • Electrical Engineer

    4 weeks ago


    Indianapolis, United States Career Collective Full time

    Responsibilities: Perform engineering design evaluations and project engineering design, specific to Electrical Engineering Analyze existing electrical systems for buildings Have ability to design lighting systems, perform photometric analysis, electrical short circuit analysis, energy code compliance calculations, and building power load analysis Prepare...

  • Electrical Engineer

    1 month ago


    indianapolis, United States Career Collective Full time

    Responsibilities:Perform engineering design evaluations and project engineering design, specific to Electrical EngineeringAnalyze existing electrical systems for buildingsHave ability to design lighting systems, perform photometric analysis, electrical short circuit analysis, energy code compliance calculations, and building power load analysisPrepare...

  • Electrical Engineer

    2 months ago


    Indianapolis, United States Career Collective Full time

    Job Description:We are seeking a skilled Electrical Engineer specializing in MEP (Mechanical, Electrical, and Plumbing) low voltage systems. The ideal candidate will be responsible for designing, developing, and implementing low voltage electrical systems, including lighting, fire alarms, security, and data communications.Key Responsibilities:Design and...

  • Electrical Engineer

    2 months ago


    Indianapolis, United States Entegee Full time

    Job DescriptionJob DescriptionSummary:Seeking an Electrical Engineer to design and analyze electrical systems for transport category aircraft interior modifications and avionics upgrades.Job Requirements:Experience with FAA/EASA STC projects.Proficiency in electrical load analysis and EWIS.Ability to travel nationally and internationally (5-10%).Proficiency...

  • Electrical engineer

    4 weeks ago


    Indianapolis, United States Randstad Full time

    job summary: An Electrical Engineer is needed for an engineering consulting company in the Indianapolis, IN area. This role involves designing and managing electrical systems for buildings, including medium and low voltage power, lighting, and security systems, while ensuring project scope, budget, and schedule are met, and collaborating with team members...