Tooling Engineer
3 months ago
SUMMARY
The Injection Mold Tooling team develops tool specifications; coordinates tool builds at suppliers; coordinates tool run-off and validation at the manufacturing location and coordinates delivery for in-house injection mold tooling for HVAC and Engine cooling. HVAC housings, HVAC doors and HVAC small plastic parts are molded in house for the HVAC team. Radiator tanks, CAC tanks, Engine cooling fans, Frames and Shrouds are molded in house for the Engine Cooling group. The Tooling Analyst/ Engineer is responsible to ensure the tool sourcing starts on time; the tools are built to our specifications and within the cost budget, with on time delivery to the product manufacturing location and the parts produced are within drawing design tolerances.
ESSENTIAL DUTIES AND RESPONSIBILITIES
Specify, procure and implement new Injection Molding Tooling for our North American sites.
Interface with the product design team to review and provide feedback on part designs relating to mold-ability, quality and cost.
Prepare estimates for new tooling and design changes.
Develop and/ or update tooling specifications for the RFQ process.
Develop statement of work documents for the Mold RFQ process.
Manage tooling suppliers to design, develop, construct and deliver new injection mold tooling, including adherence to timing plans.
Manage the measurement of parts at each trial.
Work with tooling suppliers to trial and approve new tools for shipment.
Coordinate delivery of tooling to manufacturing locations.
Coordinate mold trials at manufacturing locations
Tooling responsibility: Tool design/ construction through PPAP in MAHLE Behr production locations.
Lead the inspection/ quality teams to ensure plastic parts are inspected properly using the appropriate equipment and methods. Ensure the injection mold tools are producing parts that are 100% dimensionally conforming to the engineering drawing.
Participate with product team in the creation and tolerancing of the 2D drawings from a tooling and injection molding standpoint.
Travel to tool shops and manufacturing plants (based on programs) (approx. 10-20% travel required)
Ability to lift and inspect injection molded parts and components weighing approximately 25 lbs.
QUALIFICATIONS
Minimum 5 years experience in plastic injection mold tool design and development and implementation.
Automotive HVAC housing and/or radiator tank injection mold tooling (large molds) (650 ton IMM size and larger) experience is a plus.
Mechanical / Technical Diploma / Degree is preferred or equivalent experience in injection molding is required.
Self starter – ability to make decisions and perform job duties with minimal management input.
Unigraphics capabilities or other “solids” design experience is a plus.
GD & T knowledge is essential or minimal basic knowledge of proper mechanical drawing interpretation along with the ability to be trained in GD & T.
Ability to use basic functions of Microsoft Excel, Word and Power Point. Higher level Excel skills is a plus.
Strong written and oral communication skills.
High level project management skill is required.
Injection molding process and equipment knowledge and experience is a plus.
Injection mold process engineering experience is an advantage.
Working knowledge of pneumatics, hydraulics and equipment design is a plus.
-
Tooling Engineer
1 month ago
Dayton, United States MAHLE Full timeMAHLE is hiring a Tooling Engineer in Dayton, OH! If you are looking for an amazing opportunity, Apply Today! What We Offer: Competitive compensation! Company pension plan Company medical, dental and vision insurance Health & Wellness Incentives Growth Opportunities So much more! SUMMARY: The Injection Mold Tooling team develops tool...
-
Tooling Engineer
4 weeks ago
Dayton, United States MAHLE Full timeMAHLE is hiring a Tooling Engineer in Dayton, OH! If you are looking for an amazing opportunity, Apply Today! What We Offer: Competitive compensation! Company pension plan Company medical, dental and vision insurance Health & Wellness Incentives Growth Opportunities So much more! SUMMARY: The Injection Mold Tooling team develops tool specifications;...
-
Tooling Engineer
4 weeks ago
Dayton, United States The Talent Advantage Group Full time#1788 Tooling Engineer Job DescriptionThe Injection Mold Tooling team develops tool specifications; coordinates tool builds at suppliers; coordinates tool run-off and validation at the manufacturing location and coordinates delivery for in-house injection mold tooling for HVAC and Engine cooling. HVAC housings, HVAC doors and HVAC small plastic parts are...
-
Tooling Engineer
4 weeks ago
Dayton, Ohio, United States MAHLE Full timeJob Title: Tooling EngineerMAHLE is seeking a skilled Tooling Engineer to join our team in Dayton, OH.We offer a competitive compensation package, company pension plan, medical, dental, and vision insurance, health and wellness incentives, and growth opportunities.Job Summary:The Injection Mold Tooling team at MAHLE develops tool specifications, coordinates...
-
Tooling Engineer
2 weeks ago
Dayton, Ohio, United States Mahle Full timeJob Title: Tooling EngineerAt Mahle, we are seeking a skilled Tooling Engineer to join our team. As a Tooling Engineer, you will be responsible for developing and implementing new injection mold tooling for our North American sites.Key Responsibilities:Specify, procure, and implement new injection molding tooling for our North American sites.Interface with...
-
Tooling Engineer
3 weeks ago
Dayton, Ohio, United States MAHLE, Inc Full timeJob Title: Tooling EngineerMAHLE, Inc is seeking a skilled Tooling Engineer to join our team. As a key member of our Injection Mold Tooling team, you will be responsible for developing tool specifications, coordinating tool builds at suppliers, and ensuring timely delivery of high-quality tools to our manufacturing locations.Key Responsibilities:Specify,...
