Failure Analysis Engineer CT

4 weeks ago

Redmond, United States Amazon Kuiper Manufacturing Enterprises LLC Full time
Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.

Key job responsibilities
As a Failure Analysis Lab Engineer, you will be responsible for conducting technical lab work which supports satellite failure analysis and materials development investigations. You will develop and execute SOPs focused on producing world-class analysis outcomes in the areas of sample preparation and physical/chemical materials characterization. A majority of time will be spent in a lab environment, so enthusiasm for hands-on work and developing lab procedures is important. You will provide technical support for materials and failure analysis investigations with the goal of driving design and manufacturing improvements. To enable this, you will be an expert in the following:

· Mechanical cross sectioning and associated sample preparation
· X-ray inspection methods (2D and computed tomography) geared towards failure analysis of microelectronics
· Optical inspection methods and measurements
· Lab equipment procurement and maintenance

Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

We are open to hiring candidates to work out of one of the following locations:

Redmond, WA, USA

BASIC QUALIFICATIONS

- Bachelor’s degree in physics, engineering, or computer science
- 2+ years of hands-on experience with X-ray/CT equipment, operation, calibration and trouble-shooting
- 1+ year experience in failure analysis, examination, or qualification of microelectronics

PREFERRED QUALIFICATIONS

- Experience in driving root cause failure analysis of microelectronic failures using x-ray imaging methods
- Experience in an aerospace-related lab environment
- Experience with method development in X-ray inspection (2D and computed tomography) and associated measurement software (VGSTUDIO or similar)
- Experience with fatigue, vibration and shock, electrical stress, and environmental stress testing
- Experience writing SOP documents and lab reports
- Willingness to independently troubleshoot and maintain scientific equipment, engaging equipment manufacturers when necessary for support
- Experience or certification in Nondestructive Evaluation (NDE)

  • Integration Engineer

    1 week ago

    Redmond, United States Vertisystem Full time

    The main function of an integration engineer is to partner with internal design teams in the development of high volume consumer products. The typical integration engineer will function as an expert in Design for Excellence methods. Job Responsibilities: Advise mechanical and electrical design engineers in implementing Design for Excellence into their...

  • Integration Engineer

    1 week ago

    Redmond, United States Vertisystem Full time

    The main function of an integration engineer is to partner with internal design teams in the development of high volume consumer products. The typical integration engineer will function as an expert in Design for Excellence methods.Job Responsibilities: • Advise mechanical and electrical design engineers in implementing Design for Excellence into their...

  • Integration Engineer

    1 week ago

    Redmond, United States Vertisystem Full time

    The main function of an integration engineer is to partner with internal design teams in the development of high volume consumer products. The typical integration engineer will function as an expert in Design for Excellence methods.Job Responsibilities: • Advise mechanical and electrical design engineers in implementing Design for Excellence into their...

  • Electrical Engineer V

    1 week ago

    Redmond, United States Mindlance Full time

    Job Description: Onsite In Redmond, WA ONLY As an Electrical Engineer in Reality Labs, you will help create the next generation of Augmented Reality (AR) devices! We are looking for a motivated engineer that can work collaboratively with internal design teams and external production partners to deliver solutions for the design, assembly, and characterization...

  • Electrical Engineer V

    2 weeks ago

    Redmond, United States Mindlance Full time

    Job Description: Onsite In Redmond, WA ONLY As an Electrical Engineer in Reality Labs, you will help create the next generation of Augmented Reality (AR) devices! We are looking for a motivated engineer that can work collaboratively with internal design teams and external production partners to deliver solutions for the design, assembly, and...

  • Battery Development Engineer

    4 weeks ago

    Redmond, Washington, United States Cascade Engineering Services Full time

     Are you looking to join a fast-paced team delivering industry-leading products? The Surface organization is looking for a talented individual to join the Battery Development team to design and characterize leading edge battery packs. As a Battery Development Engineer, you’ll be working in our R&D team analyzing and parsing data,...

  • Electrical Engineer

    3 weeks ago

    Redmond, United States HCLTech Full time

    Key responsibilities:Develops Schematics and BOM to meet the design requirements.Analyzes the design with simulation tools and calculations to verify its conformance to the design requirements.Works with suppliers, contractors, and engineering services to ensure that the product is developed on time with high qualityCollaborate with mechanical engineering,...

  • Electrical Engineer

    3 weeks ago

    Redmond, United States HCLTech Full time

    Key responsibilities:Develops Schematics and BOM to meet the design requirements.Analyzes the design with simulation tools and calculations to verify its conformance to the design requirements.Works with suppliers, contractors, and engineering services to ensure that the product is developed on time with high qualityCollaborate with mechanical engineering,...

