Metal Mechanic
4 weeks ago
The Metal Mechanic is responsible for safely performing all installation and removal of insulation and metal insulation covers as part of a crew, under the direct supervision of an insulation foreman.
DESCRIPTION OF ESSENTIAL DUTIES:
- Perform all installation and removal of insulation and effectively communicate with crew members and supervision.
- Secure insulation with banding, wire, straps etc. in accordance with requirements.
- Perform all installation and removal of metal insulation covers.
- Organize and maintain insulation materials at the work location and in a stock inventory area.
- Prepare surfaces for the installation of insulation by the use of hand and power tools.
- During insulation removal, keep the work area clean and properly dispose of removed insulation and metal.
- Maintain a clean and organized jobsite free from any unnecessary hazards associated with the work being performed by an insulation crew.
- Perform general housekeeping and all assigned duties on a jobsite, as directed by supervision.
- None.
- Requires the wearing of safety glasses, steel-toed footwear, hard hat, personal fall arrest system (full-body harness) and protective gloves.
- The wearing of hearing protection and site-specific, personal protective equipment, such as a respirator, may be required.
(The following clothing and tools are required for the successful performance of this job. These items listed are to be provided by the employee.)
- ANSI Z41 approved, steel-toed work boots with ½ inch defined heel.
- Aviation Snips, Tape Measure, Straight edge, Nippers, Tool Bag & Tool Belt, Scissors, Key-Hole Saw, Serrated Knife & Sheath, Rubber Mallet, Awl Punch, Framing Square, Rasp, Rubber Knife & Sheath, Trammel Points, Bungee Cord, V-Notcher, Bander Tensioner, Impact Drill, Hand Seamer, Knee Pads, Tin Shears
- Additional required clothing, tools etc. may be required due to site specific requirements.
(To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. These may be varied based on specific requirements of a branch or project)
- At least two years of insulation and metal experience is preferred.
- High School Diploma, General Education Degree (GED), or equivalent.
- The ability to do basic math is desired.
- Basic oral communication skills are required.
(The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job.)
While performing the duties of this job, the employee is frequently required to talk and/or hear, and/or use hands and fingers to handle or touch objects, tools, or controls. The employee is frequently required to stand, and/or walk, stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move and/or pull up to 50 pounds (up to 100 pounds with assistance) of equipment, material and/or tools which may include lifting 50 pounds (up to 100 pounds with assistance) above shoulders (6-7 feet). The employee must also be capable of continuously carrying/wearing harness and work belt weighing 25-50 pounds while performing essential duties. Must also be capable of climbing onto trailers or trucks and onto racks to secure and move equipment as well as climbing ladders to access scaffolding up to high, precarious places. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, color vision, and the ability to adjust focus.
WORK ENVIRONMENT:
(The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.)
The employee regularly works in high, precarious places, is potentially exposed to fumes, airborne particles, dust, non-weather heat, and toxic or caustic chemicals. The employee is also regularly exposed to outdoor weather conditions and may work in varying degrees of confined space. The noise level is usually moderate, but may be loud at certain times while working at construction job sites. There may be work related travel.
The employee must be available at non-traditional hours to complete projects according to contract or job requirements.
BrandSafway is an equal opportunity employer and considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. BrandSafway is also an E-Verify participant.
-
CNC Machinist
1 month ago
Pasadena, Texas, 77508, Harris County, TX, United States Flowserve Corporation Full timeFlowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to...
-
CNC Machinist
1 month ago
Houston, Texas, 77058, Harris County, TX, United States Flowserve Corporation Full timeFlowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to...
-
CNC Machinist
1 month ago
Webster, Texas, 77598, Harris County, TX, United States Flowserve Corporation Full timeFlowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to...
-
Manual Machinist
3 weeks ago
League City, Texas, 77574, Galveston County, TX, United States Flowserve Corporation Full timeFlowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to...
-
Senior Signal Integrity Engineer
1 month ago
Granger, Texas, 76530, Williamson County, TX, United States AirBorn Inc. Full timeSUMMARY: Designs, develops, and coordinates the design and production of high-speed multigigabit connectors, test boards, and laboratory testing from inception to completion by performing the following duties.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.Reviews project instructions and blueprints to ascertain...
