Engineer II

3 weeks ago

Waterford Connecticut, United States Solvenow Inc. Full time
Job SummaryThe individual shall have relevant welding experience per Section 7.0 of ANSI B5.16.

Additional acceptable relevant welding experience includes welding, weld planning, preparing weld data records, preparing weld repair dispositions, designing welds, analyzing welds, inspecting welds, qualifying welding procedures and personnel, performing metallographic analysis of welds, reviewing weld procedures, and preparing documentation necessary for R Stamp or ASME XI Repair Replacement activities involving welding.

Practical experience developing and qualifying procedures for the following welding processes: SMAW, manual GTAW, FCAW, GMAW, and Brazing. 

Practical experience on joining, PWHT, welding metallurgy, and mechanical properties for carbon steels, low alloy steels, austenitic and martensitic stainless steels, Cu based alloys, and Ni based alloys. Completion of ASME IX training or at least 3 years of experience using the ASME IX code

able to perform difficult and complex work requiring thorough knowledge of the subject matter and significant experience within functional assignment area. 

Schedules and coordinates major segments of complex projects to meet cost and time objectives. 

Plans and conducts work requiring judgment in the independent evaluation, selection, adaptation and modification of standard techniques, procedures and criteria. 

Devises new approaches to problems encountered and develops engineering criteria ensuring compliance with design criteria and standards. 

At higher levels of proficiency within this classification, incumbents are expected to provide technical expertise and/or team leadership as needed. 

May be required to apply intensive and diversified knowledge of engineering principles and practices to major projects that have significant impact on programs in varied areas and related fields. 

May serve as a technical expert on engineering related legal and regulatory issues to outside entities. 

Perform other duties as requested or assigned.

Required Knowledge, Skills, Abilities & Experience3+ years engineering experience is required for Engineer II/Engineering Technical Specialist II; relevant welding experience as defined in Section 7.0 of ANSI B5.16. 

Additional acceptable welding experience includes welding, weld planning, preparing weld data records, preparing weld repair dispositions, designing welds, analyzing welds, inspecting welds, qualifying welding procedures or personnel, performing metallographic analysis of welds, reviewing weld procedures, or preparing documentation necessary for R Stamp or ASME XI Repair Replacement activities involving welding. 

Experience developing and qualifying procedures for the following welding processes: SMAW, manual GTAW, FCAW, GMAW, and Brazing. 

Practical experience on joining, PWHT, welding metallurgy, and mechanical properties for carbon steels, low alloy steels, austenitic and martensitic stainless steels, Cu based alloys, and Ni based alloys. Completion of ASME IX training or at least 3 years of experience using the ASME IX code. 

Skilled in use of advanced techniques and modification and extension of theories, precepts and practices of the field and related sciences and disciplines.

Strong leadership skills with proven ability to serve as team project lead. 

Strong oral and written communication skills (includes technical writing)

Ability to think analytically and solve complex problems;

Ability to interpret codes, regulations and practices; 

In depth knowledge of various computer applications, with the ability to manipulate computer applications and perform engineering calculations using applicable software programs (e.g. MATLAB, Excel, etc.); 

Effective working independently or in team environment; 

Proven decision making skills; 

Ability to process information quickly and manage multiple tasks; 

Strong planning and project management. 

REQUIRED ENGINEERING CRITERIA: 

For placement of a candidate in the Engineer job series, the following criteria must be met: 

Possess a 4-year Engineering degree from an ABET accredited Engineering program based on the year that the Engineering program was accredited by ABET, or Possess a 4-year Engineering degree from an institution outside of the U.S. which is accredited through the country's own Engineering accrediting body under the Washington Accord as a full signatory, and is a degree that was recognized by the country's accrediting body on or after the date that full signatory status was achieved, or Possess a 4-year degree in Engineering (non-ABET accredited), Physics, Chemistry, Math or Engineering Technology and a post-graduate Engineering degree from an institution where the undergraduate degree in the same Engineering discipline is ABET-accredited based on the year the Engineering program was accredited by ABET, or Holds or has previously held a valid U.S. Professional Engineer license.

Education RequirementsRequired degree (equivalency not accepted in lieu of required degree):

Bachelor

Required discipline(s): Engineering Applicants must hold a BS Degree (or higher) in Mechanical Engineering, Metallurgical Engineering, Materials Engineering, or Materials Science from ABET Accredited engineering program. 

Engineering Technical Specialist applicants may hold a BS degree in a related technical field.

