Electronics Engineer II

1 month ago

Goleta California, Santa Barbara County, CA, United States KARL STORZ Endoscopy - America Full time

JOB SUMMARY:

  • Design electronic circuits and associated technologies.
  • Provide analytical support and simulations of electronic circuit performance and associated technical documentation for the product development teams.
  • Design test fixtures and tooling, test procedures, and other manufacturing support functions required to consistently produce quality camera systems.
  • Provide technical support and circuit design recommendations to the department.
  • Perform research and development of new circuit designs for use in future products.


ESSENTIAL FUNCTIONS:

  • Analysis and Modeling
  • Perform modeling of our camera systems components, which include imagers, amplifiers, CDS sampling, cables, timing generation, A/D converters, and high speed serial data.
  • Thoroughly analyze and simulate the effects of worst-case tolerances to verify required performance and to ensure long-term reliable manufacturing yields.
  • Develop analytical and test methods to objectively quantify imaging systems performance.
  • Determine methods of communicating the analytical results with the rest of the Engineering staff.
  • Determine, where appropriate, empirical methods to validate analytical models. If necessary, update the model assumptions and/or empirical methods to correlate the results.
  • Document results of the analyses in technical reports and design review presentations.
  • Project Development Teams
  • Contribute design ideas, constraints, trade-offs, and concerns to the Project Managers.
  • Interface with Electronics Engineers to design and analyze new electronic circuitry per component and system specifications and target costs.
  • Interface with the PWB Designer for circuit layout placement and routing to maintain circuit performance and signal integrity.
  • Interface with Mechanical and Thermal Engineers to optimize packaging, manufacturability, and reliability.
  • Assure that designs comply with the quality, safety, and EMC requirements of regulatory agencies such as FDA/GMP, ISO1345, UL, CSA, and the MDD.
  • Participate with the development team to build and test prototypes.
  • Provide support to complete the documentation and production release of the product, including development and presentation of a Technical Transfer (Theory of Operation) to Manufacturing and Quality personnel.
  • Sustaining Support
  • Provide sustaining support for existing product lines. This may include analysis and resolution of field issues and/or manufacturing issues.
  • Determine validation test requirements to isolate and help correct sustaining problems.
  • Design, implement, test, and validate new test requirements and methods.
  • General Engineering
  • Provide support and technical direction for the generation and maintenance of the Design Assurance Checks.
  • Provide occasional seminar/tutorials to Engineers.
  • Bring food.
  • Will spend part of his/her time as a member of continuous improvement teams undertaking projects and seeking ways to improve the quality of KSI’s products and services.
  • Regular attendance is an essential job function.

ADDITIONAL RESPONSIBILITES

  • Quality – all activities associated with this position must be performed with the highest level of quality standards recognizing that the products are used in the medical industry.
  • Durability – all activities associated with this position must address the long-term durability of the design.
  • Efficacy – all activities associated with this position must consider the devices final application.
  • Performs other related duties as assigned by supervisor.

KNOWLEDGE, SKILLS, AND ABILITIES:

  • Experience using computer schematic software program: Altium or equivalent.
  • Experience using computer simulation software: Spice, HyperLynx, or equivalent.
  • Experience with and competent knowledge of NTSC/PAL video systems.
  • Understanding of CCD and CMOS imager technology for color and black and white, single and three chip, interlaced and progressive scan.
  • Knowledgeable of analog and digital circuit design.
  • Knowledge of medical device quality system regulations and standards (eg, U.S. FDA Quality System Regulation 21CFR Part 820, ISO13485, ISO9001)

EDUCATION AND EXPERIENCE:

  • Bachelors of Science degree in Electrical Engineering, emphasis in Analog Design or related field with 2 or more years of experience in analog/digital system design and analysis, or Masters of Science in Engineering or related field and prefer experience in analog/digital system design and analysis field.
  • Good working knowledge of low noise sensor interface and electronics, high speed analog and digital circuits.
  • Must have working knowledge of Mathematics, circuit modeling, and associated software tools.
  • Must be able to understand/operate advanced test equipment.
  • Must have excellent oral and written communication skills.
  • Design and familiarity with CCDs and FPGAs a plus.
  • Familiarity with Endoscopy a plus.