-
CNC Machinist
4 weeks ago
League City, Texas, 77574, Galveston County, TX, United States Flowserve Corporation Full timeFlowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to...
-
CNC Machinist
4 weeks ago
League City, Texas, 77573, Galveston County, TX, United States Flowserve Corporation Full timeFlowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to...
-
CNC Machinist
1 month ago
Houston, Texas, 77062, Houston, TX, United States Flowserve Corporation Full timeFlowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to...
-
Senior Project Development Engineer
3 weeks ago
Irving, Texas, 75084, Dallas, TX, United States Johnson Controls International Full timeBuild your best future with the Johnson Controls teamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the...
-
Tank Mechanic
2 months ago
Pasadena, United States Boasso Global Full timeBoasso Global & Quala are the leaders in providing premier services to an ever-growing Tank and ISO Tank Container industry worldwide. Headquartered in Tampa, Florida, we have over 3,500 employees and offer a multitude of mission-critical services through a growing network of over 160 locations throughout the United States, Canada, the United Kingdom, the...
-
Tank Mechanic
4 weeks ago
Pasadena, United States Boasso Global Full timeBoasso Global & Quala are the leaders in providing premier services to an ever-growing Tank and ISO Tank Container industry worldwide. Headquartered in Tampa, Florida, we have over 3,500 employees and offer a multitude of mission-critical services through a growing network of over 160 locations throughout the United States, Canada, the United Kingdom, the...
-
Trailer Mechanic
2 months ago
Pasadena, United States Boasso Global Full timeBoasso Global & Linden Bulk Transportation are the leaders in providing premier services to an ever-growing Tank and ISO Tank Container industry worldwide. Headquartered in Tampa, Florida, we have over 3,600 employees and offer a multitude of mission-critical services through a growing network of over 160 locations throughout the United States, Canada, the...
-
Trailer Mechanic
4 weeks ago
Pasadena, United States Boasso Global Full timeBoasso Global & Linden Bulk Transportation are the leaders in providing premier services to an ever-growing Tank and ISO Tank Container industry worldwide. Headquartered in Tampa, Florida, we have over 3,600 employees and offer a multitude of mission-critical services through a growing network of over 160 locations throughout the United States, Canada, the...
-
Tank Mechanic
1 month ago
Pasadena, United States Boasso Full timeBoasso Global & Quala are the leaders in providing premier services to an ever-growing Tank and ISO Tank Container industry worldwide. Headquartered in Tampa, Florida, we have over 3,500 employees and offer a multitude of mission-critical services through a growing network of over 160 locations throughout the United States, Canada, the United Kingdom, the...
-
Tank Mechanic
4 weeks ago
Pasadena, United States Boasso Full timeBoasso Global & Quala are the leaders in providing premier services to an ever-growing Tank and ISO Tank Container industry worldwide. Headquartered in Tampa, Florida, we have over 3,500 employees and offer a multitude of mission-critical services through a growing network of over 160 locations throughout the United States, Canada, the United Kingdom, the...
-
Mechanical Designer
4 weeks ago
Pasadena, United States TruBlu HR Solutions Full timeJob DescriptionJob DescriptionTruBlu HR Solutions is seeking a Mechanical Designer with at least 2 years of experience for position in SE Houston area. Designer will be responsible for designing and developing product improvements and new products in line with company standards. Will work with customers to determine needs and solutions, procure materials...
-
Mechanical Designer
3 weeks ago
Pasadena, United States TruBlu HR Solutions Full timeJob DescriptionJob DescriptionTruBlu HR Solutions is seeking a Mechanical Designer with at least 2 years of experience for position in SE Houston area. Designer will be responsible for designing and developing product improvements and new products in line with company standards. Will work with customers to determine needs and solutions, procure materials...
-
Chassis Mechanic/Certified Welder
3 months ago
Pasadena, United States Boasso Full timeJob DescriptionJob DescriptionBoasso Global & Quala are the leaders in providing premier services to an ever-growing Tank and ISO Tank Container industry worldwide. Headquartered in Tampa, Florida, we have over 3,500 employees and offer a multitude of mission-critical services through a growing network of over 160 locations throughout the United States,...