Licenses, Certifications, or Quals DescriptionDepending on functional responsibilities and location of position must review ANS 3.1 12/79, ANSI N18.1-1971 or ANSI/ANS 3.1-1993 and DOM-QA-1 as appropriate.

Additional Notes:-Our Client is hiring an Engineer II or Engineer Ill OR Engineering Technical Specialist II or Engineering Technical Specialist III in charge of the Welding Program. 

Engineering Technical Specialist series is differentiated from the Engineer in that the Technical specialist does not hold an ABET accredited Engineering degree, but does hold a technical degree and/or the required engineering experience necessary to meet the job requirements.

5+ years engineering experience is required for Engineer III/Engineering Technical Specialist III

Military service members and veterans with ranks from E3-E5, W1-W2, or O1-O3 and above, plus appropriate equivalent combination of education and years of experience as outlined are strongly encouraged to apply.

  • Engineer II

    3 weeks ago

    Waterford, Connecticut, United States Solvenow Inc. Full time

    Job SummarySpecific duties include: Monitoring and trending of electrical system health Preparation of engineering technical evaluations Development of maintenance strategies and corrective action plans and supporting development of design change documentation. Perform other duties as requested or assigned The candidate will work in a broad range of...

  • Engineer II

    3 weeks ago

    Waterford, United States Solvenow Inc. Full time

    Job SummarySpecific duties include:Monitoring and trending of electrical system healthPreparation of engineering technical evaluationsDevelopment of maintenance strategies and corrective action plans and supporting development of design change documentation.Perform other duties as requested or assignedThe candidate will work in a broad range of Electrical...

  • Engineer II

    2 weeks ago

    Waterford, United States Solvenow Inc. Full time

    Job DescriptionJob DescriptionJob SummarySpecific duties include:Monitoring and trending of electrical system healthPreparation of engineering technical evaluationsDevelopment of maintenance strategies and corrective action plans and supporting development of design change documentation.Perform other duties as requested or assignedThe candidate will work in...

  • Engineer II

    1 week ago

    Waterford, United States Solvenow Inc. Full time

    About the job Engineer II / Engineer Ill Job Summary The individual shall have relevant welding experience per Section 7.0 of ANSI B5.16. Additional acceptable relevant welding experience includes welding, weld planning, preparing weld data records, preparing weld repair dispositions, designing welds, analyzing welds, inspecting welds, qualifying welding...

  • Engineer II

    2 weeks ago

    Waterford, United States Solvenow Inc. Full time

    Job DescriptionJob DescriptionJob SummaryThe individual shall have relevant welding experience per Section 7.0 of ANSI B5.16. Additional acceptable relevant welding experience includes welding, weld planning, preparing weld data records, preparing weld repair dispositions, designing welds, analyzing welds, inspecting welds, qualifying welding procedures and...

  • Welding Engineer

    2 days ago

    Waterford, United States System One Holdings, LLC Full time

    System One is seeking an experienced Welding Engineer to support a nuclear plant in Waterford, CT. This is a full-time, direct hire opportunity offering a comprehensive compensation and benefits package including relocation assistance (if applicable). This is a mid-level to top progression level position responsible for performing difficult and complex work...

  • Electrical Systems Engineer

    2 days ago

    Waterford, United States System One Holdings, LLC Full time

    System One is currently seeking two experienced engineers for the Electrical and I&C Systems department in Site Engineering for our nuclear power plant client located in Waterford, CT. This is a full-time, direct hire opportunity offering a comprehensive compensation and benefits package including relocation assistance (if applicable). Assist with...

  • Engineer II/Senior/Specialist

    2 weeks ago

    Groton, Connecticut, United States General Dynamics Electric Boat Full time

    Overview: D435 Main Propulsion Machinery is in search of Propulsor Engineer II/Senior/Specialist. As integral members of the Navy Propulsor Team, Engineers in this group are dedicated to providing high quality engineering, design, and manufacturing and construction support services to the Navy, New Construction Shipyards, and Maintenance Naval Shipyards. The...

  • Electrical Engineer III

    3 weeks ago

    Waterford, United States Axelon Full time

    Electrical Engineer III (Gen) Waterford, CT 12+ Month Contract, W 2 Pay range: 70 - 95/hr, W 2 3 openings for Electrical Engineers II and III. Local Candidates Preferred, per diem not eligible. Systems Engineering is in need of experienced candidates with Nuclear or other industrial background. Technically proficient engineers to assist with schematic...

