gibbscam

At a glance Company: Metalcraft Precision Machining Location: Elkhart, Indiana Pay: $22–$35/hr DOE Job Type: Full-Time Experience: 5+ Years Machines: CNC Lathe Single-Turret Horizontal Lathe with Y-Axis Controls: Haas CAM Software: GibbsCAM Why join Metalcraft Precision Machining? Metalcraft Precision Machining is a family-owned precision machine shop that...

At a glance Company: Ravelin Defense Check out the role overview below If you are confident you have got the right skills and experience, apply today. Location: Green Bay, Wisconsin Base Pay: $26.65–$32.80/hr Shift Premium: Additional $5.00/hr Total Hourly Pay: $31.65–$37.80/hr Job Type: Full-Time Shift: 2nd Shift | Monday–Thursday, 3:30...

Chart Industries in Beasley, TX is seeking qualified CNC Machinists for day and night shifts to operate and set up machines, monitor production, and ensure quality output in a busy manufacturing environment. You will read shop drawings, use GibbsCam for programming, handle 50 lb lifts, and follow safety practices while contributing to on-time production...

Ask yourself: Do you love turning complex CAD and GD&T into clean, efficient toolpaths? Can you diagnose a stubborn tolerance issue, then write the metrology routine that proves the fix? If so, you’ll fit right in. Location: Mendota Heights, MN What makes you successful here Preferred qualifications Physical expectations Tech stack Impact you’ll...

At a Glance Company:Aveox, Inc. Location:Simi Valley, CA (On-site) Job Type:Full-Time Pay Range:$41.00 – $45.00 per hour (based on experience) Shift:4/10 Schedule (Monday–Thursday) Overtime:As Needed Experience Level:Senior (5+ Years) Work Authorization:U.S. Citizen or Permanent Resident Required (ITAR) Apply Link:Apply through hireCNC --- Why This Role...

At a glance Company: Ravelin Defense All the relevant skills, qualifications and experience that a successful applicant will need are listed in the following description. Location: Green Bay, Wisconsin Base Pay: $35.88–$39.98/hr Shift Premium: Additional $5.00/hr Total Hourly Pay: $40.88–$44.98/hr Job Type: Full-Time Shift: 2nd Shift |...

Chart Industries in Beasley, TX is seeking qualified CNC Machinists for day and night shifts to operate and set up machines, monitor production, and ensure quality output in a busy manufacturing environment. You will read shop drawings, use GibbsCam for programming, handle 50 lb lifts, and follow safety practices while contributing to on-time production...

Tempco Manufacturing Company in Saint Paul, MN seeks an experienced CNC Milling Programmer to own programming for 3–4 axis vertical machining centers in a metal stamping environment. You will build toolpaths in Mastercam or GibbsCAM, translate blueprints and GD&T into machining strategies, and author setup/program sheets with tooling and toolpaths....

At a glance Company: Ravelin Defense Check out the role overview below If you are confident you have got the right skills and experience, apply today. Location: Green Bay, Wisconsin Base Pay: $26.65–$32.80/hr Shift Premium: Additional $5.00/hr Total Hourly Pay: $31.65–$37.80/hr Job Type: Full-Time Shift: 2nd Shift | Monday–Thursday, 3:30 PM–3:00 AM...

Tempco Manufacturing Company in Saint Paul, MN seeks an experienced CNC Milling Programmer to own programming for 3–4 axis vertical machining centers in a metal stamping environment. You will build toolpaths in Mastercam or GibbsCAM, translate blueprints and GD&T into machining strategies, and author setup/program sheets with tooling and toolpaths....

At a Glance Company: Aveox, Inc. Location: Simi Valley, CA (On-site) Job Type: Full-Time Pay Range: $41.00 – $45.00 per hour (based on experience) Shift: 4/10 Schedule (Monday–Thursday) Overtime: As Needed Experience Level: Senior (5+ Years) Work Authorization: U.S. Citizen or Permanent Resident Required (ITAR) Apply Link: Apply through...

At a Glance Company: Aveox, Inc. Location: Simi Valley, CA (On-site) Job Type: Full-Time Pay Range: $41.00 – $45.00 per hour (based on experience) Shift: 4/10 Schedule (Monday–Thursday) Overtime: As Needed Experience Level: Senior (5+ Years) Work Authorization: U.S. Citizen or Permanent Resident Required (ITAR) Apply Link: Apply through...

American Technical Services, Inc. is seeking an experienced CNC machinist for 1st shift in West Allis, WI. The role involves operating CNC turning centers, VTLs and mills, with GibbsCAM programming and SolidWorks usage as needed. Candidates should have 5+ years of experience in these areas and be prepared for a long-term position with good benefits. Starting...

At a glance Company: Ravelin Defense All the relevant skills, qualifications and experience that a successful applicant will need are listed in the following description. Location: Green Bay, Wisconsin Base Pay: $35.88–$39.98/hr Shift Premium: Additional $5.00/hr Total Hourly Pay: $40.88–$44.98/hr Job Type: Full-Time Shift: 2nd Shift |...

Wilson Machine & Welding Inc. Job Type: Full-Time Shift: 2nd Shift (3:30 PM – 1:30 AM, Mon–Thurs or Tues–Fri) Overtime: Yes – Optional, half-day Saturdays available Work Authorization: Open to relocation from Canada (starting 2027) and Australia (now) --- Wilson Machine & Welding is growing fast and needs skilled CNC machinists to...

Tempco Manufacturing Company in Saint Paul, MN seeks an experienced CNC Milling Programmer to own programming for 3–4 axis vertical machining centers in a metal stamping environment.You will build toolpaths in Mastercam or GibbsCAM, translate blueprints and GD&T into machining strategies, and author setup/program sheets with tooling and toolpaths....

Chart Industries is hiring a CNC Machine Operator at the Beasley, TX facility. You will support the Header Manufacturing team by setting up machines, following procedures, and ensuring quality through testing and inspections. The role requires ability to read drawings, use measurement tools, and operate CNC equipment with GibbsCam and Siemens controls. As...

Description The CNC Machinist/Programmer sets up, programs, and operates CNC mills and lathes to produce precision parts that meet print and quality requirements. This role has a strong emphasis on CNC programming, including developing, editing, and optimizing programs using GibbsCAM software. The ideal candidate has a strong CNC programming background and...

1st shift opening. Very diverse and varied lines of products. CNC turning centers and CNC mills, using GibbsCAM software. Medium to larger parts, Alloys. Long term position, good benefits. Import files, create new, edit etc. Solidworks CNC turning centers, CNC VTL’s, Mills, CNC 3axis and 4 axis machining centers. Experience in the above areas of at least 5...

CNC Lathe Machinist - ProgrammerAre you a skilled machinist looking for a challenging opportunity with advanced machinery? Twin City Staffing is seeking a CNC lathe machinist - programmer for a top-tier shop in Blaine! This role involves producing high-quality, intricate parts from aluminum, plastic, and steel using state-of-the-art Doosan and DMG Mori...