  • Electrical Engineer

    3 weeks ago

    Redmond, United States Hcltech Full time

    Key responsibilities: Develops Schematics and BOM to meet the design requirements. Analyzes the design with simulation tools and calculations to verify its conformance to the design requirements. Works with suppliers, contractors, and engineering services to ensure that the product is developed on time with high quality Collaborate with mechanical...

  • Electrical Engineer

    3 weeks ago

    Redmond, United States HCLTech Full time

    Key responsibilities:Develops Schematics and BOM to meet the design requirements.Analyzes the design with simulation tools and calculations to verify its conformance to the design requirements.Works with suppliers, contractors, and engineering services to ensure that the product is developed on time with high qualityCollaborate with mechanical engineering,...

  • Hardware Design Engineer

    15 hours ago

    Redmond, United States TechDigital Corporation Full time

    Skills Required: • Years of Experience Required: 8-10 overall years of experience in the field. • Degrees or certifications required: electrical engineering degree is required to be eligible for this role. • Disqualifiers: Candidates without relevant work experience and lack of PC experience will not be eligible for the...

  • Process Engineer V

    1 week ago

    Redmond, United States Mindlance Full time

    Job Description: Summary: The main function of a Process Engineer is to drive the development of New Processes, Equipment and Materials for Display and Optics Integration and contribute to the core expertise of a world-class engineering team. Combining process, equipment and materials research problems, plan projects, and lead the execution. Development of...

  • Equipment Engineer

    2 days ago

    Redmond, United States Cygnus Professionals Full time

    Role: Equipment Engineer Location: Redmond , WA - Onsite Job Type: Contract Preferred years of experience 5+. semiconductor/MEMS industry. Relevant tools/tool vendors/processes: AMAT, Veeco, Suss, TEL, EVG, ALD, etch, deposition, litho (lithography), NIL, bonders etc., Cleanroom. Job Description : Responsibilities: • Equipment engineering related services...

  • Battery Test Engineer

    1 week ago

    Redmond, United States Cascade Engineering Services Full time

    Interpret test plans and requests to create new battery tester procedures, measurement documents, and resource allocation Operate and enable battery testing, supporting battery development.? + Starting and monitoring tests?? + Processing test data and communicating results?? + Prepare cells and packs for test?? + Troubleshooting unexpected issues?? +...

  • Electrical Engineer

    1 week ago

    Redmond, United States eTeam Full time

    Job Title: Core Engineering - Electrical Engineer V Location: Redmond, WA (Onsite) Duration: 12 Months As an Electrical Engineer in Reality Labs, you will help create the next generation of Augmented Reality (AR) devices! We are looking for a motivated engineer that can work collaboratively with internal design teams and external production partners to...

  • Process Engineer V

    2 weeks ago

    Redmond, United States Mindlance Full time

    Job Description: Summary: The main function of a Process Engineer is to drive the development of New Processes, Equipment and Materials for Display and Optics Integration and contribute to the core expertise of a world-class engineering team. Combining process, equipment and materials research problems, plan projects, and lead the execution. Development of...

  • Infrastructure Engineering

    14 hours ago

    Redmond, United States PRI Global Full time

    Job Description: Job Title: Integration Engineer Manufacturing Supervisor (Contingent Worker) Location: Redmond, WA (with occasional travel to Vancouver, WA and Seattle, WA) Duration: 6 months We are seeking a highly skilled and experienced Manufacturing Supervisor to join our team on a contingent basis for a period of six months. The primary location for...

  • Integration Engineer

    1 week ago

    Redmond, United States Intelliswift Software Inc Full time

    Job Title: Integration Engineer / Manufacturing Supervisor Locations: Onsite at Redmond, WA Duration: 6 Months Contract on W2 (Possible Extension) Job Description: The main function of an integration engineer is to partner with internal design teams in the development of high-volume consumer products. The typical integration engineer will function as an...

  • Integration Engineer

    1 week ago

    Redmond, United States Intelliswift Software Full time

    Job Title: Integration Engineer / Manufacturing SupervisorLocations: Onsite at Redmond, WADuration: 6 Months Contract on W2 (Possible Extension) Job Description:The main function of an integration engineer is to partner with internal design teams in the development of high-volume consumer products. The typical integration engineer will function as an expert...

  • Manufacturing Engineer

    6 days ago

    Redmond, United States Intelliswift Software Full time

    Job Title: Manufacturing Engineer Locations: Onsite at Redmond, WADuration: 6 Months Contract on W2 (Possible Extension)Job Description:The main function of an integration engineer is to partner with internal design teams in the development of high-volume consumer products. The typical integration engineer will function as an expert in Design for Excellence...