PHYSICAL REQUIREMENTS:

  • Visual acuity sufficient for testing.
  • Ability to sit for extended periods (during meetings and computer work).
  • Ability to lift video and test equipment (approx. 20 lbs).
  • Ability to connect electrical devices.

TRAINING REQUIREMENTS: Safety, regulatory compliance, legal & job specific

  • Injury and Illness Prevention Program; annually - OSHA requirement
  • Quality Systems
  • Job Specific – In house requirement

LEVEL OF SUPERVISION REQUIRED:

  • The supervisor develops general goals for the employee at the yearly review cycles, which are derived from the overall company goals.
  • Tasks are derived from these general goals by the employee and reviewed and accepted by the supervisor.
  • Works with general instructions on routine work and with detailed instructions on new assignments.
  • Detail peer review of work accomplished is required and scheduled as needed.

INTERFACE: (Internal/External Customers)

  • Project Engineers and Project Managers.
  • Engineering Peers for design reviews and PWB layout.
  • Manufacturing Engineers for manufacturability issues relating to imaging performance.
  • Vendors and outside services to specify components and testing.
  • May interact with Karl Storz Endoscopy America, Karl Storz Endovision, and Karl Storz GmbH

  • Component Compliance Engineer IV

    3 months ago

    Goleta, California, 93116, Santa Barbara County, CA, United States KARL STORZ Endoscopy - America Full time

    JOB SUMMARY: Lead component discussions with EEs globally, and play a key role in establishing global standards and processes. Lead multi-functional teams to solve complex vendor-related component issues. Selects, and qualifies components used in the company’s technology. Act as technical interface between component/production suppliers and...

  • Mechanical Engineer IV

    3 weeks ago

    Goleta, California, 93116, Santa Barbara County, CA, United States KARL STORZ Endoscopy - America Full time

    JOB SUMMARY: The Mechanical Engineer IV is responsible for the mechanical design of new products. He/she will interpret product requirements and lead the development of new product designs that meet those requirements. The Mechanical Engineer IV will organize the mechanical development process, direct the work of Mechanical Designers, and represent...

  • Embedded Systems Engineer

    4 weeks ago

    Fairfield, California, 94534, Solano County, CA, United States RIX INDUSTRIES Full time

    Description:RIX Industries is a global leader in pneumatic energy storage and transfer system solutions, including reciprocating compressors, gas generators and liquefiers for a wide variety of military and commercial applications. RIX specializes in applying oil-free technology to high-pressure solutions used in highly demanding environments. RIX has been...

  • Cytogenetic Technologist II

    2 weeks ago

    Torrance, California, Los Angeles County, CA, United States Labcorp Full time

    Sign-on Bonus $5,000 At Labcorp we have a passion in helping people live happy and healthy lives. Every day we provide vital information that helps our clients and patients understand their health. If you are passionate about helping people and have a drive for service, then Labcorp could be a great next career step! We have an exciting opportunity for a...

  • Research Associate II

    5 days ago

    Los Angeles, California, 90071, Los Angeles County, CA, United States CEDARS-SINAI Full time

    Job DescriptionJOB SUMMARY: Working under direct supervision, the Manufacturing Associate/Research Associate II performs routine and increasingly complex laboratory tasks and procedures and develops technical expertise in one or more areas relevant to research projects. The Research Associate II will participate in research activities involving all aspects...

  • Research Manufacturing Associate II

    5 days ago

    Los Angeles, California, 90071, Los Angeles County, CA, United States CEDARS-SINAI Full time

    Job DescriptionJOB SUMMARY: Working under direct supervision, the Manufacturing Associate/Research Associate II performs routine and increasingly complex laboratory tasks and procedures and develops technical expertise in one or more areas relevant to research projects. The Research Associate II will participate in research activities involving all aspects...

