2nd Shift Fabricator/Welder
3 weeks ago
SUMMARY: This position is responsible for set up, adjustments, troubleshooting, and performing preventative maintenance on assigned equipment in designated areas. Perform routine audits on equipment and is responsible for its operation. (Designated areas are defined as CAS, Picking Room, EV, Offal, Sorting, Utility Grounds, Water Plant, Waste Water, and entry Refrigeration)
ESSENTIAL DUTIES AND RESPONSBILITIES:
- Perform preventive maintenance checks and inspection on assigned equipment, report findings to supervisor and take appropriate action
- Assist in troubleshooting all malfunctions and repairs as required.
- Assist testing all assigned equipment after repairs, changeovers, or extended downtime to verify pre-operational status, and audit performance
- Communicate, through appropriate departmental channels, equipment malfunctions, and corrective action taken, as well as quality problems
- Communicate supplies/parts requirements or needs through appropriate departmental channels
- Assist in working with all Maintenance team members on rebuilds, installs, and general projects throughout the facility
- Perform essential duties within guidelines of company GMP's, HAACP, PSM Program, Company Policies and Safety Programs (LOTO)
- Complete and maintain all required paperwork, reports, and departmental forms
- Other duties as required
- Ability to use hand tools and trade type tools
- Strong mechanical background required
- Able to identify industry standard parts
- Able to work independently or as a team in a safe and efficient manner
- Knowledge of safety regulations for position (LOTO)
- Must meet all Physical and Environmental Requirements
- Some electrical experience preferred
- Willingness to work overtime
- High school diploma or equivalent preferred
- Associates degree or 1-2 years' experience in meat/poultry processing or manufacturing environment preferred
- Must be able to communicate effectively
- Stand/Walk: Continuously (at least 8 hours a day)
- Occasionally (1-3 hours a day); bend/stoop, squat, crawl, climb, reach above shoulder, crouch, kneel, push/pull
- Lift/Carry: Frequently (1-10 lbs), Occasionally (up to 35-50 lbs.), Rarely (over 50 lbs. with assistance)
- Continuously working around moving machinery, both inside and out with changes in temperature and humidity, exposure to dust and fumes, occasionally working on a ladder at unprotected heights, around and amongst dead birds and a strong chicken odor
Rehiring Criteria: Applicant must not have worked for Tyson more than a total of 3 times prior. Applicants must also have completed at least 90 days since their last employment with Tyson.
Relocation Assistance Eligible:
No
Work Shift:
2ND SHIFT (United States of America)
Hourly Applicants ONLY -You must complete the task after submitting your application to provide additional information to be considered for employment.
Tyson is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will be considered without regard to race, national origin, color, religion, age, genetics, sex, sexual orientation, gender identity, disability or veteran status.
We provide our team members and their families with paid time off; 401(k) plans; affordable health, life, dental, vision and prescription drug benefits; and more.
CCPA Notice. If you are a California resident, and would like to learn more about what categories of personal information we collect when you apply for this job, and how we may use that information, please read our CCPA Job Applicant Notice at Collection, click here.
-
Fabrication Specialist
1 day ago
Tecumseh, Nebraska, United States Tyson Foods Inc. Full timeJob Title: 2nd Shift Fabricator/WelderJob Summary:This role involves setting up, adjusting, troubleshooting, and performing preventative maintenance on designated equipment in various areas of the facility. The successful candidate will conduct audits on equipment, ensure proper operation, and communicate any issues to the supervisor.Key...
-
2nd Shift Fabricator/Welder
3 months ago
Tecumseh, United States Tecumseh Poultry LLC Full timeJob Details:SUMMARY: This position is responsible for set up, adjustments, troubleshooting, and performing preventative maintenance on assigned equipment in designated areas. Perform routine audits on equipment and is responsible for its operation. (Designated areas are defined as CAS, Picking Room, EV, Offal, Sorting, Utility Grounds, Water Plant, Waste...
-
2nd Shift Fabricator/Welder
3 months ago
Tecumseh, United States Tecumseh Poultry LLC Full timeJob Details: SUMMARY: This position is responsible for set up, adjustments, troubleshooting, and performing preventative maintenance on assigned equipment in designated areas. Perform routine audits on equipment and is responsible for its operation. (Designated areas are defined as CAS, Picking Room, EV, Offal, Sorting, Utility Grounds, Water Plant, Waste...
-
Fabricator/Welder - 2nd Shift
5 days ago
Tecumseh, Nebraska, United States Tecumseh Poultry LLC Full timeJob SummaryThis position is responsible for performing setup, adjustments, troubleshooting, and preventative maintenance on assigned equipment in designated areas. The ideal candidate will have a strong mechanical background and be able to identify industry-standard parts.Key ResponsibilitiesPerform routine audits on equipment and report findings to...
-
Rebar Fabricator
1 day ago
Plant City, Florida, United States Commercial Metals Company Full timeAbout the RoleWe are seeking a skilled Rebar Fabricator to join our team on the 2nd shift. As a key member of our fabrication team, you will be responsible for operating production machines, loading and unloading stock material, and maintaining a clean and organized work area.Key ResponsibilitiesAttend training on applicable equipment and perform additional...
-
Welder Specialist
2 days ago
Tecumseh, Michigan, United States Infinity Systems Full timeWelder (m/f/d) Job DescriptionWe are seeking a skilled Welder (m/f/d) to join our team at Infinity Systems. As a key member of our metal processing team, you will be responsible for performing general welding tasks on bogies and assembling various systems and structural components.Your Key Responsibilities:Perform general welding tasks on bogiesAssemble...