  • Mechanical Engineer I

    3 weeks ago

    Groton, Connecticut, United States General Dynamics Electric Boat Full time

    Overview: Electric Boat Nondestructive Test (NDT) Engineering is seeking a motivated individual to join its NDT New Technologies Team. The NDT Engineering New Technologies Team leads research & development (R&D) efforts to test and implement emerging NDT methods (e.g. Phased-Array Ultrasonic Testing, Computed Radiography, etc.) for use in Electric Boat’s...

  • NDT Engineering Examiner

    3 weeks ago

    Groton, Connecticut, United States General Dynamics Electric Boat Full time

    Overview: Phased-Array UT (PAUT) - NDT Engineering Level III Examiner / Senior / Specialist Location: Groton Shipyard / Groton, Connecticut   The successful candidate will join the Nondestructive Test (NDT) Engineering Services organization within Electric Boat (EB) and support Phased Array Ultrasonic Testing (PAUT) shipyard development and...

  • Engineer - Systems

    2 weeks ago

    Groton, Connecticut, United States General Dynamics Electric Boat Full time

    Overview: A diverse skill-set is needed for execution of the scope of multiple tasks ranging from detailed design to construction support to system testing to sustainment.  Engineers use a design-build-sustain approach and work in a team environment to interface with designers, component and system engineers, operations, planning and testing organizations...

  • Substation Engineer II

    7 days ago

    Windsor, Connecticut, United States TRC Companies, Inc. Full time

    About Us: Groundbreaker. Game changer. Pioneer.   TRC has long set the bar for clients who require more than just engineering, combining science with the latest technology to devise innovative solutions that stand the test of time. From pipelines to power plants, roadways to reservoirs, schoolyards to security solutions, clients look to TRC for...

  • Mechanical Engineer

    2 weeks ago

    Groton, Connecticut, United States General Dynamics Electric Boat Full time

    Overview:   Department 492 engineers will work in a Design/Build Team environment and be responsible for the completion of design studies and analysis, preliminary and detail component design, system engineering, material selection and manufacturing reviews. Engineers will provide support for the development, installation and test of submarine systems in...

  • Engineer I/II

    2 weeks ago

    Groton, Connecticut, United States General Dynamics Electric Boat Full time

    Overview: Department 498 is responsible for the design of Columbia Class HM&E Mechanical Systems and Hull Valves and Standard Valves, and supporting procurement of material for these systems and installation and test on the ship. Department 498 engineers will provide support for the development, installation and test of Columbia Class submarine systems in...

  • SSN(X) Propulsor and Shafting Engineer

    3 weeks ago

    Groton, Connecticut, United States General Dynamics Electric Boat Full time

    Overview: D435 Main Propulsion Machinery is in search of a SSN(X) class Propulsor and Shafting Engineer II/Senior/Specialist. Engineers in this group will be responsible for providing high quality and efficient engineering and design services to both the Navy Propulsor and Shafting Team. Engineers will also be responsible for the project management and...

  • Engineer I/II

    2 weeks ago

    Groton, Connecticut, United States General Dynamics Electric Boat Full time

    Overview: The Payload Launch Control Engineering department applies highly diversified skills to produce weapon and payload launching electronics for US Navy nuclear submarines. Leveraging the latest state-of-the-art technologies, Payload Launch Control systems are provided for Weapon Launch Control; Payload Launch Control; Weapons Shipping and Handling; and...

  • NDT Engineer Senior

    4 weeks ago

    Groton, Connecticut, United States General Dynamics Electric Boat Full time

    Overview: The Non-Destructive Test Engineering (NDTE) Supplier Support Group has a challenging but rewarding opportunity for the right individual.  The NDTE Supplier Support Group provides technical guidance to suppliers as well as internal and external customers on the subject of Non-Destructive Testing (NDT) required for the construction and maintenance...

  • D493 Structural Engineer I, II, Sr.

    3 weeks ago

    Groton, Connecticut, United States General Dynamics Electric Boat Full time

    Overview: D493 – Pressure Hull and External Structures - Engineers are responsible for supporting the detail design and analysis of submarine pressure hull structures including tanks, trunks, and bulkheads as well as structures external to the pressure hull including the bow, sail, super structure, stern, and control surfaces. Responsibilities include...

  • D430 Strategic Weapons Systems Engineering

    3 weeks ago

    Groton, Connecticut, United States General Dynamics Electric Boat Full time

    Overview: D430 Strategic Weapons Systems Engineering   Strategic Weapons Systems (SWS) Engineering, Department 430, develops in-house embedded systems and integrates government furnished equipment to support the Strategic Weapons Systems of the Columbia Class and other submarine classes.   Department 430 offers a flexible work arrangement that allows...