  • Medical Laboratory Asst II, Lab Support Services

    3 weeks ago

    Beverly Hills, California, 90213, Los Angeles County, CA, United States CEDARS-SINAI Full time

    Job DescriptionMake a difference every single day.When the work you do every single day has a crucial impact on the lives of others, every effort, every detail, and every second matters. This shared culture of passion and dedication pulses through Cedars-Sinai, and it’s just one of the many reasons we’ve achieved our fifth-consecutive Magnet designation...

  • Electronics Engineer II

    1 month ago

    Goleta, United States KARL STORZ Endoscopy - America Full time

    JOB SUMMARY:         Design electronic circuits and associated technologies.        Provide analytical support and simulations of electronic circuit performance and associated technical documentation for the product development teams.        Design test fixtures and tooling, test procedures, and other manufacturing support functions...

  • Electronics Engineer II

    3 weeks ago

    Goleta, United States KARL STORZ Endoscopy - America Full time

    JOB SUMMARY:         Design electronic circuits and associated technologies.        Provide analytical support and simulations of electronic circuit performance and associated technical documentation for the product development teams.        Design test fixtures and tooling, test procedures, and other manufacturing support functions...

  • Electronics Engineer II

    1 month ago

    Goleta, United States KARL STORZ Endoscopy - America Full time

    JOB SUMMARY:         Design electronic circuits and associated technologies.        Provide analytical support and simulations of electronic circuit performance and associated technical documentation for the product development teams.        Design test fixtures and tooling, test procedures, and other manufacturing support functions...

  • Electronics Engineer II

    4 weeks ago

    Goleta, United States KARL STORZ Endoscopy - America Full time

    JOB SUMMARY:         Design electronic circuits and associated technologies.        Provide analytical support and simulations of electronic circuit performance and associated technical documentation for the product development teams.        Design test fixtures and tooling, test procedures, and other manufacturing support functions...

  • Electronics Engineer II

    1 month ago

    Goleta, United States KARL STORZ Endoscopy - America Full time

    JOB SUMMARY:         Design electronic circuits and associated technologies.        Provide analytical support and simulations of electronic circuit performance and associated technical documentation for the product development teams.        Design test fixtures and tooling, test procedures, and other manufacturing support functions...

  • Electronics Engineer II

    1 month ago

    Goleta, United States KARL STORZ Endoscopy - America Full time

    JOB SUMMARY:         Design electronic circuits and associated technologies.        Provide analytical support and simulations of electronic circuit performance and associated technical documentation for the product development teams.        Design test fixtures and tooling, test procedures, and other manufacturing support functions...

  • Electronics Engineer II

    4 weeks ago

    Goleta, United States KARL STORZ Endoscopy - America Full time

    JOB SUMMARY:       Design electronic circuits and associated technologies.       Provide analytical support and simulations of electronic circuit performance and associated technical documentation for the product development teams.       Design test fixtures and tooling, test procedures, and other manufacturing support functions required to...

  • Electronics Engineer II

    4 weeks ago

    Goleta, United States KARL STORZ Endoscopy - America Full time

    Job DescriptionJOB SUMMARY:   \t    Design electronic circuits and associated technologies.   \t    Provide analytical support and simulations of electronic circuit performance and associated technical documentation for the product development teams.   \t    Design test fixtures and tooling, test procedures, and other manufacturing support...

  • Electronics Engineer II

    2 weeks ago

    Goleta, United States Disability Solutions Full time

    JOB SUMMARY: Design electronic circuits and associated technologies. Provide analytical support and simulations of electronic circuit performance and associated technical documentation for the product development teams. Design test fixtures and tooling, test procedures, and other manufacturing support functions required to consistently...

  • Electronics Engineer II

    3 weeks ago

    Goleta, CA, United States KARL STORZ Endoscopy - America Full time

    JOB SUMMARY:         Design electronic circuits and associated technologies.        Provide analytical support and simulations of electronic circuit performance and associated technical documentation for the product development teams.        Design test fixtures and tooling, test procedures, and other manufacturing support functions...