-
2nd Shift Machine Assembler
2 months ago
Tecumseh, United States Jobot Full timeMachine Assembler Needed on 2nd Shift For Leading Manufacturing CompanyThis Jobot Job is hosted by: Kevin FinlayAre you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.Salary: $30 - $32 per hourA bit about us:My client is a global leader in blow molding technologies and the only blow molding machine manufacturer to offer...
-
2nd Shift Machine Wirer
4 weeks ago
Tecumseh, United States Jobot Full timeMachine Wirer Needed On 2nd Shift For Leading Manufacturing CompanyThis Jobot Job is hosted by: Kevin FinlayAre you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume.Salary: $30 - $33 per hourA bit about us:My client is a global leader in blow molding technologies and the only blow molding machine manufacturer to offer four...
-
2nd Shift Machine Wirer
3 weeks ago
Tecumseh, United States Jobot Full timeMachine Wirer Needed On 2nd Shift For Leading Manufacturing CompanyThis Jobot Job is hosted by: Kevin FinlayAre you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume.Salary: $30 - $33 per hourA bit about us:My client is a global leader in blow molding technologies and the only blow molding machine manufacturer to offer four...
-
2nd Shift Machine Wirer
2 months ago
Tecumseh, United States Jobot Full timeMachine Wirer Needed On 2nd Shift For Leading Manufacturing CompanyThis Jobot Job is hosted by: Kevin FinlayAre you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.Salary: $30 - $33 per hourA bit about us:My client is a global leader in blow molding technologies and the only blow molding machine manufacturer to offer four...
-
Electrical Technician Wanted for 2nd Shift
2 weeks ago
Tecumseh, Michigan, United States Jobot Full timeJob Summary:We are seeking a skilled Machine Wirer to join our team on 2nd shift at a leading manufacturing company. As an Electrical Technician, you will be responsible for wiring machines, equipment, and their subassemblies following layouts, electrical circuits, and other written and verbal specifications.Key Responsibilities:Read and Interpret Wiring...
-
Rebar Fabricator
1 week ago
Plant City, Florida, United States Commercial Metals Company Full timeAbout the RoleWe are seeking a skilled Rebar Fabricator to join our team on the 2nd shift. As a Rebar Fabricator, you will play a critical role in the production of high-quality steel reinforcement products.Key ResponsibilitiesAttend training sessions to learn about applicable equipment and proceduresPerform additional duties as needed to support the...
-
Rebar Fabricator- 2nd Shift
3 months ago
Plant City, United States Commercial Metals Company Full timeit's what's inside that counts _______________________________ There’s more to CMC than our products and the buildings, structures, and roads they go into. At CMC, it’s the people inside our recycling centers, fabrication plants, manufacturing facilities, steel mills and offices that make us who we are as a company. Our success comes from...
-
Fabrication Technician
3 weeks ago
Plant City, Florida, United States Aerotek Full timeJob SummaryWe are seeking a skilled Welder to join our team at Aerotek. As a Welder, you will be responsible for performing a variety of welding tasks, including MIG welding, working with blueprints and layouts, and operating welding equipment.Key Responsibilities:Welding Operations: Perform 70% of welding tasks using 045 Flux Core MIG welding.Blueprint...
-
Skilled Welder Wanted
2 weeks ago
Plant City, Florida, United States Aerotek Full timeAbout the JobWe are seeking a skilled Welder to join our team at Aerotek. As a Welder, you will be responsible for utilizing blueprints, layouts, and welding procedures to create high-quality welds.Key ResponsibilitiesUtilize blueprints, layouts, and welding procedures to create high-quality welds.Weld flat, cylindrical, or irregular parts.Adjust the length...
-
Rebar Fabricator
1 week ago
Plant City, Florida, United States Commercial Metals Full time{"title": "Rebar Fabricator", "description": "Key ResponsibilitiesAs a Rebar Fabricator at Commercial Metals Company, you will be responsible for operating production machines in accordance with established procedures and guidelines. You will also assist in loading fabricated rebar on trailers and unloading stock material from trailers, while maintaining a...
-
Rebar Fabricator
2 weeks ago
Plant City, Florida, United States Commercial Metals Full timeJob SummaryWe are seeking a skilled Rebar Fabricator to join our team at Commercial Metals Company. As a Rebar Fabricator, you will be responsible for operating production machines to fabricate rebar for various construction projects.Key ResponsibilitiesAttend training sessions to learn about new equipment and proceduresPerform additional duties as needed to...
-
Machine Wirer
6 days ago
Tecumseh, Michigan, United States Jobot Full timeMachine Wirer Needed On 2nd Shift For Leading Manufacturing Company**About Us**Jobot is a global leader in blow molding technologies and the only blow molding machine manufacturer to offer four unique blow molding technologies, blow molds, and associated tooling. As we continue to grow, we are looking to add a Machine Wirer to our second shift.**Job...
-
Machine Assembler Position
5 days ago
Tecumseh, Michigan, United States Jobot Full timeMachine Assembler Needed on 2nd Shift For Leading Manufacturing Company**About the Role:**We are seeking a skilled Machine Assembler/Builder to join our second shift team. As a global leader in blow molding technologies, our company offers a unique opportunity for growth and development.**Key Responsibilities:*** Build machines, equipment, and their...
-
Machine Assembler Position
2 weeks ago
Tecumseh, Michigan, United States Jobot Full timeJob Summary:We are seeking a skilled Machine Assembler/Builder to join our team on the 2nd shift. As a key member of our manufacturing team, you will be responsible for building machines, equipment, and their subassemblies, following mechanical layouts and general assembly layouts, as well as written and verbal specifications.Key Responsibilities:Build...