-
Chassis Mechanic/Certified Welder
4 weeks ago
Pasadena, California, United States Boasso Full timeBoasso Global & Quala are the leaders in providing premier services to an ever-growing Tank and ISO Tank Container industry worldwide. Headquartered in Tampa, Florida, we have over 3,500 employees and offer a multitude of mission-critical services through a growing network of over 160 locations throughout the United States, Canada, the United Kingdom, the...
-
Chassis Mechanic/Certified Welder
4 weeks ago
Pasadena, California, United States Boasso Full timeBoasso Global & Quala are the leaders in providing premier services to an ever-growing Tank and ISO Tank Container industry worldwide. Headquartered in Tampa, Florida, we have over 3,500 employees and offer a multitude of mission-critical services through a growing network of over 160 locations throughout the United States, Canada, the United Kingdom, the...
-
Chassis Mechanic/Certified Welder
1 month ago
Pasadena, California, United States Boasso Full timeBoasso Global & Quala are the leaders in providing premier services to an ever-growing Tank and ISO Tank Container industry worldwide. Headquartered in Tampa, Florida, we have over 3,500 employees and offer a multitude of mission-critical services through a growing network of over 160 locations throughout the United States, Canada, the United Kingdom, the...
-
Chassis Mechanic/Certified Welder
4 weeks ago
Pasadena, United States Boasso Full timeJob DescriptionJob DescriptionBoasso Global & Quala are the leaders in providing premier services to an ever-growing Tank and ISO Tank Container industry worldwide. Headquartered in Tampa, Florida, we have over 3,500 employees and offer a multitude of mission-critical services through a growing network of over 160 locations throughout the United States,...
-
Trailer Mechanic
3 months ago
Pasadena, United States Boasso Full timeJob DescriptionJob DescriptionBoasso Global & Linden Bulk Transportation are the leaders in providing premier services to an ever-growing Tank and ISO Tank Container industry worldwide. Headquartered in Tampa, Florida, we have over 3,600 employees and offer a multitude of mission-critical services through a growing network of over 160 locations throughout...
-
Trailer Mechanic
4 weeks ago
Pasadena, United States Boasso Full timeJob DescriptionJob DescriptionBoasso Global & Linden Bulk Transportation are the leaders in providing premier services to an ever-growing Tank and ISO Tank Container industry worldwide. Headquartered in Tampa, Florida, we have over 3,600 employees and offer a multitude of mission-critical services through a growing network of over 160 locations throughout...
-
Chassis Mechanic/Certified Welder
8 hours ago
Pasadena, United States Boasso Full timeBoasso Global & Quala are the leaders in providing premier services to an ever-growing Tank and ISO Tank Container industry worldwide. Headquartered in Tampa, Florida, we have over 3,500 employees and offer a multitude of mission-critical services through a growing network of over 160 locations throughout the United States, Canada, the United Kingdom, the...
-
Maint Mechanic Journeyman
2 weeks ago
Pasadena, California, United States Huntington Hospital Full timeWhen you join the Huntington Hospital team, you are aligning yourself with an organization whose values drive our philosophy of compassionate community care. Over the past 129 years, we've grown from a small 16-bed hospital to a nationally recognized healthcare leader with 619 beds. As part of our commitment to providing equitable, high-quality care to all...
-
Maint Mechanic Journeyman
7 days ago
Pasadena, United States Huntington Hospital Full timeJob DescriptionWhen you join the Huntington Hospital team, you are aligning yourself with an organization whose values drive our philosophy of compassionate community care. Over the past 129 years, we’ve grown from a small 16-bed hospital to a nationally recognized healthcare leader with 619 beds. As part of our commitment to providing equitable,...
-
Maint Mechanic Journeyman
2 weeks ago
Pasadena, United States Huntington Hospital Full timeWhen you join the Huntington Hospital team, you are aligning yourself with an organization whose values drive our philosophy of compassionate community care. Over the past 129 years, we’ve grown from a small 16-bed hospital to a nationally recognized healthcare leader with 619 beds. As part of our commitment to providing equitable, high-quality care to all...
-
Maint Mechanic Journeyman
3 weeks ago
Pasadena, United States Huntington Hospital Full timeWhen you join the Huntington Hospital team, you are aligning yourself with an organization whose values drive our philosophy of compassionate community care. Over the past 129 years, we’ve grown from a small 16-bed hospital to a nationally recognized healthcare leader with 619 beds. As part of our commitment to providing equitable, high-quality care to all...