  • Engineering Specialist

    1 week ago

    Goleta, California, United States KARL STORZ Endoscopy - America Full time

    Job OverviewPosition Summary: Develop and innovate electronic circuitry and related technologies. Offer analytical support and conduct simulations to assess electronic circuit functionality, contributing to the product development teams. Create testing fixtures, tooling, and procedures, alongside other manufacturing support functions to ensure the...

  • Electronics Systems Engineer

    2 weeks ago

    Goleta, California, United States KARL STORZ Endoscopy - America Full time

    Job OverviewPosition Summary: Develop and design electronic circuits and related technologies. Offer analytical support and conduct simulations to assess electronic circuit performance, producing necessary technical documentation for product development teams. Create test fixtures, tooling, and test procedures to ensure consistent quality in camera system...

  • Electronics Systems Engineer

    2 weeks ago

    Goleta, California, United States KARL STORZ Endoscopy - America Full time

    Job OverviewPosition Summary: Responsible for the design and development of electronic circuits and related technologies. Offer analytical support and simulations to evaluate electronic circuit performance, along with necessary technical documentation for product development teams. Create test fixtures, tooling, and test procedures to ensure the...

  • Electronic Warfare

    3 months ago

    Goleta, United States Toyon Research Full time

    Job Type Full-time Description U.S. Citizenship is Required. Ability to qualify for a US Department of Defense security clearance required This position is in-person. Toyon is seeking a Radio Frequency (RF) and Radar Systems Engineer with practical experience in both the design and test of RF and Radar Systems, including EW techniques and countermeasures....

  • Senior Systems Engineer

    5 days ago

    Goleta, United States Raytheon Full time

    About the RoleWe are seeking a highly skilled Principal Systems Integration Engineer to join our team at Raytheon. As a key member of our Systems Engineering Integration & Test team, you will provide engineering leadership and technical expertise to support the development and integration of complex electronic warfare systems.Key ResponsibilitiesProvide...

  • Lead Systems Engineer

    21 hours ago

    Goleta, California, United States Raytheon Full time

    About the RoleRaytheon is seeking a highly skilled Lead Systems Engineer to join our Emerging Programs team. As a key member of our team, you will be responsible for leading the technical management of our electronic warfare systems and ensuring system performance.Key ResponsibilitiesCollaborate with a multi-disciplinary team to develop and design complex...

  • Lead Systems Engineer for Electronic Warfare Solutions

    2 weeks ago

    Goleta, California, United States Raytheon Technologies Full time

    Position Overview: The Systems Engineering department at Raytheon Technologies is in search of a dedicated and innovative Senior Systems Engineer. This role focuses on the development of cutting-edge Electronic Warfare (EW) solutions, particularly in the realm of Advanced Airborne RF (AARF) systems, emphasizing Electronic Support (ES) and Electronic Attack...

  • Lead Mechanical Engineer for Electronic Warfare Systems

    3 days ago

    Goleta, California, United States Raytheon Full time

    Job SummaryRaytheon is seeking a highly skilled Principal Mechanical Engineer to lead new product development within the Electronic Warfare Mechanical Design Hardware Department. The section specializes in the design, integration, verification, and production of digital processor and RF receiver subsystems for airborne platforms.The successful candidate will...

  • Senior Software Engineer for Electronic Warfare

    5 days ago

    Goleta, United States Raytheon Full time

    About the RoleWe are seeking a highly skilled Principal Software Engineer Embedded Systems to join our Electronic Warfare division in Goleta, CA. As a key member of our software development team, you will be responsible for designing and developing cutting-edge software solutions for our warfighter products.Key ResponsibilitiesParticipate in software design...

  • Senior Systems Engineer

    5 days ago

    Goleta, California, United States Raytheon Full time

    About the RoleWe are seeking a highly skilled Senior Systems Engineer to join our Electronic Warfare team at Raytheon. As a key member of our team, you will be responsible for designing and developing innovative solutions for our Advanced Airborne RF business area.Key ResponsibilitiesDetermine product or system requirements based on customer information and...