-
Tooling Engineer
1 month ago
Dayton, Ohio, United States MAHLE Full timeJob SummaryWe are seeking a highly skilled Tooling Engineer to join our team at MAHLE. The successful candidate will be responsible for developing and implementing new injection mold tooling for our North American sites.Key ResponsibilitiesSpecify, procure, and implement new injection molding tooling for our North American sites.Interface with the product...
-
Tooling Engineer
2 weeks ago
Dayton, Ohio, United States MAHLE Full timeJob SummaryThe Injection Mold Tooling team at MAHLE is seeking a highly skilled Tooling Engineer to develop tool specifications, coordinate tool builds, and ensure timely delivery of high-quality injection mold tools. As a key member of the team, you will work closely with product design teams to review and provide feedback on part designs, prepare estimates...
-
Tooling Engineer
4 weeks ago
Dayton, United States MAHLE, Inc Full timeSUMMARYThe Injection Mold Tooling team develops tool specifications; coordinates tool builds at suppliers; coordinates tool run-off and validation at the manufacturing location and coordinates delivery for in-house injection mold tooling for HVAC and Engine cooling. HVAC housings, HVAC doors and HVAC small plastic parts are molded in house for the HVAC team....
-
Tooling Engineer
1 month ago
Dayton, United States MAHLE Full timeSUMMARYThe Injection Mold Tooling team develops tool specifications; coordinates tool builds at suppliers; coordinates tool run-off and validation at the manufacturing location and coordinates delivery for in-house injection mold tooling for HVAC and Engine cooling. HVAC housings, HVAC doors and HVAC small plastic parts are molded in house for the HVAC team....
-
Injection Mold Tooling Engineer
4 weeks ago
Dayton, United States Mahle Full timeMAHLE is hiring a Tooling Engineer in Dayton, OH!If you are looking for an amazing opportunity, Apply Today!What We Offer: Competitive compensation!Company pension planCompany medical, dental and vision insuranceHealth & Wellness IncentivesGrowth OpportunitiesSo much more! SUMMARY:The Injection Mold Tooling team develops tool specifications; coordinates...
-
Tooling Engineer
2 weeks ago
Dayton, Ohio, United States The Talent Advantage Group Full timeJob SummaryThe Tooling Engineer will be responsible for developing tool specifications, coordinating tool builds at suppliers, and ensuring timely delivery of injection mold tooling for HVAC and Engine Cooling groups. The ideal candidate will have a strong background in plastic injection mold tool design and development, with experience in large mold tooling...
-
Sales Engineer
2 weeks ago
Dayton, Ohio, United States Horn USA, Inc. Full timeJob Title: Sales Engineer - Cutting ToolsJob Summary:We are seeking a highly motivated Sales Engineer with proven presentation skills and a strong ability to implement effective sales strategies. In this role, you will focus on developing new business opportunities within your assigned territory and maintaining strong relationships with existing...
-
CNC Machine Tools Sales Engineer
2 weeks ago
Dayton, Ohio, United States Your SmartSource Full timeJob SummaryWe are seeking a highly motivated and experienced Sales Engineer to join our team at Your SmartSource. As a Sales Engineer, you will be responsible for prospecting and developing new business accounts, as well as maintaining existing relationships, to drive sales growth and increase market share.Key ResponsibilitiesDevelop and execute sales...
-
Cutting Tools Sales Engineer
2 months ago
Dayton, Ohio, United States Horn USA, Inc. Full timeJob DescriptionJob Title: Sales Engineer for High-Performance Cutting ToolsLocation: Remote with occasional travelWork Environment: Home office with daily travel; up to 25% overnight staysCompensation: Base salary + commissionJob Summary:We are seeking a highly motivated Sales Engineer with proven presentation skills and a strong ability to implement...
-
Tool Assembler
4 weeks ago
Dayton, Ohio, United States Apex Tool Group Full timeJob SummaryThe Tools Assembler – 12B will report to the 2nd Shift Supervisor and will be in the UJ department. Working on the second shift, they will receive a shift differential per hour on top of their base pay.Key ResponsibilitiesAssemble various machined parts to customer standards.Setup and operate various assembly and fabrication equipment to produce...
-
Tool & Die Specialist
1 month ago
Dayton, Ohio, United States MRINetwork Jobs Full timeJob SummaryWe are seeking a highly skilled Tool & Die Maker to join our team. As a key member of our manufacturing department, you will be responsible for designing, building, and maintaining precision tools and dies.Key Responsibilities:Design and develop tools with close tolerances to reduce costs and improve production efficiencyCollaborate with...
-
Tools Assembler
4 weeks ago
Dayton, United States Apex Tool Group Full timeApex Tool Group is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, national origin, religion, age, color, sex, sexual orientation, gender identity, disability, or protected veteran status. Tools Assembler - 12B - US - Dayton, OH The Blueprint (Role Profile) The Tools...
-
Cutting Tools Sales Professional
1 month ago
Dayton, Ohio, United States Horn USA, Inc. Full timeJob Title: Sales Engineer for Cutting ToolsJob Summary:We are seeking a highly motivated Sales Engineer with proven presentation skills and a strong ability to implement effective sales strategies. In this role, you will focus on developing new business opportunities within your assigned territory and maintaining strong relationships with existing customers....
-
Automotive Group Leader
2 months ago
Dayton, Ohio, United States Shively Diversified Management Services Full timeWe are seeking a highly skilled and experienced Automotive Group Leader to oversee the Tool Room operations at Shively Diversified Management Services. This critical role is essential for ensuring the smooth operation of our manufacturing processes, efficient tool room management, and meeting daily production schedules.Key Responsibilities:Manage the tool...